Commax CAV-1020IG+ Manuale utente
Printed In Korea / 2016.06.104
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
PM0770N00010
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com
•Thank you for purchasing COMMAX products.
•Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
•The company is not responsible for any safety accidents caused by abnormal operation of the product.
GATE VIEW PLUS MONITOR (CAV-1020IG+)
User Manual
코맥스 제품을 구입해 주셔서 대단히 감사합니다.
사용하시기 전에 본 설명서(특히 안전을 위한 주의사항)를 잘 읽어 보시고, 정확하게 사용하여 주시기 바랍니다.
본 제품이 정상적인 동작상태가 아닌 상황에서 발생한 방범 및 방재사고에 대해서는 당사가 책임지지 않습니다.
게이트뷰 플러스 모니터
CAV
-
1020IG+
제품 사용 설명서
Contents
1. Greetings
1.
2.
3.
4. Operation.................................................................................................................................... 5
5. BRIGHT / COLOR / CONT setting (Available only in monitoring mode ............................6
6. How to use lobby phone ......................................................................................................... 7
7. Installation method ................................................................................................................... 8
8. Wiring ......................................................................................................................................... 8
9.
Pa
rt l
ist ........................................................................................................................................9
10.
Thank you very much for purchasing of COMMAX products.
Please read carefully this user manual and follow its rules.
This intercom can be used in offices, and shopping outlets, and provide
convenience to use communication on long distances.
1. Warnings and caution ··········································································
2. Part name and Function ·······································································
3. Usage instruction ················································································
4. User Setting·······················································································
5. System Setting ···················································································
6. How to use lobby phone ·······································································
7. Installation method ··············································································
8.
Wiring method····················································································9.
Component························································································
10. Instructions for use ············································································
11. Miscellaneous···················································································
12. Specication·····················································································
Table of contents
3
5
9
11
14
15
6
16
18
18
18
15
2
10
9
1.Warnings and caution
Please follow the things described below in order to prevent any
danger or property damage.
Warning
Caution
Prohibition.
No disassembly
No touch
Must follow strictly.
Shows plugging out the power cord
without an exception
Shows the warning and caution for an electric shock.
Shows the warning and caution for a fire.
It may cause a serious damage or
injury if violated.
It may cause a minor damage or
injury if violated.
Power & Installation
Warning
Please don’t use several
products at the same time on
one power socket.
·It may cause a fire due to an
abnormal overheating.
Please don’tbend the power
cable excessively or it may
cause an electric shock.
·fire when using a damaged
power cable.
Please don’thandle the power
cable with a wet hand.
·It may cause an electric
shock.
Please plug out the power
cable from the socket when
not using it for a long period
of time.
·It may shorten the product
lifespan or cause a fire.
Please don’t install the
product in the place where
there is much oil, smoke or
humidity.
·It may cause an electric
shock or fire.
Please don’t install the
product with the lightening
and thunder.
·It may cause an electric
shock or fire.
Please don’tuse and connect
this product with other
products with different rated
voltage
·It may cause a disorder or
fire.
When installing the product
that generates heat, please
install the product away from
the wall (10cm) for the
ventilation.
·It may cause a fire due to
the increased internal
temperature.
3
Cleaning & Use
Please don’tdisassemble,
repair or rebuild this product
arbitrarily (please contact the
service center if a repair is
needed.
·It may cause an electric
shock or fire.
Please plug the power cable
firmly into the inner end
·It may cause a fire.
Please hold the plug tightly
when unplugging the power
cable (a part of the copper
wire may be disconnected if
the grabbing is only made on
the cord when pulling out the
cable).
·It may cause an electric
shock or fire
When connecting the power
cables after cutting the cable,
please install the product with
power off
·It may cause an electric
shock or fire
When installing the product,
please fix it firmly while using
the wall-mounting unit and
screws.
·It may cause an injury from
the falling object.
Please be careful when using
an AC circuit breaker since
there is a possibility of an
electric shock.
When cleaning the product,
please rub it with a soft and
dry cloth after plugging out
the power cable. (Please don’t
use any chemical products
such as wax, benzene, alcohol
or cleanser.)
Please don’t drop the product
on the ground and don’tapply
a shock .
·It may cause a failure.
Please use the designated
connection cable within the
maximum calling distance
designated for the product
·It may reduce the product
performance.
Please check the use voltage
and current for the DC-only
products and use the
appropriate rectifier.
·It may cause a fire.
Please avoid direct rays of the
sun or heating devices at a
time of installation.
·It may cause a fire.
Please don’t install the
product on an unstable place
or small support board.
·It may cause an injury if it
falls down while in use.
If an abnormal sound, burning
smell or smoke is coming out
of the product, please plug out
the power cable and contact a
service center.
·It may cause an electric
shock or fire.
Please don’t insert any
metallic or burnable materials
into the ventilation hole.
·It may cause an electric
shock or fire.
Please use only the designated
batteries for the products of
using DC power.
·It may cause an electric
shock or fire.
Cleaning & UsePower & Installation
Warning
Caution
4
2. Part name and Function
①LCD monitor : menu, visitor display
②speaker
③Microphone
④Power indicator LED
⑤Away button: For Away set/clear
⑥Monitoring button: Lobby monitoring
⑦Guard call/ paging elevator button : Guard call/ paging elevator
⑧Door release button : For opening door
⑨MENU button : For Menu start/exit
⑩Talk button : For call start/exit
⑪On/Off Switch
⑫External wiring connection socket: For Lobby, Guard, Alert and Security sensor connection
※ This product is compatible with Lobby, Guard unit for Gateview System
Description
LCD monitor
Speaker
Microphone
Power indicator LED
5
6
7
8
9
10
11
12
MENU button
Talk button
On/Off Switch
External wiring connection
socket
Away button
Monitoring button
Guard call/ paging elevator button
Door release button
No No No
1
2
3
4
Description Description
5
3. Usage instruction
3-1. Call from the individual entrance
3-2. Call from the Lobby
①
Visitor’s image will be shown on the monitor with emitting chime sound when a visitor presses the call
button
②
Press the talk button by watching visitor and talk with a visitor.
(Screen will beturned off after 60 sec automatically from the beginning of conversation)
③
When you receive the call from Lobby or Guard Station during the conversation with the individual
entrance, the electronic chime sound rings. Then, press the monitoring button from the video phone to
finish the conversation with lobby andhave a conversation with visitor.
④
When you press the door release button in the middle of conversation, the lobby gate will be opened
with switchgear sound and the conversation will be finished.
3-3. Conversation with guard
①
The sound of call will be emitted when it has a call from guard.
②
Press the talk button to begin the conversation
③
While talking over the phone with the guard station, lower call sound of monitoring will be emitted.
Then, press the monitoring button from the video phone to finish the conversation with lobby and have
a conversation with visitor
(2)Calling the guard station
①
Press the “Talk” button and “Guard call” button in sequence.
②
Conversation will begin when a guard station responds
3-4. Monitoring
When you receive initial call , your device automatically searches for the door camera and displays OSD
accordingly
①
When the visitor presses the call button, an electronic chime sound rings and
the visitor’s image appears on the monitor.
②
Conversation with the individual entrance will begin when you presses the call
button. To release the door lock, press the door release button.
(Only in case ofusing the screen turned on, open& shut can be used)
③
When you receive the call from Lobby or Guard Station during the conversation
with the individual entrance, the electronic chime sound rings. Then, press the
talk button to end the call with a guard station and press the call button again to
begin the conversation with a visitor .
④
Screen will be turned off after 60 sec automatically, press the monitoring button
to check again.
⑤
When press the talk button after the end of talking with a visitor, screen is turned
off and all is done.
(1) Call from the guard
6
By pressing monitor button, display above appears. If you press button of your desired
space (monitoring[ ], guard[ ] ), you can monitor according space.
(Door, Lobby,)
- Monitoring (DOOR/LOBBY)function time is 30secs
- You can talk by pressing call button while monitoring(DOOR/LOBBY)
- You can monitor only certain lobby with pre-set ID
Display with Door camera Display with no Door camera
7
3-5.
①If the elevator pager(CCU-310EV) is connected with monitor, you can use this function.
②When you press the guard button while in standby or talking status, The menu is displayed as shown in
the picture. (However, the 'GUARD' menu is not displayed when talking with the lobby or guard )
③For paging elevator, press the ELV(corresponding button) while the menu is displayed.
④When you page the elevator, “Elevator CALL” message will be displayed at the top of screen.
⑤If you don’t page the elevator, press the EXIT(Talk button).
When the security bell rings, after checking whether it is real or not, by pressing ‘away’ button once,
you can turn off away mode and can return to initial state with LED blinking and alert tone stopped.
(When the security bell rings , the release / return is only possible when the sensor is in the normal
state, that is, in case of crime security 1, in the state where the contact of the magnetic sensor is
made, in case of crime security 2, only when the motion detecting sensor does not detect any
movement or intruder.)
3-. Bypass call function [used with away mode]
●
When householde sets away mode, visitor at lobby or door camera is automatically connected to
guard station.
(In this case, volume of the call can be lower as it is bypassing another route.)
3-. ALARM1( fire ) function
(1) When alert1 sensor detects fire, alarm tone rings
(Fire engine sound) at guard station and monitor
(2) After checking alert situation is terminated, press away
button twice.
(One time: release/ two times: return), after return, front
LED blinking and security 2 alert tone stops.)
8
(2) How to turn off the away set
After return, by pressing ‘away button’ once, the entire front LED stops blinking and away mode is turned off
with ‘beep’ sound. The device delivers the away mode off message to guard station. It must be turned off
within the away mode off time.
(When released from factory, away mode off time is initially set for 0sec. You can change it from 0 to 90 sec
by pressing setting button.)
※ Notice: If you don`t turn the away mode off, the device will consider you as an intruder and
alert tone will ring
(3) How to turn off the security bell
(1) How to set Away set
①
When you press the 'away' button in standby mode, the "beep" sound occurs and the whole front
LEDs blink and Away mode is set
②
In the away mode, after away set time finishes, the household unit detects security sensor and
changes into security mode. The entire front LED stops blinking and remains turned on
③
After setting away mode, you should go out within set time.
( AWAY set time: It is initially set for 60 sec and you can change it from 0 to 90 sec by pressing
setting button.)
④
After away mode is set, if device detects something abnormal ( external incursion ), the entire front
LEDs Immediately flash and the security ring tone will be generated at the household unit and
guard unit
Away and security function enabled by connecting to Security 1(magnetic sensor) and Security 2(PIR
sensor)
3-. Away and security function
4. User Setting
After Menu screen appears, you can change setting with below 4 buttons
Menu start and finish :[ ] (Menu button -‘[ ] ’)
SELECT : [ ] (Guard button-‘[ ] ’)
Move upward /move right : [ ] (Door release button –‘▲’ / ‘▶’)
Move downward /move left : [ ] ( Monitor button–‘▼’ / ‘◀’)
After pressing MENU button in Video call or monitoring mode, you can change settings for
DOOR(LOBBY), VIDEO SET(BRIGHTNESS / CONTRAST/ COLOR), UTILITY (ADDITIONAL
FUNCTION) and INFORMATION (product information)
4-1.Display setting
DOOR(LOBBY) VIDEO SET (BRIGHTNESS / CONTRAST/ COLOR control function).
After moving to menu with MENU button, press SELECT button to move to the menu below.
(you can control LOBBY VIDEO SET while you are talking with lobby.)
(1) BRIGHTNESS : control BRIGHTNESS
(2) CONTRAST : control CONTRAST
(3) COLOR : control COLOR
You can control from 0 to 20 level. Initial level is set for level 10
9
This product can be interlocked with Digital Door Lock via RF module and please refer to connection
diagram.
3-. Approximate alert function
①
In emergency situation, alert tone is generated and this is delivered to guard station
②
The message notification is delivered until household turns off the security mode
③
After notification, devices changes in to stand-by mode
Stand-by mode: pre-mode for ring tone alert. When you receive calls from exterior, device sends
alert tone rings to external devices. (lobby, etc.)
-
(1) When sensor 2 detects gas release, security2
(Hospital alert tone)alert tone occurs at monitor and guard
station device
(2) After checking alert situation is terminated, press away
button twice.
(One time: release/ two times: return), after return, front
LED blinking and security 2 alert tone stops
3-. ALARM2(Gas) function
4-2. UTILITY (additional function)
After moving to SPEAKER VOLUME from UTILITY, press SELECT button for SPEAKER VOLUME.
Select your desired setting.
Complete your setting by pressing SELECT button
(2) CHIME-BELL VOLUME : control ringing tone
You can control from 0(MUTE) to 3 level. Initial level is set for level 2.
※ how to set
After moving to CHIME-BELL VOLUME from UTILITY, press SELECT button for CHIME-BELL VOLUME.
Select your desired setting.
Complete your setting by pressing SELECT button.
4-3. INFORMATION (product information.)
After entering to menu by pressing menu button, you can move to INFORMATION and check product
information
(1) MODEL : Shows product name
(2) VERSION : Shows program version
(3) HOME ID : Shows current building No. / Household No
(4) TOUCH : Shows touch program version
(5) VIDEO : Shows current camera output standard. (NTSC / PAL)
(6) SOURCE : This indicates location of current video (Household door unit & Lobby entrance)
Exit from menu
4-4. EXIT
(3)EXIT: Return to EXIT of initial menu
10
(4) RESET: reset display setting
※ how to set
After moving to RESET from DOOR VIDEO SET, press SELECT button for RESET.
Select YES with move button.
Complete your setting by pressing SELECT button
※ Notice :Display control and reset function adjusts each video(DOOR/LOBBY) collectively
(5) EXIT: Return to EXIT of initial menu
After moving to MENU with MENU button, press SELECT button to move to below screen
(1) SPEAKER VOLUME: control call volume
There are 3 levels of volume control options and default is level 2
※ how to set
After moving to menu with your desired MENU from ‘DOOR VIDEO SET’, press SELECT
button to move to the menu below
(you can control ‘LOBBY VIDEO SET’ while you are talking with lobby.)
※ how to set
Indice
Altri manuali Commax Monitor
