Comica WM300 II Manuale utente
User Manual
UHF Wireless Microphone
96 x 2
534.125MHz ~ 557.875MHz
566.125MHz ~ 589.875MHz
10dBm / 15dBm
Channels
Group A Wireless Frequency
Group B Wireless Frequency
Transmitting Power
96 x 2
534.125MHz ~ 557.875MHz
566.125MHz ~ 589.875MHz
<-95dBm
Channels
Group A Wireless Frequency
Group B Wireless Frequency
Receiving Sensitivity
Foreword
Main Features
Thanks for purchasing COMICA WM300II UHF wireless microphone.
. Dual-channel Wireless Microphone
. 96 Channels for Multiple Devices Working Together
. Working Distance Up to 120m (Open Area)
. M/S Switch, Low Cut, Mute, 16 Levels Volume Adjustment
. Auto-scanning Channel and IR Sync
. Adjustable RF Signal Strength
. Built-in Rechargeable Lithium Battery, USB-C Charging Port
. Low-consumption, Super-long Standby Time
. Lattice LCD Screen for Intuitive Operation and Usage
. Full Metal Manufacturing, Excellent Shielding
Notice
Transmitter should be more than 20cm from Receiver, when the distance is less than
20cm, Receiver’s wireless signal receiving part will take protect action to shut down the
receiving of wireless signal, then audio may be intermittent, which is normal;
When using auto IR sync, please stay within one meter, otherwise the signal may be too
weak and the sync will not be successful;
The antenna will aect the working distance. Please protect the antenna and avoid any
man-made damage;
When using this product in a short distance, it is recommended to set RF strength at
‘LOW’ to reduce the power consumption;
For smartphone shooting, customers need to purchase a TRS-TRRS audio cable;
Do not expose the device in rain or humid environment, otherwise there will be a danger
of short circuit;
1
WM300(A) = 2TX + RX
WM300(C) = TX + RX
TX TX RX
++
TX RX
+
Package Contents
Main Parts：
Multiple Selections:
Lavalier Transmitter (TX) Receiver (RX)
2
WM300(A)= x2 + + + + x3 + + x2 + + +
WM300(C)= + + + + x2 + + + + +
3.5mm Mic Audio Input Cable
3.5mm TRS-TRS Audio Cable
3.5mm TRS-XLR Audio Cable
USB C Charging Cable
Belt Clip
Cold-shoe Mount
Wind Mu
Portable Box
User Manual
Warranty Card
Accessories:
1
1
1
2
2
2
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
8
8
8
9
9
9
10
10
10
1 2 3 45 6 7 8 9 10
The accessories of each combination include：
User Manual
UHF Wireless Microphone
3
Components and Instruction
Lavalier Transmitter (TX)
①Antenna
②LCD Screen
③Power/Muting Button:
Long press for ON/OFF; Short press for mute.
④SET Function Button:
Long press to enter the function adjustment menu;
Short press to confirm.
⑤Audio Status Indicator:
Blue light keeps on when in normal recording;
Red light keeps on when in muting mode;
Red light flickers when in low power.
⑥Pairing Status Indicator:
Red light flickers when in IR sync;
Blue light keeps on after paired.
(No matter the channel paired or not)
⑦Function Selection Button +:
Short press to enter the next page.
⑧Function Selection Button -:
Short press to return to the previous page.
⑨Belt Clip Port
⑩1/4 Mounting Hole
⑪Charging Indicator:
Red light keeps on when charging;
Blue light keeps on when fully charged.
⑫USB-C Port
⑬Reset Hole
⑭IR Sensor
⑮MIC / LINE IN Audio Input Port:
MIC mode is for microphone input;
LINE IN mode is for external audio input,
such as smartphone music player;
Select the corresponding input mode will
bring you better audio eect.
⑪
①
⑩
⑨
③
②
④
⑦
⑧
⑤
⑭ ⑮
⑥⑫⑬
4
①Group A Antenna
②Group B Antenna
③Group A/B Working Status Indicator:
Blue light keeps on after successfully paired;
Blue light flickers when pairing fails;
Red light flickers when in IR sync/low power;
Red light keeps on when the group is closed.
④LCD Screen
⑤Power Button:
Long press for ON/OFF.
⑥SET Function Button:
Long press to enter the function adjustment menu;
Short press to confirm.
⑦Function Selection Button +:
Short press to enter the next page.
⑧Function Selection Button -:
Short press to return to the previous page.
⑨Belt Clip Port
⑩Charging Indicator:
Red light keeps on when charging;
Blue light keeps on when fully charged.
⑪USB-C Port
⑫Reset Hole
⑬3.5mm Audio Output Port
⑭IR Sensor
⑮3.5mm Monitoring Port
Receiver (RX)
⑩⑪⑫
① ②
⑨
⑤
④
⑥
⑦
⑧
③
⑭⑬ ⑮
5
H
A
A
Group
A
C H11
523.300MHz
Group A
CH 41 CH 11
Group B
A
A
B
B
A
AB
B
Screen Display and Menu Introduction
Lavalier Transmitter(TX):
Screen Display Instruction
Receiver:
Signal Strength High
Signal Strength Low
Group A
Group B
Normal recording
Muting
Muting（Unlocking）
Muting（Locking）
Power Indication
Group A/B
Channel
Group A/B
Audio dynamic display bar
Channel Frequency
H
L
Group A/B Signal Strength Display Bar
A/B Channel is ON：
A/B Channel is OFF：
Channel of Group A/B
Group A/B transmitting power Group A/B Receiving Audio Status Indication
Power Indication
6
Operation Instruction
1. Transmitting Signal Strength Adjustment
2. Muting Mode On/Off
3. Group A/B Setting
When set to ‘ Disable ’, the muting function cannot be used, the icon is:
When set to ‘ Enable ’, the muting function works, the icon is:
The muting mode can be controlled only when the screen is on, press any
button to light the screen and then press the Power/Muting Button to switch the
muting mode
When set to ‘ Power OFF ’, the corresponding group is closed, the icon is:
When set to ‘ Power ON ’, the corresponding group is open, the icon is:
Please set "Power OFF", to save power of the receiver when there is no
need for dual-group use
High RF Power Mode: With 80-120M working distance, high power consumption
and short standby time
Low RF Power Mode: With 30-60M working distance, low power consumption and
long standby time
H
A
A
RF Power
High
L
A
A
RF Power
Low
H
A
A
Muting
Enable
H
A
A
Muting
Disable
Group A Setting
Power ON
A
A
A
B
B
Group A Setting
Power OFF
A
A
A
B
B
B
B
7
Installation and Usage
1. Long press the power button for ON, pair the transmitter and receiver
A. Manual Channel-setting Pairing
Long press the receiver’s SET button to enter “CH” display page and select the desired
channel according to personal needs; Select “Sync” and then keep the IR sensor of the
transmitter and receiver closely aligned to pair
B. Auto-scanning Pairing
Select receiver’s "Auto scan" to get the optimal channel in the current environment; Select
"Sync" and then keep the IR sensor of the transmitter and receiver closely aligned to pair
2. Insert the 3.5mm TRS microphone into the MIC port, install the belt clip to the belt clip
port and wear it correctly
30cm
IR Screen IR Screen
8
Indice
Altri manuali Comica Microfono
Comica
Comica CVM-VM30 Manuale utente
Comica
Comica CVM-WM100 PLUS Manuale utente
Comica
Comica CVM-WS60 COMBO Manuale utente
Comica
Comica DUAL.LAV-D03 STC Manuale utente
Comica
Comica Vimo C Manuale utente
Comica
Comica Vimo S-MI Manuale utente
Comica
Comica CVM-WS50H Manuale utente
Comica
Comica RGB Umic Manuale utente
Comica
Comica SIG.LAV V05 MI Manuale utente
Comica
Comica CVM-VS07 Manuale utente
Comica
Comica CVM-V30 PRO Manuale utente
Comica
Comica CVM-VM10-K1 Manuale utente
Comica
Comica SIG.LAV V05 MI Manuale utente
Comica
Comica STA-X2D Manuale utente
Comica
Comica Vimo Q Manuale utente
Comica
Comica BoomX-U Manuale utente
Comica
Comica Vimo S-UC Manuale utente
Comica
Comica BoomX-D Manuale utente
Comica
Comica CVM-WM200 Manuale utente
Comica
Comica CVM-VS50 Manuale utente
