Colormetrics P1300 Manuale utente

www.colormetrics.info Colormetrics P1300

Errors excepted; subject to change www.colormetrics.info

P1300

User Manual

Version 1.0

2www.colormetrics.infoColormetrics P1300

This manual, software and rmware described in it are copyrighted by their respective owners and

protected under the laws of the Universal Copyright Convention. You may not reproduce, transmit,

transcribe, store in a retrieval system, or translate into any language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, biological, molecular,m manual, or otherwise,

any part of this publication without the express written permission of the publisher.

All products and trade names described within are mentioned for identication purpose only. No

aliation with or endorsement of the manufacturer is made or implied. Product names and brands

appearing in this manual are registered trademarks of their respective companies.

The information published herein has been checked for accuracy as of publishing time. Norepre-

sentation or warranties regarding the tness of this document for any use are made orimplied by the

publisher. We reserve the right to revise this document or make changes in the specications of the

product described therein at any time without notice and without obligation to notify any person of

such revision or change.

www.colormetrics.info Colormetrics P1300

SAFETY INSTRUCTIONS

1. Read these instructions carefully. Keep these instructions for future reference.

2. Please disconnect this device from AC outlet before cleaning. Do not use liquid or spray

detergent for cleaning. Use moisture sheet or cloth for cleaning.

3. Please keep your device safe from high levels of humidity.

4. Install the device and its driver on a surface plate. Any tilt plate might cause damage.

5. Do not place anything over the power cord. And avoid people from stepping on it

6. Please be aware cautious note or warnings on the device.

7. If the device will not be used for a long time, please unplug the power cord to avoid damages

by transient overvoltage.

8. Never pour any liquid into the device; this could cause re or electrical shock.

9. If one of the following situations happens, get the device checked by a service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the device.

c. The device has been exposed to moisture.

d. The device does not work well or you cannot get it work according to user manual.

e. The device has dropped and damaged.

10. Do not leave this device in an environment unconditioned, storage temperature below -20°C or

above 60°C, it may damage the device.

11. Unplug the power cord when doing any service or adding optional kits.

Lithium Battery Caution:

1. 1. Danger of explosion can happen if the battery is incorrectly replaced. Replace only the

original or equivalent type recommended by the manufacture. Dispose used batteries

according to the manufacture’s instructions.

2. Do not remove the cover, and ensure no user serviceable components are inside. Take the unit

to the service center for service and repair.

4www.colormetrics.infoColormetrics P1300

CE Notice

This device complies with the requirements of the CE directive.

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

Shielded interface cables must be used in order to comply with emission limits.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

WEEE Notice

This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste

electrical and electronic equipment (WEEE). The Directive determines the framework for the return

and recycling of used appliances as applicable throughout the European Union. This label is

applied to various products to indicate that the product is not to be thrown away, but rather

reclaimed upon end of life per this Directive.