Table of Figures
Fig. 1: Safety instructions on the underside of the e-mark create..............................................................................15
Fig. 2: Package content..............................................................................................................................................16
Fig. 3: e-mark create parts..........................................................................................................................................17
Fig. 4: Marking device assembly underside ...............................................................................................................18
Fig. 5: Docking station assembly top section and underside .....................................................................................19
Fig. 6: Packaging........................................................................................................................................................22
Fig. 7: Opening and removing the cover ....................................................................................................................23
Fig. 8: Opening the battery compartment and remove battery...................................................................................23
Fig. 9: Battery contact insulating tape ........................................................................................................................24
Fig. 10: Opening the sliding panel..............................................................................................................................24
Fig. 11: Ink cartridge...................................................................................................................................................25
Fig. 12: Insert ink cartridge.........................................................................................................................................25
Fig. 13: Close lower flap cover ...................................................................................................................................25
Fig. 14: Insert battery..................................................................................................................................................26
Fig. 15: Example test imprint with SSID and password..............................................................................................27
Fig. 16: On/off switch..................................................................................................................................................29
Fig. 17: Remove e-mark create from the docking station...........................................................................................30
Fig. 18: Printing from left to right ................................................................................................................................30
Fig. 19: Printing from right to left ................................................................................................................................30
Fig. 20: Multi-line imprint procedure ...........................................................................................................................31
Fig. 21: Place into docking station..............................................................................................................................31
Fig. 22: Light Guide ....................................................................................................................................................33
Fig. 23: Light Guide directions....................................................................................................................................33
Fig. 24: Colour sample released by automatic print head cleaning ...........................................................................37
Fig. 25: Do not direct towards eyes, face or skin. Light irritation possible .................................................................37
Fig. 26: Slide out print head wiper..............................................................................................................................38
Fig. 27: Clean print head with wiper ...........................................................................................................................38
Fig. 28: Clean print head with damp cloth ..................................................................................................................39
Fig. 29: Software wizard –Welcome page.................................................................................................................40
Fig. 30: Software wizard –WIFI information...............................................................................................................40
Fig. 31: Software wizard –Connection to e-mark create ...........................................................................................41
Fig. 32: Software wizard –Test imprint......................................................................................................................41
Fig. 33: “My Imprints” page.........................................................................................................................................42
Fig. 34: e-mark connect page.....................................................................................................................................42
Fig. 35: Example image of WIFI connection in the settings of the mobile device ......................................................43
Fig. 36: USB connection.............................................................................................................................................44
Fig. 37: Power plug.....................................................................................................................................................45
Fig. 38: Charge battery...............................................................................................................................................46
Fig. 39: Open and remove cover................................................................................................................................48
Fig. 40: Battery ...........................................................................................................................................................48
Fig. 41: Open battery compartment............................................................................................................................48
Fig. 42: Opening the sliding panel..............................................................................................................................49
Fig. 43: Sliding panel open.........................................................................................................................................49
Fig. 44: Pull out ink cartridge......................................................................................................................................50
Fig. 45: Ink cartridge...................................................................................................................................................50
Fig. 46: Insert ink cartridge.........................................................................................................................................50
Fig. 47: Close lower flap cover ...................................................................................................................................51
