Cogent Systems Mobile Ident II Manuale utente

MobileIdentTMII 2008

Cogent Systems

Instruction of Mobile IdentTM II

MobileIdentTMII 2008

Table of Content

1. Power On………………………………………………………………...…………………..3

2. Login the Mobile Ident II (MI2)………………………………………………...………….3

3. Home Page………………………………………………………………...………………..4

4. Settings………………………………………………………………………………………..4

4.1.Volume…………………………………….…………………………………………….5

4.2.Date………………………………...…………………………………………………….5

4.3.Users………………………………………………………………………………………6

5. Wireless……………………………………...………………………………………………..6

6. Identify…………………………………….………………………………………………….7

6.1.Search………………………...………………………………………………………….7

6.2.Enroll………………………………………………………………………………………8

6.2.1.Demographics……..……………………………………………………………8

6.2.2.Fingerprints………………………………………………………………………..8

6.2.3.Photo………………………………………...…………………………………….9

6.2.4.Database………………………………...……………………………………….9

MobileIdentTMII 2008

1. Power On

To turn on and shut down the device, press power button for 2-3 seconds

(Figure 1).

Power

button

Figure 1

2. Login the Mobile IdentTM II

In order to access the systems, you have to get a valid user name and

password. Enter your user name and password and then tap ‘Login’, as Figure

2 shown below. Administrators create user accounts using ‘Users’. For details,

please refer to 4 ‘Users’.

Figure2

Caps

Lock

MobileIdentTMII 2008

3. Home Page

After login, you will get into the main page of MI2 as Figure 3 shown below. All

function of Mobile IdentTM II will display in this page. Tap the icon (function) you

wish to operate.

Figure 3

4. Settings

Select and enter ‘Settings’, you can set the data be yourself (Figure 4).

Figure 4

MobileIdentTMII 2008

4.1.Volume

Tap ‘Save’ to save your setting (Figure 5).

Figure 5

4.2.Date

Set the time, date and time zone, then tap save (Figure 6).

Figure 6

MobileIdentTMII 2008

4.3.Users

Tap ‘New’ to add user. Enter the information in the page, then tap save to

save your setting (Figure 7).

Figure7

5. Wireless

Select ‘Wireless’ and get into the power control. Tap the On-Off button to

control the wireless function (Figure 8). Please note that GPRS, WIFI and

BLUETHOOTH cannot work together. It is impossible to send data with all

systems at the same time and it cannot send data during the scan process.

Figure 8

MobileIdentTMII 2008

6. Identify

‘Identify’ is the main function of MI2. It is use to enroll fingerprint, edit and

search the demographics (Figure 9).

Figure 9

6.1.Search

‘Search’ is for searching the data in the database. You can search by

finger and facial (Figure 10). If it finds a match in the database, the

information will be displayed.

Figure 10

MobileIdentTMII 2008

6.2.Enroll

6.2.1.Demographics

Tap ‘Enroll’ and get into the demographics. Tap the information you

wish to enter and edit it. After editing demographics, tap ‘OK’ go to

the nest step (Figure 11).

Figure 11

6.2.2.Fingerprints

Tenprints is required. Follow the instruction to enroll tenprints (from R

Thumb to L Little) (Figure 12). Select the finger you wish to enroll. If

the quality of fingerprint is poor, the system will ask for capture

again. If the quality of the image is good, then it will go to capture

the next finger.

Figure12

MobileIdentTMII 2008

6.2.3.Photo

After capturing the fingerprint, it will go to the next step ‘Photo’

automatically. It will take 5 photos for 5 different face angles. One

photo captured at front, two captured at 90 degree (left and right),

two captured at 45 degree (left and right) (Figure 13).

Figure 13

6.3.Database

Check the data you entered (Figure 14). You can edit the information you

entered previously.

Figure 14

MobileIdentTMII 2008

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. End users must follow the specific operating instructions

for satisfying RF exposure compliance. This transmitter must not be co-located or

operating in conjunction with any other antenna or transmitter.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

Indice

Altri manuali Cogent Systems Scanner

Cogent Systems

Cogent Systems BlueCheck Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente