Connected Inventions Detectify R3.2 Manuale utente
www.connectedinventions.com
User Manual
Connected Detectify
R3.2
Detectify
Connected Detectify is a motion detector for indoor
purposes, based on a passive infrared technology
sensor with a detection area of up to 5 meters.
Last updated July 2020
!
Contents
3
3
5
Using this manual
Read me first
About the device
Function
Assembling and Installation
Uplink: Payload description
Downlink
Downlink: Payload Description
Troubleshooting
Technical Specification
7
9
12
14
15
17
18
2
Thank you for choosing this Connected
Inventions device. This device will provide you
high-quality IoT with Connected Inventions’
exceptional technology and high standards.
This manual has been specially designed to
guide you through the functions and features
of your device.
Using this manual
• Before using your device, read the entire
manual and all safety instructions to
ensure safe and proper use.
• The descriptions in this manual are based
on the default settings of your device.
• The images used in this manual may differ
from the actual product.
• The contents of this manual may differ
from software provided by service
providers or carriers, and are subject to
change without prior notice.
• Access the Connected Inventions website
(www.connectedinventions.com) for the
latest version of the manual.
• Available features and additional services
may vary by service provider.
Read me first
3
.
!
• Applications on this device may perform
differently from comparable applications
and may not include all functions available
(by ie. downlink messaging features)
• Connected Inventions is not liable for
performance issues caused by third-party
applications or improper installation.
• Please keep this manual for future
reference.
• In case of malfunction, deliver the device to
the supplier. Do not open the cover.
• Do not remove packing material and do not
repack the device unless necessary.
Contact the shipping agent before
transportation. Inside the device there is a
battery which contains approximately 1.4 g
of lithium.
• Return the device to a disposal station
which collects electronics waste and
batteries.
• Protect the device from moisture, water,
and dirt.
Malfunction
Transportation
Disposal
Operation
4
!
Connected Inventions Detectify is an
industry grade passive infrared (PIR)
sensor for movement detection indoors.
The device utilises ultra low power two
way radio communications with Sigfox
network technology. The device is battery
powered and with normal usage running
default settings, the batteries will last up
to five years. There are two different
versions of the device: 90 degree wide
detection angle version (see picture
below) for sensing motion in rooms and
30 degree narrow detection angle version
(see picture below) for more restricted
areas like work desks. The device can be
used for alerting immediately about
movement in space as well as counting
movements periodically and cumulatively.
About
5
90 degree wide detection
angle for sensing motion in
rooms.
30 degree narrow detection
angle for more restricted
areas.
6
Detectify R3.2 has two modes: Activity mode (AM) and Inactivity mode (IM). In Inactivity
mode, the device waits to detect movement. Once movement is detected, the mode is
changed to Activity Mode, Activity Counter and Cumulative Activity Counter are incremented
and message is sent immediately. While in Activity mode, the device counts 3 second time
slots where movement is happening and increments counters accordingly. After Activity
Reporting Period (ARP) has been reached, the device will send a message with incremented
counters and starts a new Activity Reporting Period. Still in Activity Mode, in case no
movement was detected until Inactivity Detection period (IDP) was reached, the last
movement counters are sent and the device goes to Inactivity mode. Once Inactivity
Reporting Period (IRP) has passed without any movement, the device sends periodical
inactivity message.
Function
Inactivity Mode
Activity Mode
Inactivity
Reporting
Period
Inactivity Detection
Period
Activity
Activity
Reporting
Period
7
!
8
State transition example where inactivity report has activity count = 0.
State transition example where inactivity report has activity count > 0.
!
9
Assembly & Installation
Save the identifier and the key
of the device.
The identifier and the PAC key
are on the label on the bottom
of the device. You can also
read the identifier and the PAC
key using the QR code. The
picture below is an example of
a label.
Use a small screwdriver to
slide the power switch to “I”
position. Please note that the
switch should slide relatively
effortlessly.
1
2
Do not use excess force to
slide the switch!
!
On
!
10
• Install the device to a suitable
position to detect movement.
Maximum detection distance is
approximately five meters.
• The detection angle of the device
is ab out 30 or 90 degre es
depending on the version.
• You can use direct screw plate
(included) or angle joint support
(included) for attaching the device
to surface.
Please note! Avoid placing
device closer than 15cm from
any metal or magnetic object,
electric cables, electric devices
or selective glass as this will
dramatically reduce radio
performance as well as battery
life of the device.
!
Indice
