Cobra IG20SI Manuale utente

4-Stroke Engine

INVERTER GENERATOR

USER MANUAL

Model：IG20SI

●Cobra reserves the right of modification of product and revision of the manual without any notice.

●Take this manual as a part of the generator. If the generator is resold, it is required to take the manual along

with the generator.

●This manual contains how to correctly operate the generator, please read carefully before using the generator.

Correct and safe operation will guarantee your safety and extend the working life of generator.

●Cobra will continuously innovate and develop its products both in design and quality. The content of this

manual may have minor difference from the updated product. Please contact your supplier for further support.

Thank you for purchasing a Cobra Inverter Generator

IMPORTANT SAFETY NOTICE:

The emission of engines contains poisonous carbon monoxide. Use the generator

only outdoors and away from people.

NEVER use petrol powered equipment in a home, garage, tent, camper-van,

caravan, motor-home or boat. Even if doors, windows or vents are open. Only use

outdoors, well away from doors, widows and openings. Prevent inhaling exhaust

fumes.

CONTENT

Hourmeter

1.SAFETY INFORMATION

•Read and understand the user manual before

using the generator.

•The emission of engine contains poisonous

carbon monoxide. Use the generator in the

ventilated condition.

•Do not touch the hot muffler, when the generator

is running, or before cooling.

•Petrol is explosive and flammable in the

specified conditions when refueling, the

generator needs to be stopped and be kept

cigarette and fire source away.

•Do not connect to the building’s electrical system

or other generator, in order to avoid the electric

shocks and fires.

•The running generator must keep one meter

To ensure personal and property safety, please

carefully read the following information.

<<04>>

WARNING

distance with constructions and other

electrical appliances at least.

•Place the generator on the leveled surface, in

order to avoid overturning or spilling fuel.

•Children and pets should be keep away the

operation area.

•Do not operate with wet hand.

•Do not expose the generator to rain, moisture

or snow.

•Place the generator at least 1 m away from

buildings or other equipments during

operation.

•The major repair work should be carried out

only by professionally trained person.

•Do not use the generator in underground

working

•Do not use the generator in potentially

explosive atmospheres

•Use personal protective equipment: glove,

mask, earplugs, when you operate or maintain

the generator

<<05>>

SAFETY LABEL:

<<06>>

2. SAFETY LABLE LOCATIONS

<<07>>

CHOKE

KNOB

FUEL CAP

VENT LEVER

FUEL CAP

AIR CLEANER

MAINTENANCE COVER

STARTER GRIP

CONTROL

PANEL

SPARK PLUG

MAINTENANCE

COVER MUFFLER

3. C IDENTIFICATIONOMPONENTS

FUEL SWITCH

ENGINE SWITCH

ECON. SW

3.1) Control Panel

<<08>>

3.2) ECON. SW (Economy control switch):

“ON”()

•When the economy control switch is turned to

“ON”( ),the engine keeps running at idle state

automatically when the electrical appliance is

disconnected,and it will return to the proper speed

with the requirement of electrical load.

ONOFF

ECON. SW

DC Circuit Protector

DC Receptacle

Ground Terminal

AC Receptacle

Hourmeter

Engine Switch

Fuel Switch

ECON. SW

●The “ON”( ) is recommended to minimize the fuel

•Under the condition of protection, the overload

indicator light(red) is on, the "RESET" button can

recover the output of the generator, and

unnecessary to restart engine overall.

•Press and hold the “RESET” button for one second,

until the overload indicator light (red)

<<09>>

NOTE

•When a high load electrical appliance is

connected instantaneously, in order to reduce

voltage change, turn the economy control switch

to the“OFF”( )position.

•In DC operation, turn the economy control switch

to the “OFF”( )position.

•Connect both AC load and DC load, turn the

economy control switch to the “OFF”( ) position.

NOTE

•For protection condition, the output indicator

light (green) is off, and the overload indicator

light (red) is on.

•Every starting the engine the "RESET" button is

available within 5 times. Otherwise, you need

restart the engine.

“OFF” ( )

When the economy control switch turns to the “OFF”

( ) position engine runs at high speed.

will be off, and output indicator light (green)

will be on.

•Under the non-overloading condition, the

"RESET" is supposed to be ineffective.

•Press DISP; then lighten the backlight.

•Display voltage/frequency, engine speed,

cumulative working time in turn.

NOTE

3.3) Hourmeter

•No button in 10S, the backlight shut off.

RESET DISP

backlight

4. PRE- OPERATION CHECK

WARNING

Be sure the generator is on the leveled surface and

the generator is stopped.

Remove the oil filler cap, fill the specified amount of

the recommended oil and then tighten the oil filler

cap .

NOTE

•Do not tilt the generator when adding engine

oil. This could result in overfilling and

damage to the engine.

4.1) Check Oil Level

NOTE

•Using non-detergent or 2-stroke oil could

shorten the engine’s working life.

•Using the high quality engine oil with strong

detergents

•Using 4-stroke engine oil, certified to meet or

exceed API standards: SG, SF ,SAE stickiness

rating:

-30 -20 -10 0 10 20 30 40℃

15W-40

10W-40

10W-30

5W-30

-20 020 40 60 80 100F

NOTE

Carefully use and store the engine oil, avoid

getting dirt or dust into the engine oil.

Mixing different kinds of engine oil is prohibited.

<<10>>

OIL FILLER

CAP

OIL FILLER HOLE

UPPER LEVEL

OIL POT

Oil Capacity:0.41L

Indice

Altri manuali Cobra Invertitore

Cobra

Cobra CPI 130 Manuale utente

Cobra

Cobra CPI1590-CBL Manuale utente

Cobra

Cobra CPI 2575 Manuale utente

Cobra

Cobra 800 Watt Power Inverter CPI 880 Manuale utente

Cobra

Cobra CPI 200 CH Manuale utente

Cobra

Cobra CPI M1500 Manuale utente

Cobra

Cobra CPI 2575 Manuale utente

Cobra

Cobra POWER 500W Manuale utente

Cobra

Cobra CPI 850 Manuale utente

Cobra

Cobra MARINE CPI M800 Manuale utente

Cobra

Cobra CPI 880 Manuale utente

Cobra

Cobra CPI 450 Manuale utente

Cobra

Cobra CPI 150 Manuale utente

Cobra

Cobra CPI 200 CH Manuale utente

Cobra

Cobra CPI490 Manuale utente

Cobra

Cobra PRO Series Manuale utente

Cobra

Cobra CPI 800 Manuale utente

Cobra

Cobra CPI 1550 Manuale utente

Cobra

Cobra CPI M400 Manuale utente

Cobra

Cobra CPI 1575 Manuale utente

Cobra

Cobra CPI 875 Manuale utente

Cobra

Cobra CPI-2500 Manuale utente

Cobra

Cobra CPI 2550 Manuale utente

Cobra

Cobra PURE SHINE 400P Manuale utente

Manuali Invertitore popolari di altre marche

Fourgroup

Fourgroup Easy Manuale utente

Velleman

Velleman PI300M Manuale utente

Sungrow

Sungrow SG350HX-US Manuale utente

WilTec

WilTec 61897 Manuale utente

SMA

SMA SUNNY BOY STORAGE 2.5 Manuale utente

Simplicity

Simplicity LANDLORD 316 Manuale utente

Santak

Santak SMAX 3000 Manuale utente

ATON

ATON RA.Store-3 Manuale utente

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manuale utente

Tektronix

Tektronix CFG250 Manuale utente

Champion

Champion 200989 Manuale utente

Vanner

Vanner 20-500 Series Manuale utente

GE GEP Manuale utente

Astrel Group

Astrel Group Power Reducer Guida rapida

MULTIQUIP

MULTIQUIP GDP-5H Guida

GoWISE

GoWISE PS1007 Manuale utente

Promate

Promate PM13500D ES Manuale utente

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manuale utente