CommScope ODF-SPLCAB-24 Manuale utente

TC-96282-IP

Rev C, May 2020

commscope.com

User Manual

Universal Mount

Splice Cabinet

860657162 Rev C

Contents

1 Product Description. . . . . . . . . . . . . . . . . . . . .2

1.1 General Description. . . . . . . . . . . . . . . . . . . . .2

1.2 Dimensions and Specifications . . . . . . . . . . . .4

1.3 Typical Application . . . . . . . . . . . . . . . . . . . . .5

2 Unpacking and Inspection . . . . . . . . . . . . . . . .6

3 Mounting the Cabinet . . . . . . . . . . . . . . . . . . .6

3.1 Mounting Options and Tools . . . . . . . . . . . . . .6

3.2 Mounting on Two-Post Equipment Rack . . . . .6

3.3 Mounting on Four-Post Frame . . . . . . . . . . . .8

3.4 Mounting Cabinet on Wall . . . . . . . . . . . . . . . .9

3.5 Grounding Cabinet . . . . . . . . . . . . . . . . . . . .11

4 Installing Cables and Loading Splice Trays .11

4.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

4.2 Installing Splice Trays . . . . . . . . . . . . . . . . . .13

4.3 Removing Splice Trays . . . . . . . . . . . . . . . . .15

4.4 Breaking Out Facility Cables . . . . . . . . . . . . .15

4.5 Securing Facility Cables Inside Cabinet . . . .16

4.6 Securing Facility Cables Outside Cabinet . . .16

4.7 Loading Splice Trays. . . . . . . . . . . . . . . . . . .18

4.8 Performing Splices . . . . . . . . . . . . . . . . . . . .20

4.9 Changing Splice Trays . . . . . . . . . . . . . . . . .20

5 Related Publications . . . . . . . . . . . . . . . . . . .20

6 Contact Information . . . . . . . . . . . . . . . . . . . .20

Introduction

This user manual provides general information

and installation procedures for the Universal

Mount Splice Cabinet, shown at right in 24 tray

and 12 tray sizes with 19-inch mounting brack-

ets. Procedures include:

• Unpacking the cabinet

• Mounting the cabinet on a rack or 4-

post frame

• Mounting the cabinet on a wall

• Preparing cables for installation

• Installing cables

• Setting up splices

This manual also tells how to obtain technical

assistance.

24 Tray Cabinet

12 Tray Cabinet

TC-96282-IP

1 Product Description

1.1 General Description

The Universal Mount Splice Cabinet is a compact splice enclosure that provides a splicing

interface between facility cables. Facility cables are high-fiber-count cables containing rollable

ribbons, and of a type suitable for being routed indoors or outdoors. The splice cabinet is

available in two sizes: 24 trays (ODF-SPLCAB-24, shown in Figure 1), and 12 trays (ODF-

SPLCAB-12), which is analogous in features.

The splice cabinet mounts on a 19-inch or 23-inch equipment rack or four-post frame. It can also

be mounted on a wall. The 24 tray splice cabinet accommodates up to 24 splice trays, each with

a capacity of up to 24 rollable ribbon, mass fusion 12-fiber splices, for a total of up to 6912

spliced fibers per cabinet. The 12 tray splice cabinet has a capacity of 12 rollable ribbon, mass

fusion 12-fiber splices, for a total of up to 3456 spliced fibers per cabinet.

Figure 1. Interior Components of Universal Mount Splice Cabinet

(ODF-SPLCAB-24 shown)

27008-A

FRONT

OBLIQUE

VIEW

NORMAL

FRONT

OBLIQUE

VIEW

EXPLODED

SPLICE

TRAY

STACK OF

SPLICE

TRAYS

EXIT FOR

FACILITY

CABLES

(REF)

WALL

MOUNTING

BRACKET

(REF)

TRAY

HOLDER

BRACKET

(2X)

RADIUS

LIMITER

(6X)

ENTRY

FOR

FACILITY

CABLES

19-INCH

BRACKET

23-INCH

BRACKET

MOUNTING

BRACKETS

TC-96282-IP

Figure 1 shows the interior components of the splice cabinet including:

•Splice Tray -- is the FOST-ACC-D-TRAY-RR-288-KIT tray, which holds up to 24 mass

fusion 12-fiber splices for a total of up to 288 spliced fibers per splice tray.

•Stack of Splice Trays -- consists of up to 12 splice trays mounted on a tray-holder

bracket and held in place with a hook-and-loop strap. Unfastening the strap for a partic-

ular splice tray allows the tray to hang down for examination. A splice tray can be easily

removed to a work surface for fiber routing and splicing. The ODF-SPLCAB-24 has two

stacks of splice trays. The ODF-SPLCAB-12 has one stack of splice trays.

•Entry and Exit for Facility Cables -- are brush-lined openings through which facility

cables pass in and out of the cabinet.

•Radius Limiters -- are cable routing guides that are used to prevent cables from being

bent or kinked beyond the recommended minimum.

•Mounting Brackets -- provide 19-inch, 23-inch, and wall-mount options.

Figure 2 shows the top half of the 24 tray splice cabinet loaded with splice trays and cables. The

12 tray cabinet has essentially this same configuration alone.

Figure 2. Top Half of Splice Cabinet

(ODF-SPLCAB-24 shown)

TC-96282-IP

1.2 Dimensions and Specifications

Table 1 lists specifications for the two sizes of the splice cabinet. Figure 3 shows dimensions of

the 24 tray splice cabinet (ODF-SPLCAB-24). Figure 4 shows dimensions of the 12 tray splice

cabinet (ODF-SPLCAB-12).

Figure 3. 24 Tray Universal Mount Splice Cabinet (ODF-SPLCAB-24) Dimensions

Table 1: Splice Cabinet Specifications

Parameter ODF-SPLCAB-24 ODF-SPLCAB-12

Dimensions (H x W x

68.5 in.(174 cm) x 17.84

in.(45.3 cm) x 11.54 in. (29.3

cm)

42.3 in.(107.4 cm) x 17.84

in.(45.3 cm) x 11.54 in. (29.3

cm)

Weight 52 lbs. (23.6 Kg) 32 lbs. (14.5 Kg)

Splice tray used FOST-ACC-D-TRAY-RR-288-

KIT (760243050)

FOST-ACC-D-TRAY-RR-288-

KIT (760243050)

Number of splice trays Up to 24 (2 stacks of 12 trays) Up to 12 total (1 stack of 12

trays)

Total number of

splices

Up to 6912 fiber splices (576

mass fusion 12-fiber splices)

Up to 3456 fiber splices (288

mass fusion 12-fiber splices)

Cable type Rollable ribbon Rollable ribbon

Fiber count capacity 6912 in, 6912 out 3456 in, 3456 out

Mounting options Can be mounted on a 19-inch

or 23-inch equipment rack or

4-post frame or on a wall

Can be mounted on a 19-inch

or 23-inch equipment rack or

4-post frame or on a wall

27009-A

68.5 IN.

(174 CM)

17.84 IN.

(48.30 CM)

11.54 IN.

(29.3 CM)

TC-96282-IP

Figure 4. 12 Tray Universal Mount Splice Cabinet (ODF-SPLCAB-12) Dimensions

1.3 Typical Application

Figure 5 shows a typical splice cabinet installation with facility cables in a 24 tray cabinet. The 12

tray cabinet is analogous in routing.

Figure 5. Universal Mount Splice Cabinet Application Example

(ODF-SPLCAB-24 shown)

27241-A

42.3 IN.

(107.4 CM)

17.84 IN.

(48.30 CM)

11.54 IN.

(29.3 CM)

97010-A

SPLICE CABINET

FACILITY CABLES

FACILITY CABLE

SUB-UNITS

(EACH GOES TO ONE

SPLICE TRAY)

FACILITY CABLE

SUB-UNITS

(EACH GOES TO ONE

SPLICE TRAY)

SPLICE

TRAYS

(12 IN EACH

STACK)

FAR OFF EQUIPMENTNEAR BY EQUIPMENT

NOTE: FACILITY

CABLES MUST BE

DIVISIBLE INTO

SUB-UNITS OF

288 FIBERS

OR LESS.

NOTE: THIS

DIAGRAM IS A

FUNCTIONAL

SCHEMATIC;

IT DOES NOT

SHOW CABLE

ROUTING IN

CABINET.

TC-96282-IP

2 Unpacking and Inspection

Use the following procedure to unpack and inspect the splice cabinet.

1. Inspect the exterior of the shipping container(s) for evidence of rough handling that may

have damaged the components in the container.

2. Unpack each container while carefully checking the contents for damage.

3. If damage is detected or if parts are missing, file a claim with the commercial carrier and

notify CommScope Support Center at http://www.commscope.com/SupportCenter

4. Save all shipping containers for use if the equipment requires shipment at a future date.

3 Mounting the Cabinet

3.1 Mounting Options and Tools

The Universal Mount Splice Cabinet can be mounted on a 19-inch or 23-inch equipment rack or

4-post frame. Alternatively, the cabinet can be mounted on a wall.

Mounting brackets must be separately ordered; for catalog numbers and Material IDs (MIDs),

refer to Table 2.

A Phillips #2 screwdriver is required in all installations. In addition, a level is required for wall

mounting.

3.2 Mounting on Two-Post Equipment Rack

The cabinet can be mounted on a 2-post 19-inch or 23-inch equipment rack using the mounting

brackets identified in Table 2 (separately ordered). The door must be fastened to the cabinet

when mounting the cabinet on an equipment rack.

Note: The 24 tray splice cabinet (ODF-SPLCAB-24) is shown in figures, Same process is

valid for the 12 tray splice cabinet (ODF-SPLCAB-12).

Note: If mounting the 12 tray splice cabinet (ODF-SPLCAB-12) to an equipment rack, only 4

of the 6 brackets are used.

Table 2: Mounting Bracket Kits

Kit Catalog Number MID Description

ODF-ACC-BRK-19 760245549 19-inch mounting brackets kit

ODF-ACC-BRK-23 760245550 23-inch mounting brackets kit

ODF-ACC-BRK-WM 760245551 Wall mounting brackets kit

TC-96282-IP

Use the following procedure.

1. Select and install the appropriate mounting brackets (Figure 6).

Figure 6. Two Post Installation Mounting Bracket Location

2. Fasten the splice cabinet to the rack with #12-24 screws and lock washers, as shown in

Figure 7.

Figure 7. Mounting the Splice Cabinet on an Equipment Rack

27012-A

MOUNTING

BRACKET (6X)

STAR

WASHER

MOUNTING

BRACKET

M4 SCREW

(8 mm LONG)

27011-A

MOUNTING

BRACKET (6X)

TC-96282-IP

3.3 Mounting on Four-Post Frame

The cabinet can be mounted on either a 19-inch or 23-inch four post frame using the mounting

brackets identified in Table 2 on page 6 (separately ordered). The door must be fastened to the

cabinet when mounting the cabinet on a four-post frame. Use the following procedure.

1. Select and install the appropriate mounting brackets (Figure 8).

Figure 8. Four Post Installation Mounting Bracket Location

2. Fasten splice cabinet to frame with #12-24 screws and lock washers (Figure 9).

Figure 9. Mounting the Splice Cabinet on a Four-Post Frame

27013 -A27013 -A MOUNTING

BRACKET (6X)

STAR

WASHER

MOUNTING

BRACKET

M4 SCREW

(8 mm LONG)

27014-A

MOUNTING

BRACKET (6X)

TC-96282-IP

3.4 Mounting Cabinet on Wall

Figure 10 shows the features of the wall mounting brackets.

Figure 10. Wall Mounting Bracket

Figure 11 shows the mounting dimensions for the two cabinet sizes.

Figure 11. Wall Mounting Dimensions

Use the following procedure.

Note: The 24 tray splice cabinet (ODF-SPLCAB-24) is shown in figures, Same process is

valid for the 12 tray splice cabinet (ODF-SPLCAB-12).

27016-A

18.0 IN. (45.72 CM)

3.5O IN.

(26.07 CM)

MOUNTING HOLE (14X)

DIAM. 0.265 IN. (0.673 CM)

0.75 IN.

(1.91 CM)

HORSESHOE HOLE

FOR LEVELING CABINET

#12-24 THREADED

PEMS (3X)

FOR MOUNTING CABINET

TO BRACKET

27017-A

55.00 IN.

(139.70 CM)

18.00 IN.

(45.72 CM)

12.03 IN.

(30.54 CM)

3.50 IN.

(8.89 CM)

68.79 IN.

(174.73 CM)

REF

27245-A

28.50 IN.

(72.39 CM)

18.00 IN.

(45.72 CM)

19.00 IN.

(48.26 CM) REF

12.02 IN.

(30.52 CM)

REF

3.50 IN.

(8.89 CM) 42.29 IN.

(107.42 CM)

REF

ODF-SPLCAB-12

ODF-SPLCAB-24

TC-96282-IP

1. Remove the door from the front of the splice cabinet.

2. On the rear side of the cabinet, install the mounting bracket on the cabinet using the

#12-24 screws provided. The top and bottom brackets are identical in design. Select

from the possible hole configurations drilled into the back wall of the cabinet.

3. Install a single support screw in the wall to temporarily hold the top mounting bracket

Place the screw in the top center of the desired cabinet location.

Figure 12. Mounting the Splice Cabinet on a Wall

4. Hang the cabinet on the wall by positioning the middle horseshoe opening (shown in

Figure 10 on Page 9) on the support screw just installed. Level the cabinet.

Note: Install the screw part way only.

27015-A

#12-24

SCREWS

& WASHERS

(6X)

UNVERSAL MOUNT

SPLICE CABINET

SPLICE

CABINET

DOOR

WALL

MOUNTING

BRACKET (2X)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CommScope Allegato

CommScope

CommScope FDH 3000 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

CommScope

CommScope TENIO Manuale utente

CommScope

CommScope Mini-OTE 300 Tap Manuale utente

CommScope

CommScope FOWB Manuale utente

CommScope

CommScope BUDI-2S-SP Manuale utente

CommScope

CommScope Flex Frame Splice Cabinet Manuale utente

CommScope

CommScope NovuX Fiber Optic System Manuale utente

CommScope

CommScope RFP Manuale utente

CommScope

CommScope MDCC Manuale utente

CommScope

CommScope BUDI-M Manuale utente

CommScope

CommScope Mini-OTE 200 Series Manuale utente

CommScope

CommScope OFDC-B8G Manuale utente

CommScope

CommScope BUDI-M-FPS Manuale utente

CommScope

CommScope FOSC-450A Manuale utente

CommScope

CommScope AEKT Manuale utente

CommScope

CommScope FOSC-500-AA Manuale utente

CommScope

CommScope AMP NETCONNECT 2U Multi-Fiber Push-On Manuale utente

CommScope

CommScope FOSC-ACC-B-TRAY-12-RBN Manuale utente

CommScope

CommScope NOVUX CC 100 Manuale utente

CommScope

CommScope CHD Series Manuale utente

CommScope

CommScope FOSC-450-BS Manuale utente

CommScope

CommScope NOVUX Compact Closure 100 Series Manuale utente

CommScope

CommScope FTUO Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente

NewerTech

NewerTech Voyager S3 Manuale utente