Conair Infinity Hair Designer BC173 Guida utente

Instruction & Styling Guide

Model BC173

STRAIGHTENS •SHINES• CONTROLS FRIZZ•HEALTHY HAIR •VOLUME

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be

followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

KEEP AWAY FROM WATER

DANGER – Any hot air styler is electrically live even when the switch is off. To reduce the risk of death or injury by

electric shock:

1. Always unplug appliance immediately after using.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can fall or be pulled into a tub or sink.

4. Do not place in, or drop into, water or other liquid.

5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

WARNING – To reduce the risk of burns, electrocution, ﬁre, or injury to persons:

1. This appliance should never be left unattended when plugged in.

2. This appliance should not be used by, on, or near children or by individuals with certain disabilities.

3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommend-

ed by the manufacturer.

4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been

dropped, damaged, or dropped into water. Return the appliance to a Conair service center for

examination and repair.

5. Keep the cord away from heated surfaces. Do not pull, twist, or wrap line cord around appliance, even

during storage.

6. Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air

openings may be blocked. Keep the air openings free of lint, hair, and the like.

7. Never use while sleeping.

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

8. Never drop or insert any object into any opening.

9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being

administered.

10. Do not use an extension cord to operate hot air styler.

11. Do not direct hot air toward eyes or other heat-sensitive areas.

12. Hot air styler will be hot during use. Allow to cool before handling.

13. Do not place appliance on any surface while it is operating.

14. While using the appliance, keep your hair out of it. Keep your hair away from the air inlets.

15. Do not use with voltage converter.

SAVE THESE INSTRUCTIONS

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

OPERATING INSTRUCTIONS

This appliance is intended for household use only. Use on Alternating Current (60 hertz) only. Standard hot air stylers

are designed to operate at 110 to 125 volts A.C.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will ﬁt in a

polarized outlet only one way. If the plug does not ﬁt fully in the outlet, reverse the plug. If it still does not ﬁt, contact a

qualiﬁed electrician. Do not attempt to defeat this safety feature.

IMPORTANT –

700 WATT OPERATING GUIDE

Use of this hot air styler on the same circuit or fuse with other electrical products or appliances may trip the circuit.

NEVER replace the fuse with one rated higher than the capacity of the circuit. Doing so could result in an

electrical fire.

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

CHECK ALCI SAFETY FEATURE EVERY TIME YOU USE APPLIANCE.

This appliance is equipped with an Appliance Leakage Circuit Interrupter (ALCI), a safety

feature that renders it inoperable under some abnormal conditions, such as immersion in

water. To make sure the ALCI is functioning properly, perform the following test. The purpose

of this test is to allow you to make sure the water sensing system (ALCI) is working.

1. Plug in the appliance and press test button on plug (see appropriate diagram).

2. The appliance will stop working. There will be an audible click and reset button will pop out.

3. To reset ALCI with a reset button, unit should be unplugged. Then push reset button in, and

reinsert plug into outlet.

4. If ALCI is not functioning properly, return appliance to nearest service center.

5. It is important that if immersion occurs, this unit be brought to a service center. Do not try

to reset.

Reset

Test

Reset

Test

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

6. Be sure to repeat test every time you use the unit to conﬁrm ALCI is operational. Should the appliance go off and

the reset button pop up during use, this could indicate a malfunction in the unit. Remove plug from outlet and allow

the appliance to cool. Reinsert plug into outlet. The appliance should then function normally. If not, return to an

authorized Conair Service Center for evaluation and repair.

SUPER STYLING GUIDE

Your best looks begin with a good haircut that’s well maintained. Always treat hair right with superior quality

shampoos, conditioners, and ﬁnishing products.

The Inﬁniti

™

Hair Designer by Conair®is an innovative, revolutionary hot air styler that has effectively eliminated the

need for a hair brush and brought salon quality results to your home.

DRYING/STRAIGHTENING BASICS

1. Shampoo and condition hair with products of your choice. Rinse thoroughly. Towel-dry hair to remove excess moisture.

Select a small section of hair and pass the hot air styler through it to smooth out curls and help control frizz. Start at a

lower setting and direct hot air through a section of hair at a time. Direct air ﬂow at hair, not scalp. Clouds of negatively

charged ions will help to reduce static electricity, control frizzy ﬂyaways and contribute to your hair’s shine.

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

2. Keep hot air styler's air intake vents unobstructed and free from hair while drying.

3. To avoid overdrying, do not concentrate heat on any one section for any extended length of time.

Keep hot air styler moving as you style.

4. For quick touchups, dampen hair with a mist of water before styling with the hot air styler.

5. When using your hot air styler to create ﬂips at ends, dry and straighten hair almost completely on

the high temperature setting, then ﬁnish styling on cool setting to close hair shaft and lock in style.

The professional Inﬁniti

™

Hair Designer by Conair®is very effective, even at lower temperatures, and

helps to give healthier-looking, shiny, more manageable hair with maximum styling control.

HOT AIR STYLER FEATURES:

1. Exceptional Power

Equipped with a powerful motor (700 watts) this hot air styler gives penetrating and quick styling results.

2. Tourmaline CeramicTM Technology

Ion output helps smooth the cuticle layer creating silky, shiny hair.

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

3. Ionic Technology

Controls static electricity and also enhances the effectiveness of leave-in hair care. It facilitates your styling and

optimizes your hair’s shine and softness. It will be easier to style and shape your hair.

4. Unique Built-in Tourmaline CeramicTM straightening head with tension control

One-easy-step straightening process. Dry, detangle, straighten and shine hair for professional results.

5. 1 Speed/3 Heat Settings

Low Setting: this position combines ideal air ﬂow and temperature setting for shaping ﬁner, damaged or

treated hair.

High Setting: combines ideal airﬂow with higher temperature, especially recommended for pre-drying and also for

styling and straightening thick hair.

6. The Cool Setting

Using the cool setting at the end of straightening sets the style for a long-lasting effect.

KNOW EVERYTHING ABOUT THE INFINITI™HAIR DESIGNER BY CONAIR®

GET TO KNOW YOUR WET•DRY HOT AIR STYLER

DRY, DETANGLE, STRAIGHTEN AND SHINE IN ONE STEP

Detangling Combs

and Flocked Disks

Professional Length

Swivel Cord

Tourmaline Ceramic

™

Straightening Plates

ION "On" LED Light

4-Position

Tension Control

System:

1. Wavy Hair

2. Curly Hair

3. Very Curly Hair

4. Thick Hair

1 Speed/

3 Heat Settings

700 watts

Detangling Combs

and Flocked Disks

Ionic Technology

Indice

Lingue:

Altri manuali Conair Ferro da stiro

Conair

Conair Satin Finish CS26HCSC Guida utente

Conair

Conair CD203RC Guida utente

Conair

Conair CS28 Guida utente

Conair

Conair TC700 Manuale utente

Conair

Conair Shiny Styles CS9ACS Guida utente

Conair

Conair Instant Heat CD96JCS Guida utente

Conair

Conair Instant Heat CS19JCS Manuale utente

Conair

Conair CS224 Manuale utente

Conair

Conair Straightening Iron TS20S Manuale

Conair

Conair S1RCSC Guida utente

Conair

Conair miniPRO CS56 Manuale utente

Conair

Conair Instant Heat CHV14IX Manuale utente

Conair

Conair CS53CS Guida utente

Conair

Conair Ceramic CD106 Guida utente

Conair

Conair HS10C Manuale utente

Conair

Conair Travel Smart TS63RC Manuale

Conair

Conair Dry N' Straight CS27FCS Guida utente

Conair

Conair CS86 Guida utente

Conair

Conair Mini You Wave S8XRC Guida utente

Conair

Conair Straightening Iron s3cs Guida utente

Conair

Conair CD86NCSC Guida utente

Conair

Conair SS9 infiniti nano silver Guida utente

Conair

Conair miniPRO SS2C Guida utente

Conair

Conair RP150-H Manuale utente

Manuali Ferro da stiro popolari di altre marche

Vitek

Vitek VT-2505 Manuale utente

Morphy Richards

Morphy Richards IB22063 Scheda informativa del prodotto

TZS First AUSTRIA

TZS First AUSTRIA Ida FA-5670-3 Manuale utente

izzy

izzy LN-112 Manuale utente

Vitek

Vitek VT-2310 Manuale utente

Okoia

Okoia HS23 Manuale utente

Arzum

Arzum TRENDCARE AR 5042 Manuale utente

SOLAC

SOLAC PP7251 Manuale utente

VS Sassoon

VS Sassoon VSLE330A Manuale utente

Philips

Philips HP8339 Manuale utente

Philips

Philips HP4666 Manuale utente

Vitek

Vitek VT-8291 Manuale utente

VS Sassoon

VS Sassoon miniPRO Wave Envy Manuale utente

Arzum

Arzum SUPERSTAR TOUCH Manuale utente

Remington

Remington S2880ZBA Manuale utente

cecotec

cecotec Bamba RitualCare 900 Wet&Dry Max Manuale utente

Philips

Philips HPS950 Manuale utente

Andis

Andis Gold CSI-1E Manuale utente