ASSEMBLY INSTRUCTIONS MADE IN CHINA
MODEL #:W-3175-90KHZ
6. Then plug the adaptor into the wall outlet finally. Your entire tree should now be lit. If some bulbs
do not light or flicker, search for any loose plugs and/or broken, loose or missing bulbs.
Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree.
STORAGE INSTRUCTIONS
1. Remove all ornaments and decorations. For pre-lit trees, first unplug the adaptor from the wall
outlet.
2. Gather the branches upwards and secure them in place. Then disassemble the tree from the top to the
upper sections. Gently lift off the 3 sections and place them into box.
3TUnscrew the tree stand, lift off the bottom section and put into box. hen disassemble the tree stand
and pack into box and tape it shut.
4. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree
to excessive heat or humidity may damage your tree.
TROUBLE SHOOTING TIPS
For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected as shown in Fig.B and the power cord is
plugged into the wall outlet. Refer to assembly guide for instructions.
2. Please check for loose, broken or missing light bulbs and replace as needed.
SPARE PARTS
For pre-lit trees spare bulbs are included. If extra parts are needed, please contact our customer service
center.
HOW TO USE REMOTE CONTROL:
Remote Control Front Remote Control Back
1: Remote Control Operating Range: 16 ft
2: Remote Control Functions:
Button A: ON/OFF
Button B: COLOR
Button C: MODE
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLOR SWITCHING
1.STEADY ON
2.SLOW SPARKLING
3.QUICK SPARKLING
4.SLOW FADE
5.QUICK FADE
6.SLOW GLOW
7.FLASHING
8.COLORSWIT CHING 3.Remote Control includes 1 piece 23A battery packed
separately with instruction manual.
WARNING
1. Use only power adaptor supplied with this product, using a different adaptor will damage the lights
and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.
Tree ID#: Customer Name:
Tree UPC#: Address: (No P.O. Boxes)
Store Purchased: City& State:
Specify Problem: Zip Code:
Day Phone:
Date Purchased:
CUSTOMER SERVICE FOR CHRISTMAS TREES
For any questions, assistance, or missing parts, please contact us at 1-844 946 8733
Or visit our website at
www.winnerstree.com.
Welcome to email us: CUSTOMERSERVICE@WINNERSARTS.COM
TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS RE
UIRED WHEN RE
UESTING REPLACEMENT PARTS.
Do Not Return This Product To The Store.
ON/OFF
COLOR
MODE -23A+
