Comelit 2738W Manuale utente
EN
TECHNICAL
MANUAL
Passion.Technology.Design.
Door-entry phone
Art. 2738W
Description....................................................................................... 3
Technical specifications ................................................................. 4
Installation........................................................................................ 5
Connections..................................................................................... 6
Connection to the video entry system riser...........................................6
Branched connection to the video entry system riser from the
internal video unit.....................................................................................6
Programming ................................................................................... 7
System performance and layouts .................................................. 7
Table of contents
Warning
2
Description
Article 2738W is a door-entry phone complete with 1 key button, 1 P1 button and a 3-position ringtone / Privacy service
selector. Can be used in “Building Kit” systems (exclusively 2-wire).
1. Loudspeaker
2. Audio hook
Do not press and hold the audio hook
while the handset is lifted
3. 3-position ringtone / Privacy selector:
High position: Maximum ringtone volume
Middle position: Medium ringtone volume
Low position: Privacy activation (Privacy service means
exclusion of the call ringtone from the external unit and
switchboard)
4. Red indicator signaling: Privacy service active
5. P1 button for switchboard call / Generic actuator
6. Key button
7. Terminal block M1:
CFP CFP floor door call input
LL BUS line connection
8. DIP-switch for setting user code (See “DIP-switch
programming table”).
9. Bell / Privacy selector
10. JP1 jumper for selecting the Generic actuator /
Switchboard call function of button P1
CSwitchboard
AGeneric Actuator
11. Handset connector
1.
5.
4.
6.
2.
3.
3
Technical specifications
MAIN SPECIFICATIONS
Audio system Yes
Audio/video system Yes
Wall-mounted Yes
Desk base-mounted Yes
Product colour White
Total buttons 2
LED signaling No
FUNCTIONS
Actuator control function Ye s
Switchboard call function Yes
Privacy function Yes
Floor door call function Yes
Electronic bell Yes
SETTINGS
Loudspeaker volume control Yes
Microphone volume control No
Ringtone volume control Ye s
GENERAL INFOI
Product height (mm) 190
Product width (mm) 103
Product depth (mm) 30
TECHNICAL SPECIFICATIONS
Power supply voltage 22÷35 Vdc
Power consumption stand-by (mA) 0,5÷0,710 Vdc
In called absorption (mA) 25÷30 mA
In communication absorption (mA) 23÷30 mA
Microphone Ø 9,6 x 6,9 mm
Loudspeaker Ø 0,50 mm ; Max Imput Power 0,5W
IP Rating 30
Operating temperature (°C) -5÷40
Product weight (g) 0,257 Kg
Clamps L,L,CFP,CFP
4
2
1
3
3
2
1
2
3
3
2
1
3D3C3B
S1
SW1
JP1
CFP
CFP
L
L
S1
SW1
JP1
CFP
CFP
L
L
max 7 cm
1
1CLACK!
2
CLACK!
1
1
1
1
2
654
2
2
1
cm 160
cm 130
1
2
2
3
3A21
mm 190
mm 105
7
Installation
5
Connections
2738W
1214/2C
VIDEO ENTRY
SYSTEM RISER
VIDEO ENTRY
SYSTEM RISER
P
F
C
LL
P
F
C
FLOOR DOOR CALL
LM
LM
OUT
L
IN
L
IN
L
OUT
L
20 m MAX - Use shielded cable for the connection and do not route the cables in the vicinity of heavy inductive loads
or power supply cables (230V/400V).
Where multiple door-entry phones or monitor backplates have the same user code, connect the CFP button on oneonly;
all the devices will ring simultaneously..
Connection to the video entry system riser
Branched connection to the video entry system riser from the internal video unit
L
OUT
L
IN
L
IN
L
OUT
1214/2C
1214/2C
1209 / 1210 /4888C
LM
LM
C
F
P
LL
C
F
P
12
6700W
6701W
6701B
L L
C
F
P
C
F
P
2738W
L L
C
F
P
C
F
P
2738W
LM
LM
OUT
L
IN
L
IN
L
OUT
L
123456
6721W
6721W
20 m MAX - Use shielded cable for the connection and do not route the cables in the vicinity of heavy inductive loads
or power supply cables (230V/400V).
Where multiple door-entry phones or monitor backplates have the same user code, connect the CFP button on one
only; all the devices will ring simultaneously..
6
Programming
• Each door-entry phone in the system is identified by means of its own code. This code must be set using the Dip switch on
the phone card.
• The user code must be set according to the corresponding information provided in the programming table.
• Coding can take place at any time, even without a power supply.
System performance and layouts
For further information of system performance and to view installation layouts, click on the type of system that best meets your
needs:
• Audio/video kit for the creation of audio-video systems for individual residences.
• Building Kit audio/video system for the creation of audio-video systems for small apartment blocks.
• SBTOP audio/video system for the creation of audio-video systems for residential complexes.
• SB2 audio system for the creation of audio systems for residential complexes.
7
www.comelitgroup.com
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
1st edition 07/2017
code. 2G40001933
CERTIFIED MANAGEMENT SYSTEMS
Indice
Altri manuali Comelit Sistema di interfono
Comelit
Comelit 4793MA Manuale utente
Comelit
Comelit KAE5061 Manuale del proprietario
Comelit
Comelit PAC GDX Series Manuale utente
Comelit
Comelit 8461I/BM Manuale utente
Comelit
Comelit Venice Manuale utente
Comelit
Comelit HUB32LCD Manuale utente
Comelit
Comelit KAE0061 Manuale utente
Comelit
Comelit Easycom ViP internal unit Manuale utente
Comelit
Comelit 1622 Manuale utente
Comelit
Comelit 8171I Manuale utente
Comelit
Comelit HFX-9000M Manuale utente
Comelit
Comelit HUB32LCD Manuale utente
Comelit
Comelit 8461V Manuale utente
Comelit
Comelit 1414 Manuale utente
Comelit
Comelit Magis 6402B Manuale utente
Comelit
Comelit 1622 Manuale utente
Comelit
Comelit 3311 Manuale utente
Comelit
Comelit Planux 8172IP Manuale utente
Comelit
Comelit VEDOKP Manuale utente
Comelit
Comelit 6302S Manuale utente
