2.To erase all messages, simply press
and hold DELETE while the system is
not in use.VOICE HELP will inform you
when all messages have been deleted.
When delete is finished, the display will
read “0”.
To Screen A Call From The
Base
If the phone rings while you are at the base
and the handset is in the cradle, you may
determine if you want to answer the call or
not.
1. Let the system answer and listen to the
caller’s voice over the speaker. If you wish
to take the call, lift the handset.
2. If you do not wish to take the call, do
nothing and the system will record the
message.
To Record A
Memo At The Base
1. Press and hold the MEMO/2WAY
RECORD button. Display will read – –
2.VOICE HELP will direct you to listen
for a beep, then record your memo.
3. MEMO button will flash to indicate
that there is a message, and memo
message will be added to display.
Use this feature to leave a message for
someone who will be picking up
messages–it’s an “electronic” note!
To Retrieve A Memo
From The Base
Press and release the PLAY button, just
the same as if you had received a
telephone message.
Your new Cobra Intenna Cordless Phone
Answering System is equipped with an all-
digital answering system built right in.That
means there are no cassette tapes to
malfunction, break or replace. It allows a full
20 minutes recording time (most tapes
allow only 15 minutes per side) and permits
each caller 2 full minutes to leave you a
message (most messages average only a
minute each).
Getting Ready
1. Make sure digital display is on. If
display is blank, press
ANSWER/ON/OFF button and display
will light
2. Set the NUMBER RINGS selector,
located on the side of the base:
2 position: System answers on the
2nd ring
5 position: System answers on the
5th ring
T/S (toll-saver): System answers on
5th ring if there are no messages
waiting and on the 2nd ring if there
are.This is useful if you will be calling
in to retrieve messages long
distance or from a pay phone. If the
phone rings 3 times, you know you
have no messages and may hang up
without paying for the call.
NOTE: If you are using the Mailbox feature,
please refer to the specific guidance on
pages 20-21.
To Set Clock And Record Your
Outgoing Message
Please follow instructions in“Getting Set-
Up” Section, p.9.
To Access Your Incoming
Messages
1.The number of messages in the
general box will be shown on the LED
display.
2. Press and release the PLAY button to
hear messages from the beginning.
VOICE HELP and the LED display will
indicate number of message being
played.
3.To bypass a message, press and
release SKIP button.
4.To hear a message over, press and
release REPEAT button.
5.To go forward or backward to any
message press SKIP or
REPEAT until the number of the
message you wish to hear appears in
the LED display window. Release the
button and that message will play.
6. If you wish to hear only part of a
longer message again (to get a name or
phone number, for example), locate the
message and “scroll” through by
pressing and holding PLAY. It will skip
ahead by 10 second jumps (identified
by a beep). Resume regular play of
message anytime by releasing PLAY.
7. While listening to messages, you may
pause or stop the system.To do so,
press STOP and the system will pause
for 30 seconds.The LED display will
indicate PA (pause).
A. Resume message play by pressing
and releasing the PLAY button.
B. Play next message by pressing and
releasing the SKIP button.
C. After all messages have played, a
beep will sound and VOICE HELP
will inform you that all messages
have been played and that they are
being saved.
To Erase Your Messages
1.To erase a message as it is playing,
press and release the DELETE button.
Only the message being played will be
deleted and the system will move on to
the next message.The message
number will change at the end of play.
VOICE HELP will inform you that the
message is being deleted, but that you
may still save it by pressing the
REPEAT button. Do nothing, and it
will be deleted.
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
17
1-773-889-3087
NEED HELP?
AN8630
