Codent APOLLO Series Guida
1
Low Speed Handpiece and Air Motor (APOLLO SERIES)
Operation manual &Maintenance Guide
ENGLISH 繁 體
CODENT TECHNICAL INDUSTRY CO., LTD.
QS-B0-012
0197
02
CAUTION
˙Please consider the safety of the patient when using the handpiece.
˙Please remember when the bur is rotating, pressing the chuck push button that will result in
overheating of the handpiece. When pressing the chuck push button, please keep the handpiece away
from the face of the patient.
˙Please use carefully and do not drop the handpiece.
˙Never try to take the handpiece apart or tamper with mechanism.
˙If the handpiece operate irregular, stop using immediately and give back to your dealer for service.
˙When you want to remove the bur, please wait to the handpiece completely stop rotating.
˙Please use burs no longer than 26mm. Do not use no-dental burs.
˙Please look over the overheating, vibration and noise outside the patient’s mouth. If you nd any unusual
situation, please contact with the dealer for service.
Thank you for purchasing Codent Low Speed Handpiece and Air Motor.
0197
03
Contents
1. Performance Specications......................................................................................................................04
Low Speed Contra-angle Handpiece
Low Speed Straight Handpiece
Air Motor
2. Insert & Remove the bur for Contra Cngles Handpiece................................................................09
3. Insert & Remove the bur for Straight Handpiece.............................................................................10
4. Connect to Air Motor and Disconnect from Air motor.....................................................................11
5. Lubricate...........................................................................................................................................................12
6. Clean and Sterilize.........................................................................................................................................14
04
1. Performance Specications
※ Low Speed Contra-angle Handpiece
Model A65 L A65 A55 L A55 A85 L A85 A61 L A61 A51
Colling Systen Quattro Single Quattro Quattro
Chuck Type Push Type
Gear Ratio 1:5 1:4.2 1:1
Allowable Max.
Speed (rpm) 200,000 168,000 40,000
Bur Size Size: ISO1797-1 Type 3
Ø1.59-1.60mm
Ø2.35mm Latch Type Burs,
Surgical Drill / TAP
Fiber Optics ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Head type Standard Miniature 45° Standard Miniature
05
※ Low Speed Contra-angle Handpiece
Model A64 L A64 A54 A10 L A10 A16 L A16 A56 A20 L A20
Colling Systen Single Spray / Internal Cooling External / Internal
Chuck Type Push Type
Gear Ratio 4:1 10:1 16:1 20:1
Allowable Max.
Speed (rpm) 10,000 4,000 2,500 2,000
Speed (rpm) Ø2.35mm Latch Type Burs,Surgical Drill / TAP
Fiber Optics ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐ ‐‐‐
Head type Standard Miniature Standard Standard Miniature Standard
06
※ Low Speed Contra-angle Handpiece
Model H61 H51 H64 H54 H16 H56 H41 H31
Colling Systen Single Spray / Internal Cooling Single Spray /
External Cooling
Chuck Type Push Type
Gear Ratio 1:1 4:1 16:1 1:1
Allowable Max.
Speed (rpm) 40,000 10,000 2,500 40,000
Bur Size Ø2.35mm Latch Type Burs,Surgical Drill / TAP
Fiber Optics ‐‐‐
Head type Standard Miniature Standard Miniature Standard Miniature Standard Miniature
07
※ Low Speed Straight Handpiece
Model
A11 L A11 A12 H10 H11 H12
Internal Straight Handpiece External Straight Handpiece
Colling Systen Single Spray / Internal Cooling Single Spray / External Cooling
Chuck Type Switch to disconnect
Gear Ratio 1:1
Allowable Max.
Speed (rpm) 40,000
Bur Size Ø2.35mm Latch Type Burs,Surgical Drill / TAP
Fiber Optics ‐‐‐
08
※ Air Motor
Model
AI6N W AI6N AI4N W AI4N AE4N AE4F AE2N AE2F
Internal Air Motor External Air Motor
Allowable Max.
Speed (rpm) 25,000
Speed regulation Reverse rotaction
Adjustable Water
Volume ‐‐‐ ‐‐‐ ‐‐‐
09
2. Insert & Remove the bur for Contra Cngles Handpiece
To insert the bur (FIG. 1)
Please press the push button and insert the bur into the spindle. Make sure it is secure and then, you
could release the button.
To remove the bur (FIG. 2)
Please make sure the handpiece is completely stopped rotating and then press the push button securely
and remove the bur.
FIG.1 FIG.2
CAUTION
You can pull and push the bur without press the push button for testing the bur is secure.
10
3. Insert & Remove the bur for Straight Handpiece
To insert the bur (FIG. 3)
Please switch the Tension ring to counter clockwise direction till t the sound of “click” and then insert bur
into the spindle. Make sure you hear the sound of “click”.
To remove the bur (FIG. 4)
Please switch the Tension Ring to the counter clockwise direction till the sound of “click” and then pull out
the bur.
FIG.4
FIG.3
CAUTION
You can pull and push the bur for testing the burr is secure.
Altri manuali per APOLLO Series
1
Questo manuale è adatto per i seguenti modelli
41
Indice
Altri manuali Codent Attrezzature odontoiatriche
