Commax CDL-30LRC Manuale utente
Digital Door Lock CDL-30LR / 30LRC
User Manual
COMMAX CO.,Ltd.
•
Thank you for purchasing COMMAX products.
•
Please carefully read this User’sGuide (in particular, precautions for safety) before using a product
and follow instructions to use a product exactly.
•
The company is not responsible for any safety accidents caused by abnormal operation of the product.
Product Feature
Durable door lock without A/S
We produce this door lock under strict quality assurance systembased
on KS certification
Durable body using metallic material
We design the durable body using metallic material for suitable
for fire or impact
Automatic lock / Re-lock / Double lock functions
We think the customers security and convenient so it is easy
to use and very safety.
Safe to use the pin number with dummy number
You can use your pin number safely with dummy pin number.
Multi-registrations for pin-number & electronic key
It is easy to register the pin-number(up to 4) and you can also
register the electronic key(up to 30 ea).
Multiple volume control / optional mute
You can easily adjust the volume up to 7 phases.
Easy to detectable Blue-light button
You can easy to use the device using blue-light keypad buttons
Emergency power(9V square battery)
You can use the digital door lock using emergency power even
if the batteries run out completely.
Anti high-voltage / anti fireproof / anti-hacking system
It is very safe for using anti high-voltage and anti-hacking system.
Also if the temperature is higher than certain temperature,
the door will be open automatically with warning sounds
under the fire.
Warning
Don’t install, repair or
disassemble the
device randomly.
Don’t push or insert
the button with drill
or pin.
When you clean the
device, please use
the dry towel.
To Change the
pin-number regularly
for the safety.
To replace the battery,
you need to replace
all new alkaline
batteries.
Don’t impact on
the device.
Don’t use it for other
purpose except digital
door lock.
A / S and please keep
the product warranty.
Product warranty
Don’t put water into
the device.
This devise is for the
fire door products,
so it may not operate
for other environment
normally.
Use the device after
reading the user
manual.
There may be some
burst or leakage from
batteries if you insert
the batteries reversely.
Product Feature
Specification & features
Setting the Pin-number
Part names
How to use
Setting the electronic-key
Deleting the electronic-key
Opening the door at outside
Locking the door at outside
Opening the door at inside
Locking the door at inside
Locking the door by force
Setting & deleting the manual
locking LED function
Convenient functions
(Optional)
Setting the automatic locking
Setting the manual locking
Setting the sound temporary pause
Setting the sound volume
Setting the detection of RFID with
automatic or manual
Setting the connecting of remote
controller
Emergency alarm Alarming the high temperature
Alarming the break-in
Alarming to prevent the trick &
function of stop operating 1 minute
Alarming the jam of square catches
Warning the battery replacement
Emergency power
Emergency Key
Cause of disorders & Solution
1 ch
Specification & features
Division
Specification of product
Spec.
Applicable
Access methods
Power Source
Emergency power
Type of product
Temperature alarm
Material
Normal fire door
Pin number
Electronic Key
Anti-fireproof type, Temperature sensor type, Key type, Master key door lock(D-F-T-K-M)
Fireproof type, Temperature sensor type, Key type, Master key door lock(D-NF-T-K-M)
DC 6V
DC 9V
Temperature sensor
Outer body
Inner body
Thickness 35mm ~ 50mm
4~12 digit number combination (Up to 4 pin number)
Up to 30 keys
Alkaline AA battery, 4 pcs(LR6 1.5V AA size)
Alkaline battery(Optional)
72 degree ± 5 degree (lat tested)
62 degree ± 5 degree(Normal test)
Al, Zn, Pc
Al, Zn, ABS
RF Specification
Item
RFID
Wireless devices
For safe system
Frequency
13.56Mhz
447.275Mhz
1 ch ASK
Under 93.5dBuV/m@10m
FSK Under 10mW
Channel Modulation Power
Features
Outer body Inner body
Remote controller
(CDL-30LRC only)
Mortise Sticker Screws User manual
Battery 8 pcs Warning sticker
Drawing for screw hole
Electronic key 4 pcs
Emergency key 2 pcs
(Key type only)
Outdoor shaft
Part names
Outer body
Emergency 9v battery
(not supplied)
No. Name Feature
Key buttons
Electronic keyhole
Battery warning light
Emergency key cover
Emergency key hole
Outer handle
Terminal for
emergency power
To use to register or change the pin number.
You can open the door with registered pin number.
You can open/register the electronic key.
Light will be on with low power with warning sound.
Key type only
Key type only
To use open/close the door at outdoor.
When the battery is discharged completely, you can operate
the devices with contact the 9V battery to the terminal.
Inner body
No. Name Feature
Battery cover
Cover for battery and buttons for registration of pin number & electronic key.
Registration button Using registration or change the pin number or electronic key
It is the device to lock or close the door for installing side of door.
It can lock the door to door frame
It can prevent to shake the door.
Power for operation door lock
Using lock the door under manual mode
Using open or close the door at inside.
You can lock the door and it can’t be opened at the outside such
as night time.
(LED will be blinking when the door is unlock under manual locking mode.)
Mortise
Dead bolts
Wrench bolts
AlkalineAA battery
Inner handle
Button for manual lock
Button for double
lock
How to use
Setting the Pin-number
Please set the pin number
while you open the door.
Open the battery cover,
Push the registration button once
then you can hear “Beep” sound
Lift up the cover of keypad and
check the lights on in the keypad.
Set the pin number 4 to 12 digits.
Set the pin number 4 to 12 digits.
button than the registrationPush the
Go to outside
Outside
Outside
Warning!
Warning!
Note
If you add the other pin-number, you repeat ③,④until turn off the
lights on keypad. (Pin number can be registered up to 4 pin numbers.
The registration will be canceled when you do not push any numbers
for 10 seconds after push the registration button. If you register new
pin-numbers, old one will be deleted automatically.
Go to outside
Outside
Outside
Setting the electronic-key.
Note
Warning!
If you register or re-register new electronic-keys,
you need to register all electronic-keys at once.
Open the battery cover, Push the
registration button once then you
can hear “Beep” sound.
Lift up the cover of keypad
Contact the electronic-key to the
electronic-key receiver in order.
(You can hear the sound when you
register each electronic-key)
You can complete the registration
when you close the cover of
keypad or push the [ ] button on
the keypad.
Warning!
If you add the other electronic-key, you repeat
③,④until turn off the lights on keypad.
(Electronic-key can be registered up to 30.)
The registration will be canceled when you do not contact any
electronic-keys for 10 seconds after push the registration button.
If you register new electronic-keys, old one will be deleted
automatically.
“Beep”“Beep”
“Beep”“Beep”
Go to outside
Outside
How to use
Deleting the electronic-key
Open the battery cover, Push the
registration button once then you
can hear “Beep” sound.
Check the light of key numbers.
Push the buttons for 5 seconds,
all the electronic-keys will be deleted
with the sound.
5 sec.
Opening the door at outside
No.1 Using pin-number
Touch the key and
push the pin-number.
Push the button,
you can hear the sound
and open the door.
“Beep”“Beep”
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Commax Serratura della porta
