Bluetooth (wireless) connection (versions with Bluetooth only)
Wireless connection on your PC requires Bluetooth v2.0 (hereinafter
referred to as BT) or higher. Connection is made in the following sequence:
1. Connect the emulator to the ECU or via USB. At the same time, the red
indicator of the BT module should blink quickly (about 3 times / sec)
2. Turn on the BT module of the PC and pair with a new device (the name
is usually “FlashOnline BT”). Password 1234 or 0000 (Necessarily).
3. After successful pairing, 2 virtual COM ports should appear (see Device
Manager), one of which will be used for data exchange. How correctly programs
(TunerPRO RT, CobraRTP Utility) find the right port automatically if the device
is turned on and ready to pair.
Attention! When working via BT, the emulator must not be connected
via USB, otherwise a conflict is possible!
Notes:
1. After each disconnection of the emulator (for example, when the ignition is
turned off), in order to continue working in the software, it is necessary to reconnect
(in the program).
2. Many ECUs do not de-energize immediately after the ignition is turned off, and
continue to work for some time (20-60 seconds), keep this in mind, although on the
other hand this is an advantage, given p1.
You can check the device using our software - CobraRTP Utility
(https://cobrartp.com/en/cobrartp-utility):
