Compaq TFT5010 Manuale utente

Writer: MSilvetti Saved by: MSilvetti

Saved date: 10/12/99 5:25 PM

Part Number: 159154-021File name: 159154RT.doc card

USER’S GUIDE

Compaq TFT5010 Flat Panel Monitor

Part Number: 157254-001 - Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:18 PM

File Path: P:\Docs\Monitors\Nina\157253U1

Notice

The information in this guide is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE

LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR

OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES RESULTING FROM THE

FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.

This guide contains information protected by copyright. No part of

this guide may be photocopied or reproduced in any form without

prior written consent from Compaq Computer Corporation.

1999 Compaq Computer Corporation.

Compaq and Deskpro are registered in the U. S. Patent and

Trademark Office.

Microsoft, MS-DOS, Windows, Windows NT, and other names of

Microsoft products referenced herein are trademarks or registered

trademarks of Microsoft Corporation.

ENERGY STARis a U.S. registered mark.

Product names mentioned herein may be trademarks and/or

registered trademarks of their respective companies.

The software described in this guide is furnished under a license

agreement or nondisclosure agreement. The software may be used

or copied only in accordance with the terms of the agreement.

First Edition (October 1999)

Part Number 157253-001

Compaq Computer Corporation

User’s Guide

Compaq TFT5010 Flat Panel Monitor

English 1

ttttt

Part Number: 157254-001 Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Nina

English

Product Features

The Compaq TFT5010 Flat Panel Monitor has an active matrix, thin-

film transistor (TFT), liquid crystal display (LCD). The monitor

features include:

■ 15-inch (38.1-cm) viewable area display

■ 1024 × 768 resolution, plus full-screen support for lower

resolutions

■ Wide viewing angle to allow viewing from a sitting or standing

position, or when moving side-to-side

■ Tilt and swivel capabilities

■ Removable base for flexible mounting solutions

■ Includes DVI signal connector (two DVI cables included - one

digital and one analog); a digital connection requires a special

digital-compatible graphics adapter card

■ Plug and Play capability if supported by your system

■ On-Screen Display (OSD) adjustments in six different languages:

English, Dutch, French, German, Italian, and Spanish for ease of

set-up and screen optimization

■ Programmable Sleep Timer

■ CD-ROM includes an information file (INF), Image Color

Matching file (ICM), Colorific Software package, the Compaq

LCD Display Assistant setup and configuration utility, the

Compaq Display LiteSaver utility, and product documentation

■ Model with additional protective panel available

■ Security lock slot

■ AssetControl

■ Energy Saver feature for Energy Starcompliance

■ Monitor base includes a housing space for an optional USB hub

2English

Part Number: 157254-001- Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Nina

■ Compliance with the following regulated specifications:

❏ EPA ENERGY STAR

❏ European Union CE Directives

❏ Swedish MPR II 1990

❏ Swedish TCO '99

Universal Driver Manager

This monitor may require a graphics driver (and/or .INF file) that is

compatible with your computer’s graphics adapter. The CD-ROM

included with this monitor contains an .INF file (see the section on

Information Files). Compaq has also created a Universal Driver

Manager (UDM) release that supports all graphics adapters found on

Compaq Deskpro and Compaq Workstation products. The UDM eases

graphics driver deployment across Compaq platforms ensuring cross-

compatibility and backward-compatibility. The resulting solution

enables customers to manage and control ongoing software

maintenance costs. The UDM is available on the Compaq Support

Software CD for Compaq Desktop, Portable, and Workstation

Products and the Compaq World Wide Web site (www.compaq.com).

Information Files

This monitor includes a CD-ROM with two information files to be

installed onto your computer—an .INF file and an .ICM file.

■ The .INF file defines monitor resources and provides

specifications used by Microsoft Windows 95 and Windows 98

to install support software for certain hardware devices. The .INF

file ensures monitor compatibility and optimization with your

computer’s graphics adapter.

■ The .ICM file provides color matching consistency from monitor

screen to printer and is activated from within the graphics

programs that have this feature.

To install these files on your computer, follow the instructions on the

CD-ROM or on the “Configuring Your Compaq LCD Monitor” card

located in the Program License Agreement packet along with the CD-

ROM. INF file updates are downloadable by clicking on:

www.compaq.com/products/monitors/index.html

English 3

Part Number: 157254-001- Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Aoki

Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the

monitor, computer system, and other attached devices, then follow

these steps:

1. Place the monitor in a convenient, well-ventilated location near

your computer.

2. Connect the DVI-I monitor signal cable to the VGA connector

1on the rear panel of the computer.

✎The monitor is shipped with the DVI-I cable already

connected to the monitor. When the monitor is connected

to the computer using the DVI-I signal cable, it is using an

analog signal interface.

3. Connect one end of the AC power cord to the AC adapter 2and

the other end 3to an electrical outlet that is easily accessible

and close to the monitor.

4English

Part Number: 157254-001- Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Nina

CAUTION: When connecting the monitor, be sure to use the

AC adapter supplied with the monitor. Failure to use this

AC adapter may result in damage to the monitor.

!WARNING: To reduce the risk of electric shock or damage

to your equipment:

„#

Do not disable the power cord grounding plug. The

grounding plug is an important safety feature.

„#

Plug the power cord into a grounded (earthed)

electrical outlet that is easily accessible at all times.

„#

Disconnect power from the monitor by unplugging

the power cord from the electrical outlet.

„#

Do not place anything on power cords or cables.

Arrange them so that no one may accidentally step on

or trip over them. Do not pull on a cord or cable.

When unplugging from the electrical outlet, grasp the

cord by the plug.

✎For security purposes, this monitor has been fitted with a

slot 4for use with a security cable lock that can be

purchased separately at most computer stores.

✎After you turn on the monitor, install the Compaq LCD

Display Assistant utility included on the CD-ROM. Use

the on-screen instructions to adjust the picture quality of

your monitor. To install this utility onto your computer,

follow the instructions on the “Configuring Your Compaq

LCD Monitor” card located in the Program License

Agreement packet.

IMPORTANT: Always activate a screen saver program, the program-

mable sleep timer, the Compaq Display LiteSaver utility, or turn off

the monitor when it is not in use for a prolonged period of time. All

LCD monitors that display the same static image on the screen for a

prolonged period of time may exhibit screen image retention. Please

note that image retention is not a permanent condition and will fade

over a period of time. Image retention is a condition that may occur on

all LCD screens.

English 5

Part Number: 157254-001- Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Aoki

Connecting the DVI-D Cable

To connect the DVI-D (Digital Visual Interface-Digital) cable to the

DVI-I (Digital Visual Interface-Integrated) connector on the back of

the monitor, you must first remove the monitor base cover and the

monitor back panel and disconnect the DVI-I connector.

CAUTION: Before beginning to disassemble the monitor, be

sure the monitor is turned off and the power and signal

cables are both disconnected.

✎The DVI-D cable supplied with this monitor is for digital

to digital connection only. Your computer must have a

DVI-compatible graphics card installed for use with this

cable. When connecting the DVI-D signal cable to the

DVI connector on the monitor, you must connect the other

end of the DVI-D cable to the DVI connector on the

computer.

To remove the monitor base cover and back panel, complete the

following steps:

1. Lay the front bezel down on a soft area to prevent it from

getting scratched, defaced, or broken.

2. Remove the cover 1from the monitor base by placing your

fingers in the opening on the bottom of the base and pulling

upward, then pulling out to remove the cover.

3. Remove the back panel 2from the monitor by pushing the

bottom tabs upward and pulling out to remove the panel.

6English

Part Number: 157254-001- Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Nina

4. Connect the DVI-D cable to the DVI-I connector 1on the back

panel of the monitor by threading the cable through the neck

yoke on the monitor base to the DVI-I connector, then connect

the other end of the cable 2to the DVI connector on the back

panel of the computer.

English 7

Part Number: 157254-001- Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Aoki

5. Replace the monitor back panel and monitor base cover.

6. Reconnect the power cable and power on the monitor and

computer.

The DVI connector on this monitor uses digital video information to

provide higher speed for higher display resolution. The results are

more precise video displays without manually adjusting screen display

quality.

DVI Cables included

DVI-I Cable (Analog) to VGA Connector (15 pin)

DVI-D Cable (Digital only) to Digital Connector

8English

Part Number: 157254-001- Writer: Marianne Silvetti - Saved by: MSilvetti

Saved date: 10/12/99 6:16 PM

File Path: P:\Docs\Monitors\Nina

Adding a Compaq Powered USB Hub

The monitor base is designed to house an optional Compaq Powered

USB hub. The Compaq Powered USB hub is not included with the

monitor. It is sold separately. For information on purchasing the

Compaq Powered USB hub (part no. 138638-xxx), call your Compaq

authorized dealer, seller, or reseller. To locate a reseller near you, call

Compaq at 1-800-AT-COMPAQ or visit the Compaq web site at

http://www.compaq.com .

To remove the housing cap from the base:

1. Press down on the top of the cap.

2. Pull the cap outwards to remove it.

The following are required to operate the Compaq Powered USB hub:

■ Your computer must be fitted with a USB port.

■ Your computer must have Microsoft Windows 95 OSR2.1 or

later, or Microsoft Windows 98 as the operating system.

USB connectors are used to connect USB-compatible Plug and Play

devices such as a keyboard, mouse, or joystick to the USB hub using

Plug and Play install procedures. Plug and Play install procedures

consist of plugging in the USB device while the system is turned on

and using it without reconfiguring your computer.

Indice

Altri manuali Compaq Monitor

Compaq

Compaq P700 Manuale utente

Compaq

Compaq P1100 Manuale utente

Compaq

Compaq V900 Istruzioni utente

Compaq

Compaq CRT Monitor s7500 Manuale utente

Compaq

Compaq 5017 - TFT - 15" LCD Monitor Manuale utente

Compaq

Compaq V1000 Manuale utente

Compaq

Compaq MV5500 Istruzioni utente

Compaq

Compaq Flat Panel Monitor tft5017m Manuale utente

Compaq

Compaq S500 Manuale utente

Compaq

Compaq 378901-008 - FP 700 - 15" LCD Monitor Istruzioni per l'installazione

Compaq

Compaq 8000 - Elite Convertible Minitower PC Manuale utente

Compaq

Compaq P1220 Istruzioni utente

Compaq

Compaq Compaq M720 Manuale utente

Compaq

Compaq Compaq S720 Manuale utente

Compaq

Compaq TFT8030 Manuale utente

Compaq

Compaq 1024 Manuale utente

Compaq

Compaq S900 Istruzioni utente

Compaq

Compaq V1100 Manuale utente

Compaq

Compaq Q2009 - Compaq - Widescreen LCD Monitor Come usare

Compaq

Compaq V55 Manuale utente

Compaq

Compaq P900 Manuale utente

Compaq

Compaq WF1907 - Compaq 19" LCD Monitor Come usare

Compaq

Compaq CV7500 Manuale utente

Compaq

Compaq 5017 - TFT - 15" LCD Monitor Manuale utente

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione