Cocraft DPL-118D Manuale utente

ENGLISHSVENSKANORSKSUOMIDEUTSCH

Important!

Read the entire instruction manual

carefully and make sure that you fully

understand it before you use the

equipment. Keep the manual for future

reference.

Viktig information:

Läs hela bruksanvisningen noggrant och

försäkra dig om att du har förstått den

innan du använder utrustningen. Spara

bruksanvisningen för framtida bruk.

Viktig informasjon:

Les disse anvisningene nøye og forsikre

deg om at du forstår dem, før du tar

produktet i bruk. Ta vare på anvisningene

for seinere bruk.

Tärkeää tietoa:

Lue nämä ohjeet huolellisesti ja varmista

että olet ymmärtänyt ne, ennen kuin

alat käyttää laitetta. Säilytä ohjeet

myöhempää tarvetta varten.

Wichtiger Hinweis:

Vor Inbetriebnahme die komplette

Bedienungsanleitung sorgfältig

durchlesen und aufbewahren.

HD 3.6-LI

AUTOMATIC SPINDLE LOCK

3.6 V

18-3556 ∙40-8763

CORDLESS SCREWDRIVER

SKRUVDRAGARE SKRUTREKKER

RUUVINVÄÄNNIN AKKUSCHRAUBER

Ver. 20160315

Original instructions

Bruksanvisning i original

Originalbruksanvisning

Alkuperäinen käyttöohje

Original Bedienungsanleitung

Art.no Model

18-3556 DPL-118D

40-8763 DPL-118D

ENGLISH

3.6 V Cordless Screwdriver

Art.no 18-3556 Model DPL-118

40-8763 DPL-118

Please read theentire instruction manual before use and save it for future reference.

Wereserve theright for any errors in text or images and for making any necessary

technical changes to this document. Ifyou should have any questions concerning

technical problems please contact our Customer Services.

Safety

General safety instructions for cordless power tools

Warning! Readall theinstructions. Failure to comply with thefollowing instructions can

lead to electric shock, ﬁres and/or serious injury. Theterm “power tools” in thefollowing

warning text refers to your handheld mains operated or battery operated tool.

SAVE THESE INSTRUCTIONS.

The work area

a) Keep thework area clean and well illuminated. Cluttered and poorly lit areas

invite accidents.

b) Never use power tools in potentially explosive environments such as close

to ﬂammable liquids, gases or dust particles. Powertools generate sparks that

can easily ignite dust orfumes.

c) Keep children and other bystanders away from thearea where you are using

thepower tool. Distractions can cause you to lose concentration and control.

Electrical safety

a) Thepower tool’s plug must ﬁt correctly into thewall socket. Nevermodify

theplug in any way. Neveruse anadaptor together with earthed power tools.

Unmodiﬁed plugs and suitable wall sockets minimize therisk of electric shocks.

b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens

or refrigerators. There is anincreased risk of receiving anelectrical shock if your

body is earthed.

c) Do not expose thepower tool to rain or other wet conditions. Ifwater gets

inside, itincreases therisk of electric shock.

d) Do not abuse themains lead. Neveruse thelead to carry thetool or pull

theplug from thewall socket. Keepthelead away from heat, oil, sharp edges

and moving parts. Damaged or tangled leads increase therisk of electric shock.

ENGLISH

e) When using power tools outdoors, use anextension lead that is suitable for

this purpose. Theuse of anextension lead designed for outdoor use decreases

therisk of electric shocks.

f) If for some reason you must use apower tool in awet environment, always

connect it to themains via anearth-fault circuit breaker such as anRCD

(residual current device). UsinganRCD signiﬁcantly reduces thechances of you

receiving anelectric shock.

Personal safety

a) Pay attention to your actions and use common sense whenusing power

tools. Donot use power tools if you are tired or under theinﬂuence of drugs,

alcohol or medication. Onemoment of inattention while using apower tool may

result in serious injury.

b) Use protective equipment. Alwayswear safety glasses. Usingprotective

clothing such as dust masks, non-slip safety shoes, helmets and ear defenders

when needed decreases therisk of injury.

c) Avoid accidental starts. Makesure that thepower switch is set to OFF

before plugging themachine into awall socket. Nevercarry apower tool with

your ﬁnger on thetrigger and never connect thepower tool to awall socket when

theswitch is set to ON, as it may result in injury.

d) Remove all service tools/keys before switching thepower tool on. Aservice

tool left on any of thepower tool’s rotating parts may result in injury.

e) Do not overreach. Makesure you stand steady and well balanced at all times.

Thiswill allow you to have more control in unexpected situations.

f) Wear suitable attire. Donot wear loose-ﬁtting clothing or jewellery. Keephair,

clothes and gloves away from moving parts. Loose-ﬁtting clothes, jewellery or

long hair could potentially become caught in any moving parts.

g) If equipment for dust extraction or collection is available, make sure that

it is connected and used properly. Usingtechnical aids may decrease dust

related hazards.

Proper use and maintenance of power tools

a) Do not force thepower tool. Useapower tool suitable for thework you are

about to perform. Theproper power tool will perform thetask better and safer if

used at thecorrect feedrate.

b) Never use thepower tool if thepower switch does not switch thetool on and

off properly. Allpower tools that cannot be controlled by thepower switch are

dangerous and must be repaired.

c) Unplug thelead from thewall socket, before making any adjustments,

changing accessories or storing thepower tool. Theseprecautions reduce

therisk of thepower tool starting unexpectedly.

ENGLISH

d) Store any power tools that are not being used out of children’s reach. Donot

allow people who are unfamiliar with thetool or its functions to operate thetool.

Powertools can be dangerous if they fall into thehands of inexperienced users.

e) Maintaining power tools. Checkfor any incorrect settings, catching or broken

parts or anything else which may cause thepower tool to malfunction.

Ifsomething is damaged it must be repaired before use. Manyaccidents are

caused by poorly maintained powertools.

f) Keep tools sharp and clean. Properly maintained cutting tools with sharp blades

are less likely to jam and are easier to control.

g) Use thepower tool, accessories and similar according to theinstructions

and in anappropriate way suitable for thetype of power tool used. Alsotake

into consideration your work environment and thetype of work to be done.

Usingthepower tool for apurpose other than that for which it is intended could

result in adangerous situation.

Proper use and maintenance of rechargeable power tools

a) Make sure that thepower switch is set to OFF before attaching thebattery.

Attaching abattery to apower tool when thepower switch set to ON is inviting

anaccident.

b) Only charge thebattery using acharger approved by themanufacturer.

Achargersuitable for one type of battery can pose aﬁre hazard if used for

anothertype ofbattery.

c) Only use thecordless power tool with batteries that are intended for that purpose.

Theuse of other types of batteries might cause damage orﬁre.

d) When thebattery is not in use, store it at asafe distance away from metal

objects such as paper clips, coins, keys, screws and other small metal

objects that can bridge thegap between thebattery terminals. Shortcircuiting

thebattery terminals can cause burn injuries orﬁres.

e) Mistreating thebattery may cause it to leak acid. Contact with this acid

should be avoided. Rinsewith water if you accidentally come into contact

with it. Consult adoctor if theacid comes into contact with your eyes. Battery

acid can cause irritation andburns.

Service

a) Repairs and service should only be performed by qualiﬁed tradesmen, and

only with original spareparts. This guarantees that thepower tool is safely

maintained.

Safety Warnings for Screwdrivers

Hold power tool by insulated gripping surfaces, when performing anoperation

where thefastener may contact hidden wiring. Fasteners contacting a “live” wire

may make exposed metal parts of thepower tool “live” and could give theoperator

anelectricshock.

ENGLISH

6 7

Additional safety instructions for chargers and batteries

• Never charge thescrewdriver using adifferent charger than theone supplied withit.

• Never use thecharger for charging anything other than thescrewdriver it was

supplied with.

• Do not expose thescrewdriver to direct sunlight, ﬂames or other heat sources

which might cause thescrewdriver to explode.

• Do not expose thescrewdriver or its charger towater.

• Do not dismantle thescrewdriver as this may lead to short-circuiting and pose

anexplosion risk.

Description

1. Magnetic screwdriver bits holder

2. LED worklight

3. Battery charge indicator lamp

4. [►] [ ◄] Forward/lock/reverse selector

switch

5. On/off trigger switch

6. Charging socket

7. Wallmounted holder with integrated bits

storage (10bitsincluded)

ENGLISH

Charging

Note: Thebattery is only partially charged when sold and must therefore be charged

before using it for theﬁrsttime. Thebattery should be charged for at least 5 hours

theﬁrst time it isused.

1. Makesure that theselector (4) is in themiddle setting.

2. Carefully slide thescrewdriver’s handle backwards onto theholder’s charge pin

until it is securely inserted.

3. Plugthemains charger into awall socket.

4. Theindicator lamp (3) comes on when thebattery is charging and goes off when

thebattery is fully charged.

• Normal charging takes about 5hours.

• For optimal performance: Donot allow thebattery remain fully discharged for

longer time periods.

• Afully charged lithium-Ion battery will keep its charge for up to six months if it is

notused.

• Do not use thescrewdriver when it is connected to thecharger.

• Only use thecharger supplied.

• Do not leave thecharger connected to thepower point after thescrewdriver has

been charged.

• Do not charge thebattery if theambient temperature is below 5 ºC or over 40ºC.

• Thebattery does not need to be completely discharged before charging.

• Thecharger is for indoor useonly.

• During long periods of storage thebattery should be charged every 6 months.

Operating instructions

1. Thewall-mounted holder has abits storage holder on itsside.

2. Selecttheproper bit and insert it into thescrewdriver’s bit spindle (1).

3. Selecttherotation direction using the3-setting selector switch (4):

- Reverse: Presstheselector switch in on theleft-handside.

- Trigger lock, selector in middle position.

- Forward: Presstheselector switch in on theright-handside.

4. Pullthetrigger (5) to start thescrewdriver and release it to stop thescrewdriver.

Thescrewdriver has two front-facing LED worklights, which automatically light

when thetrigger is squeezed and go off 5–10 seconds after thetrigger is released.

• Thescrewdriver has anautomatic spindle lock, which allows you to use it as

amanual screwdriver if thebatteries have been discharged or themachine is too

underpowered to complete thejob. Thespindle lock is activated as soon as you

begin screwing thescrewdriver manually. Max allowable torque 10 Nm.

• Do not overload thespindle lock.

• Do not squeeze thetrigger (5) with thespindle lock activated.

ENGLISH

Care and maintenance

• Clean theproduct when needed using asoft, lightly moistened cloth with some

washing up liquid.

• Never use solvents or strong detergents.

Responsible disposal

This symbol indicates that this product should not be disposed of with

general household waste. This applies throughout theentire EU. In order

to prevent any harm to theenvironment or health hazards caused by

incorrect waste disposal, theproduct must be handed in for recycling

so that thematerial can be disposed of in aresponsible manner. When

recycling your product, take it to your local collection facility or contact

theplace of purchase. They will ensure that theproduct is disposed of

in anenvironmentally sound manner.

Specications

Battery 3.6 V/1.5 Ah, lithium-ion

Screwdriver bit spindle Magnetic ¼″

Charging time Approx4–6hours

No-load speed 200rpm

Torque Max4.5Nm

Weight 0.37kg

Noise level LwA: 67.6 dB(A), uncertainty KwA: 3dB(A)

LpA: 56.6 dB(A), uncertainty KpA: 3dB(A)

Vibration ah: 0.387 m/s², uncertainty K: 1.5 m/s²

Charger Primary 230 V, 50 Hz

Secondary 6 V DC, 300mA

SVENSKA

Skruvdragare 3,6 V

Art.nr 18-3556 Modell DPL-118

40-8763 DPL-118

Läs igenom hela bruksanvisningen före användning och spara den sedan för fram-

tida bruk. Vireserverar oss för ev. text- och bildfel samt ändringar av tekniska data.

Vidtekniska problem eller andra frågor, kontakta vår kundtjänst (se adressuppgifter

påbaksidan).

Säkerhet

Generella säkerhetsinstruktioner för laddningsbara handverktyg

Varning! Läsalla instruktioner. Omnedanstående instruktioner inte följs kan detta

leda till elektrisk stöt, brand och/eller allvarlig skada. Termen”elektriskt handverktyg”

ivarningstexten nedan refererar till ditt nätanslutna eller batteridrivna handverktyg.

SPARA DESSA INSTRUKTIONER.

Arbetsutrymmet

a) Håll arbetsutrymmet rent och väl upplyst. Belamrade och mörka utrymmen

inbjuder till olyckor.

b) Använd inte elektriska handverktyg iexplosiva miljöer, som inärheten av lätt-

antändliga vätskor, gaser eller damm. Elektriska handverktyg genererar gnistor

som kan antända damm ellerångor.

c) Håll undan barn och åskådare medan du använder det elektriska handverktyget.

Störningsmoment kan göra att du förlorar kontrollen över handverktyget.

Elektrisk säkerhet

a) Det elektriska handverktygets stickpropp måste passa ivägguttaget. Modiﬁera

aldrig stickproppen på något vis. Användaldrig adapter tillsammans med

jordade elektriska handverktyg. Omodiﬁerade stickproppar och passande

vägguttag minskar risken för elektrisk stöt.

b) Undvik kroppskontakt med jordade föremål, som rör, element, köksspis

eller kylskåp. Detinnebär ökad risk för elektrisk stöt om din kropp är jordad.

c) Utsätt inte det elektriska handverktyget för regn eller våta förhållanden.

Omvatten tränger in iett elektriskt handverktyg ökar det risken för elektrisk stöt.

d) Misshandla inte nätsladden. Användaldrig nätsladden för att bära handverk-

tyget eller för att dra eller rycka stickproppen ur vägguttaget. Hållnätsladden

undan från värme, olja, vassa kanter och rörliga delar. Skadade eller trassliga

nätsladdar ökar risken för elektrisk stöt.

SVENSKA

e) När du använder ettelektriskt handverktyg utomhus, använd enskarvsladd

anpassad för detta ändamål. Användning av enskarvsladd för utomhusbruk

minskar risken för elektrisk stöt.

f) Om du måste använda ettelektriskt handverktyg på enfuktig plats, anslut

verktyget till elnätet via enjordfelsbrytare. Användning av jordfelsbrytare minskar

risken för elektrisk stöt.

Personlig säkerhet

a) Var uppmärksam på vad du gör och använd sunt förnuft när du använder

ettelektriskt handverktyg. Användinte ettelektriskt handverktyg om du är trött

eller påverkad av droger, alkohol eller medicinering. Ettögonblicks ouppmärksamhet

när du använder ettelektriskt handverktyg kan resultera iallvarlig personskada.

b) Använd skyddsutrustning. Bäralltid skyddsglasögon. Användning av skydds-

utrustning som andningsskydd, halksäkra skyddsskor, hjälm och hörselskydd vid

behov minskar risken för personskada.

c) Undvik oavsiktlig start. Setill att strömbrytaren är iavstängt läge innan du

ansluter stickproppen till vägguttaget. Attbära ettelektriskt handverktyg med

ettﬁnger på strömbrytaren/avtryckaren eller att ansluta ettelektriskt handverktyg

till elnätet när strömbrytaren är ipåslaget läge inbjuder till olyckor.

d) Ta bort alla serviceverktyg/nycklar innan du slår på det elektriska hand-

verktyget. Ettkvarglömt serviceverktyg på enroterande del av det elektriska

handverktyget kan resultera ipersonskada.

e) Sträck dig inte för långt. Setill att du står stadigt med god balans hela tiden.

Dettamöjliggör bättre kontroll ioväntade situationer.

f) Bär lämplig klädsel. Bärinte löst sittande kläder eller smycken. Hållhår, kläder

och handskar undan från rörliga delar. Lösakläder, smycken eller långt hår kan

fastna irörliga delar.

g) Om utrustning för utsugning och uppsamling av damm ﬁnns tillgänglig, se till

att denna är ansluten och används ordentligt. Användning av dessa hjälpmedel

kan minska dammrelaterade faror.

Användning och underhåll av elektriska handverktyg

a) Pressa inte det elektriska handverktyget. Användettelektriskt handverktyg

som är avsett för det arbetsmoment du utför. Korrekt elektriskt handverktyg gör

jobbet bättre och säkrare med avsedd matningshastighet.

b) Använd inte det elektriska handverktyget om strömbrytaren inte slår på och

stänger av verktyget. Allaelektriska handverktyg som inte kan kontrolleras med

strömbrytaren är farliga och måste repareras.

c) Ta stickproppen ur vägguttaget innan du utför några justeringar, byter tillbehör

eller lägger undan det elektriska handverktyget för förvaring. Dessaåtgärder iföre-

byggande syfte minskar risken för att starta det elektriska handverktyget oavsiktligt.

d) Förvara elektriska handverktyg som inte används utom räckhåll för barn och

låt inte personer som inte är förtrogna med det elektriska handverktyget eller

dessa instruktioner använda det. Elektriska handverktyg är farliga om de kommer

ihänderna på ovana användare.

Indice

Lingue:

Altri manuali Cocraft Cacciavite elettrico

Cocraft

Cocraft HSS 3.6-LI Manuale utente

Manuali Cacciavite elettrico popolari di altre marche

Makita

Makita DFT085F Manuale utente

Parkside

Parkside 345138 2004 Manuale utente

Makita

Makita DFL650F Manuale utente

AEG

AEG BST 18BLX2-0 Manuale utente

Ingersoll-Rand

Ingersoll-Rand D5000 Series Manuale utente

BGS technic

BGS technic 956 Manuale utente

Hilti

Hilti SD 6000 Manuale utente

Parkside

Parkside PEPS 3 A1 Manuale utente

Festool

Festool TI 15 Manuale utente

Makita

Makita DWT190 Manuale utente

Matatakitoyo Torque Tools

Matatakitoyo Torque Tools MTD Manuale utente

Skil

Skil 2346 Istruzioni per il montaggio

DeWalt

DeWalt XR LI-ION DCD931 Manuale utente

Festool

Festool DWC 18-2500 Manuale utente

EINHELL

EINHELL TE-CD 12/1 Li Series Manuale utente

Makita

Makita BFT043F Manuale utente

Stanley

Stanley SCD2 Manuale utente

Atlas Copco

Atlas Copco LUM12 SR Foglio di istruzioni