CNET CWP-905 Manuale utente
CWP-905
Wireless-N PCI Adapter
User Manual
Version: 1.0
(July, 2007)
Table of Contents
Chapter 1: Introduction ...........................................................................................3
1.1 About CWP-905...................................................................................... 3
1.2 Main Features.........................................................................................3
1.3 System Requirements.......................................................................... 4
1.4 Getting to Know CWP-905 .................................................................. 4
Chapter 2: Driver Installation and Configuration .............................................5
2.1 Network Card Installation..................................................................5
2.2 Connect to Wireless Access Point ............................................... 11
2.3 Connection Profile Management................................................... 21
2.4 View Network Statistics and Link Status.....................................33
2.5 Advance Settings .............................................................................. 37
2.6 QoS Settings....................................................................................... 40
2.7 WPS Configuration............................................................................ 43
2.8 About ....................................................................................................49
Chapter 3: Soft-AP Function ................................................................................51
3.1 Switch to AP Mode and Basic Configuration.............................51
3.2 Security Settings ............................................................................... 56
3.3 Access Control................................................................................... 58
3.4 Connection table................................................................................ 61
3.5 Event Log.............................................................................................63
Chapter 4: APPENDIX ............................................................................................ 65
4.1 Troubleshooting.................................................................................65
4.2 Glossary............................................................................................... 67
2
Chapter 1: Introduction
1.1 About CWP-905
Thank you for purchasing this high-speed 802.11 b/g/n (Draft 2.0) wireless adapter. The
Wireless-N PCI Adapter can be installed in most desktops and provides true flexibility by
allowing the computer to be positioned almost anywhere in the building without the cost and
hassle of running network cables. Using the wireless PCI adapter, you don't have to worry
about drilling holes in your walls and climbing through the attic or cellar to get connected to the
network. Once installed and connected, you can keep in touch with friends and work through
e-mail, instant messaging and chat rooms as well as sharing files and other network resources
such as printers and network storage with other computers.
The Wireless-N PCI Adapter connects to 802.11n networks at an incredible speed of 300Mbps!
And for added versatility, it also interoperates with all Wireless-G and B products found at
homes, businesses, and public wireless hotspots around the country.
1.2 Main Features
The following lists the main features of the Wireless-N PCI Adapter.
• Complies with IEEE 802.11n Draft 2.0 and IEEE 802.11g/b standards
• 6 times faster speeds than Wireless-G
• Interoperates with existing Wireless-G/B equipments
• Advanced WPA (Wi-Fi Protected Access) encryption, 64/128-bit WEP and AES/TKIP
provide maximum wireless security
• Cisco CCX V1.0, V2.0 and V3.0 compliance
• Supports operating system: Windows 2000/XP/XP64/Windows Vista
• Ease of Installation and Use
3
1.3 System Requirements
• An empty PCI slot
• Windows 2000, XP, or Vista operating system
• CD-ROM drive
• At least 100MB of available disk space
1.4 Getting to Know CWP-905
1. PCI Interface
2. Antennas
3. ‘Link’ LED
4. ‘Tx/Rx’ LED
LED Name Light Status Description
On Linked to a wireless access pointLink
Off Not linked to any wireless access point
Blinking Transferring / receiving dataTx/Rx
Off No wireless activity
4
Chapter 2: Driver Installation and Configuration
2.1 Network Card Installation
Please follow the following instructions to install your new wireless network card:
1. SWITCH THE COMPUTER OFF, remove the cover and insert the wireless network card
into an empty PCI slot of your computer.
2. Install all three antennas on the wireless network card, and make sure the antennas are
securely installed. To improve radio reception, please adjust antennas to the position
shown in the picture.
5
3. Switch the computer on, the following message will appear on your computer, please click
‘Cancel’.
4. Insert the Auto-Install CD into your CD-ROM drive. Unless you have disabled the auto-run
feature of Windows, the AutoPlay Menu should appear automatically. If not, you can
manually access the installation by clicking the Start button and choosing Run. In the
drop-down box type D:\ AUTORUN.EXE (where D: is the drive letter for your CD-ROM
drive).
Alternately, double-click My Computer and double-click on the CD drive icon.
Click on CWP-905 to install driver and utility for your wireless network card.
6
5. Please read the end user license agreement and click ‘Yes’ to accept license agreement.
6. You can choose the configuration tool used to configure the wireless network card here.
It’s recommended to select ‘Ralink Configuration Tool’, which provides fully access to all
function of this wireless network card. If you prefer to use the wireless configuration tool
provided by Windows XP or Vista, please select ‘Microsoft Zero Configuration Tool’, then
click ‘Next’.
7
7. There are two wireless performance mode you can select here:
Optimize for WiFi mode or
Optimize for performance mode
If you want to enhance wireless performance, please select ‘Optimize for performance
mode’. However, wireless compatibility is not guaranteed in this mode. If you want to use
this mode, you may not be able to communicate with older wireless devices and wireless
access point, such as 802.11b devices, but the data transfer rate will be enhanced in this
mode. You can select this mode when you only plan to communicate with 802.11 Draft-N
devices.
If you want to keep compatibility and communicate with older wireless devices, please
select ‘Optimize for WiFi Mode’.
When you select one mode, please click ‘Next>’ to continue. If you see ‘Found New
Hardware’ message again, please ignore it and wait.
8
8. Please click ‘Install’ to run the driver installation process.
9. When you see this message, please click ‘Finish’ to complete the driver installation
process.
9
10. A new icon will appear at lower-right corner of your computer desktop, you can put the
mouse cursor on the icon, and the status of wireless card will be displayed as a popup
balloon.
HERE!
11. When you want to configure your wireless connection, please right click on this icon, and a
popup menu will appear. You can click ‘Launch Config Utilities’ to start configuration
program.
If you want to close configuration utility, please click ‘Exit’.
10
Altri manuali per CWP-905
3
Indice
Altri manuali CNET Scheda PCI
CNET
CNET CWP-905 Manuale utente
CNET
CNET CWP-905 Manuale utente
CNET
CNET CWP-854 Istruzioni per l'installazione
CNET
CNET CNMP-511 Manuale utente
CNET
CNET CNproG-2000S Manuale utente
CNET
CNET Pro200 Manuale utente
CNET
CNET CWP-800 Manuale utente
CNET
CNET CWP-854 Manuale utente
CNET
CNET CWP-854 Manuale utente
