Part I: General Safety Rules
G. Never make adjustments or repairs with the engine running. Shut down the
engine, disconnect the spark plug wire, keeping it away from the spark plug to
prevent accidental starting, wait 5 minutes before making adjustments or
repairs.
H. Never tamper with the engine’s governor setting. The governor controls the
maximum safe operation speed and protects the engine. Over-speeding the
engine is dangerous and will cause damage to the engine and to the other
moving parts of the machine. If required, see your authorized dealer for engine
governor adjustments.
I. Keep combustible substances away from the engine when it is hot.
J. Never cover the machine while the exhaust is still hot.
K. Do not operate the engine with the air cleaner or the carburetor air intake cover
removed. Removal of such parts could create a fire hazard. Do not use
flammable solutions to clean the air filter.
L. The exhaust and engine become very hot and can cause a severe burn; do not
touch.
General Safety
WARNING
Operating this Wood Chipper safely is necessary to prevent or minimize the risk of
death or serious injury. Unsafe operation can create a number of hazards for you.
Always take the following precautions when operating:
A. Your Wood Chipper is a powerful tool, not a plaything. Exercise extreme
caution at all times. The machine is designed to Chip Wood. Do not use it for
any other purpose.
B. Know how to stop the Wood Chipper quickly.
C. Never operate your unit on a slippery, wet, muddy, or icy surface. Exercise
caution to avoid slipping or falling.
D. See manufacturer’s instructions for proper operation and installation of
accessories.
E. Never use the machine without ensuring that all guards and shields are in
place.
F. Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter
standard parts on the Wood Chipper. This includes all shields and guards.
Modifications to your machine could cause personal injuries and property
damage and will invalid your warranty.
G. If the machine starts to make an unusual noise or vibrate, shut down the engine,
disconnect the spark plug wire, keeping it away from the spark plug to prevent
accidental starting, wait 5 minutes for engine to cool down, then inspect for
damage. Vibration is generally a warning of trouble. Check damaged parts and
clean, repair and/or replace as necessary.
