2
ENGLISH
Table Saw
Art.no 40-8280 Model ST12
Please read theentire instruction manual before use and save it for future reference. Wereserve theright for any
errors in text or images and for making any necessary technical changes to this document. Ifyou should have
any questions concerning technical problems please contact our Customer Services.
Safety
• Make sure that everyone who operates thetable saw has read and understood thesafety instructions.
• The table saw must only be used if it is functioning correctly. Carefully observe all thewarnings and safety
instructions outlined in this manual. Ensurethat there are no disturbances that may affect workplace safety.
• Ensure that all safety devices are in place when thetable saw isused.
• Only use saw blades which conform to EN 847-1.
• Keep all thetable saw’s safety instructions accessible and in readable condition.
• Make sure that thetable saw is standing on asolid foundation.
• Check that none of theelectrical cables are damaged and that they are all properly connected.
• Keep children away from thetable saw when it is connected to thepower supply.
• This product must not be used by anyone (including children) suffering from physical or mental impairment.
Thisproduct should not be used by anyone who has not read theinstruction manual unless they have been
instructed in its use by someone who will take responsibility for their safety.
• Operators of thetable saw must not be distracted.
• If a second person is working next to thetable saw to take care of workpieces, thetable saw must
be equipped with atable extension. Thesecond person must never stand anywhere but at theend of
theextension table.
• Keep theworking area tidy. Cluttered surfaces and benches invite accidents.
• Wear suitable attire. Donot wear loose-fitting clothing or jewellery; they could be caught in moving parts.
Non-slip shoes are recommended for outdoor work. Wearahairnet or similar if you have longhair.
• Always use safetywear. Wearsafety glasses. Useadust mask or dust filter when working in dusty environments.
• Make sure theblade is fitted theright wayround.
• The table saw’s safety devices must not be removed or disabled.
• Disconnect thetable saw from thepower supply before servicing, changing attachments, changing blades
or cleaning thetable saw or measuring any workpiece placed onit.
• Disconnect thetable saw from thepower supply before correcting any potential hazards.
• Dust extraction equipment must be used when creating large amounts ofdust.
• Never use blades which are defective, blunt or of theincorrect size.
• High speed steel blades must not beused.
• The riving knife is animportant safety device which steers theworkpiece and prevents theblade for binding
in thecut and theworkpiece from kicking back.
• The blade guard must always be in place when making acut.
• The blade guard must be horizontal over thesawblade.
• Always use apush stick when rip-cutting narrow stock i.e. thinner than 120 mm. Thepush stick prevents
hands from coming too close to thesawblade.
• Replace thetable insert if it is damaged in anyway.
• Switch off themotor and disconnect thetable saw from thepower supply before leaving theworkplace.
• Disconnect thetable saw from thepower supply before moving it. Makesure that thetable saw is
connected correctly before switching iton.
• Servicing and repair work must only be carried out at anauthorized service centre.
• All safety devices and guards must be replaced immediately following any repairs or servicing.
• Never let children play with theproduct.
• Never use thetable saw if you are tired or under theinfluence of drugs, alcohol or medication.
