Code Blue CB 1-s w Manuale di servizio

800.205.7186 •www.codeblue.com
Administrator Guide
Public Address System
PAS
Installation | Configuration | Operation | Troubleshooting

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 2 of 26
Public Address System
Administrator Guide
WARNING
ONLY QUALIFIED PERSONNEL SHOULD INSTALL THESE UNITS. THE INSTALLATION
SHOULD CONFORM TO ALL LOCAL CODES. IN SOME COUNTRIES, A CERTIFIED ELECTRI-
CIAN MAY BE REQUIRED.
CAUTION
No caution is necessary for this product.
NOTICE TO USERS
Copyright © Code Blue Corporation. All rights reserved. This guide or software described herein, in
whole or part, shall not be reproduced, translated or reduced to any machine-readable form without
prior written approval from Code Blue Corporation.
CODE BLUE CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS GUIDE, THE
SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DIS-
CLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICU-
LAR PURPOSE WITH REGARD TO THIS GUIDE, THE SOFTWARE OR SUCH OTHER INFORMA-
TION. IN NO EVENT SHALL CODE BLUE CORPORATION BE LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL, OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR
OTHERWISE, ARISING OUT OF OR IN CONNECTIONS WITH THIS GUIDE, THE SOFTWARE
OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF.
Code Blue Corporation reserves the right to make any modications to this guide or the information
contained herein at any time without notice. The software described herein may also be governed
by the terms of a separate user license agreement.
Code Blue®is a registered trademark of Code Blue Corporation.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 3 of 26
Public Address System
Administrator Guide
Table of Contents
Section Page
2 Introduction.................................................................................... 4
3 Before You Start...............................................................................6
4 How to Update Connectors.............................................................7
5 Installation & System Setup.......................................................... 9
6 Software Conguration..................................................................17
7 Architectural Overview...................................................................18
8 Wiring Diagrams..............................................................................19
9 Troubleshooting..............................................................................24
10 Spare Parts......................................................................................25
11 Download Information.....................................................................26

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 4 of 26
Public Address System
Administrator Guide
2 Introduction
Thank you for choosing the Public Address option for your Code Blue application. Public Address is
a centralized amplier-based system designed to provide voice paging and broadcast alarm tones
during emergencies. The system can transmit alarm tones and voice messages in a reliable and
safe manner from a central location to all or selected areas of the facility via loudspeakers. The en-
tire operational area can be divided into one or more zones, which can be accessed independently
either for announcements or alarm broadcasting. Loudspeakers are installed in these zones. There
are no limitations to the number of zones in a system or number of loudspeakers in each zone. The
system is designed to oer clear reproduction of sound and intelligibility, even in high noise areas.
2.1 Overview
This manual contains all of the Code Blue PAS information needed on the CB 1 series with Public
Address, CB 5-s with Public Address, WM-180 Public Address System, CB 2-e with Public Address
and 360° PAS retrot top. This manual contains a general overview of the Code Blue PAS options
and its application, installation and wiring.
CB 5-s w/ PAS WM 180° CB 2-e w/ Public Address 360° PAS Retrot TopCB 1-s w/ PAS

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 5 of 26
Public Address System
Administrator Guide
2.2 PAS Options:
2.2.1 CB 1 Series with Public Address Units – Outdoor
• Large diameter towers; analog or IP
• An excellent choice when instant mass notication of a geographic area is essential.
The unique six-speaker design delivers optimal audio source dispersion utilizing state-
of-the-art ampliers and horn array.
2.2.2 CB 5-s with Public Address Units – Outdoor
• Small diameter towers
• Exclusively designed as an emergency communication system to deliver maximum
audio clarity and range to ensure notications are accurately broadcast to your intended
audience.
2.2.3 CB 2-e with Public Address Units – Indoor & Outdoor
• Wall or pole mount; analog or IP
• An excellent choice for parking decks, dorm entrances, hallways and public transit cen-
ters where instant mass notication of a geographic area is essential.
2.2.4 360 ° PAS Retrot Tops – Outdoor
• PAS top kit for existing standard CB 1 series towers in the eld to provide public ad-
dress capabilities.
• The unique six-speaker design delivers optimal audio source dispersion utilizing state-
of-the-art ampliers and horn array.
2.2.5 WM-180 Wall Mount PAS unit – Indoor & Outdoor
• Wall or pole mount option remotely adds public address capabilities to new or existing
CB units.
• By adding an analog or IP controller board, you enable the WM-180 to be directly man-
aged by Code Blue’s Blue Alert® MNS (Mass Notication System) soft¬ware, granting
the user messaging options. The controller also monitors the amplier and speaker for
various failures, which are reported to the appropriate maintenance personnel, and al-
lows the user to call a single WM-180 unit for a targeted message.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 6 of 26
Public Address System
Administrator Guide
3 Before You Start
3.1 NFPA 72 Chapter 24
This regulation covers the application, installation, location, performance, inspection,
testing and maintenance of fire alarm systems, supervising station alarm systems, public
emergency alarm reporting systems, fire warning equipment and emergency communi-
cations systems (ECS), and their components.
3.2 UFC-4-021-1
This provides technical criteria for systems that implement mass notification in compli-
ance with the Department of Defense’s antiterrorism requirements. Implement national
design standards and recommendations for mass notification systems, as provided in
NFPA 72, including Annex E.
3.3 Precautions
Code Blue recommends professional services before the order and installation of all PAS
products.
For survey information, please email customerservice@codeblue.com.
3.3.1 PAS Site Survey – call for scheduling and pricing
• Ambient Noise Survey: Measures the sound energy flowing into, or outward
from, a specified area.
• System Design Survey – Involves the placement, wiring and installation of PAS
equipment.
• Complete Survey – Includes ambient noise and system design of PAS equip-
ment.
3.4 In Case of Breakdown
Code Blue Technical Support
Email: tss@codeblue.com
Toll free: 800-205-7186, Opt. 3
3.5 In Case of Abnormal Operation
If the unit emits smoke or an unusual smell, water or other foreign materials enter the en-
closure, or the unit is dropped or the enclosure is damaged, power o immediately and
contact Code Blue Customer Service.
Email: customerservice@codeblue.com
Toll free: 800-205-7186, Opt. 2

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 7 of 26
Public Address System
Administrator Guide
4 How to Update Connectors
As of 2020, many Code Blue products come with Wago connectors. These connectors provide
ease of use and a much stronger connection. Below are the steps needed to change to the new
connectors.
Example:
Cut o both wires.
Strip all wires and twist tight.
Wago socket
connectors to
add to your wires.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 8 of 26
Public Address System
Administrator Guide
Place small screwdriver into square hole and push down. Insert cut wire into
round hole and remove screwdriver. Repeat on the rest of the connectors.
Once all connectors have been switched, you are ready to apply power to the
LED.

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 9 of 26
Public Address System
Administrator Guide
5 Installation & System Setup
This section covers the following units:
• CB 1 Series with Public Address, including the 360° PAS Retrofit Kit
• CB 5-s with Public Address
• CB 2-e with Public Address
• WM-180°
5.1 CB 1 Series with Public Address, including 360° PAS Retrot Kit
The following models are covered in the installation instructions for CB 1 Series with
Public Address or the 360° PAS Retrofit Kit:
• CB 1-e
• CB 1-s
5.1.1 Tools Required
• Ladder – to reach the top of the unit.
• Security bit – to secure the PAS top to the adapter ring.
• 6mm Allen wrench – to secure the PAS adapter ring to the top of the unit.
• 3/8” socket set - to mount the mounting plate containing the new toroid
transformer.
5.1.2 Before You Begin
• Remove 120V AC power from the unit.
5.1.3 Install Adapter Ring
5.1.3.1 Remove the existing dome top assembly. Disconnect the red/black and
yellow/yellow wiring harnesses connected to the beacon/strobe mount-
ed in the dome top assembly.
5.1.3.2 Place the adapter ring on top of the bollard and tighten the three Allen
set screws to hold in place (see Figure 2 on Page 12).
5.1.4 Transformer Installation
Install new toroid transformer.
NOTE: Skip this section if you ordered a CB 1 Series with Public Address
as a complete unit.
5.1.4.1 Remove lower access door on the CB 1 bollard.
5.1.4.2 Remove the existing 120V AC step down transformer.
5.1.4.3 Install toroid transformer with mounting plate using supplied hardware
(see Figure 1 on Page 10).
5.1.4.4 Connect incoming 120V AC wiring to the transformer using the junc-
tion box on mounting plate. Refer to included wiring diagram for wiring

Code Blue •259 Hedcor Street •Holland, MI 49423 USA •800.205.7186 •www.codeblue.com GU-153-Hpage 10 of 26
Public Address System
Administrator Guide
terminations (See Figure 5 on Page 18).
5.1.4.5 Run the supplied amplifier wiring harness, beacon/strobe power har-
ness (red/black), beacon/strobe auxiliary harness (yellow/yellow), 7 pin
control cable and RJ-11 audio cable to the top of the bollard. Connect
the molded quick connector on the red/black harness to the manifold
connector on the transformer. Connect the yellow/yellow harness, 7 pin
control cable and RJ-11 to the phone board. Connect the large white
connector of the amplifier wiring harness to the wiring connector on the
transformer. Refer to the included wiring diagram for wiring termina-
tions (See Figure 1 below).
5.1.5 Install 360° PAS Speaker Unit
5.1.5.1 Connect the red/black and yellow/yellow wiring harnesses to the red/
black and yellow/yellow wiring pigtails coming from the beacon/strobe.
5.1.5.2 Connect the 6 pin wiring harness, 7 pin control cable and RJ-11 audio
cable to the ports on the amplifier.
5.1.5.3 Set the PAS speaker unit on the adapter ring, lining up the screw holes
at the bottom of the unit. Secure the speaker unit with the provided
security screws.
5.1.5.4 Reapply power to the unit.
Figure 1
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Code Blue Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche

EDM
EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group
Highway Safety Group EA401 Manuale utente

Siren
Siren LED GSM Manuale utente

Detection Systems
Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens
Siemens FDM273 Manuale utente












