Connection SLI 2.2 Manuale utente
OWNER’S MANUAL
SLI 2.2 - SLI 4.2
connection.eu
Manuale SLI 2/ SLI 4_2019.indd 1 22/05/19 15:19
Manuale SLI 2/ SLI 4_2019.indd 2 22/05/19 15:19
3
WARNING
•Before you start your installation, make sure you carefully read and understand all instructions.
Disregarding them might cause accidental harms or damage your devices.
•The vehicle electric system must have 12 VDC voltage with negative to ground. Make sure
yourcarhasitinordertoavoidanydamagestoyouramplierandtothevehicle.
•Install the device in the vehicle parts where temperature is between 0° C (32° F) and 55° C (131° F).
•Make sure the location you chose for the components does not affect the correct functioning
of the vehicle mechanical and electric devices.
•Do not run the cables or install the device next to electronic gearcases.
•Always wear protective eyewear when using tools that may generate splinters.
•When installation is over, and before plugging the main power supply fuse, check the system
wiring and make sure all connections were done in the right way.
•Safetymustbeattherstplacewhiledriving.Listeningvolumemustnevercovernoisecomingfrom
the outside and from the vehicle, in order for you to be able to promptly face emergency situation.
•AlwaysinsulatetheconnectionbetweentheSLIandtheOEMheadunit/OEMamplierto
avoid damage them.
•AlwaysinsulatetheconnectionbetweentheSLIandthe+12Vpowersupplysystem(battery).
•Alwaysfuse+12VSLIcable(RED)with1Afusetoavoidanydamagetothevehicleelectrical
systemandoreventofre.
Elettromediawillnotbeliableforthedirectorindirectdamagesduetoawronguseorawrong
connection of the device.
Manuale SLI 2/ SLI 4_2019.indd 3 22/05/19 15:19
4
PACKAGING CONTENTS
SLI 2.2 SLI 4.2
x 4
x 4
Manuale SLI 2/ SLI 4_2019.indd 4 22/05/19 15:19
5
INSTALLATION - FIXING - SIZE
D
H
W
CLICK
SLI 2.2 -SLI 4.2
W H D
SLI 2.2 61
(2.4)
82
(3.2)
28
(1.1)
mm
(in.)
SLI 4.2 61
(2.4)
102
(4)
28
(1.1)
mm
(in.)
Manuale SLI 2/ SLI 4_2019.indd 5 22/05/19 15:19
6
CONNECTIONS
SLI 2.2
*ConversionnotoperatedforRearinputchannelsonSLI2.2,onlyUSSandARTfunctionisactiveontheseinputs.
UNIVERSAL SPEAKERS
SIMULATOR circuit, simulates
theloadoftheOEMspeakers
onthe4Front+Rearinput
channels, for a complete
compatibilitywithOEM
Headunit/OEMAmplier.
SLI 2.2 CABLE OUTPUT VIEW
RCA
OUT
GND (Black)
NC
IN RR- (Purple/Black)
IN RL- (Green/Black)
IN FR- (Grey/Black)
IN FL- (White/Black)
NC
NC
OUT FR- (Grey/Black)
OUT FL- (White/Black)
(Red) +12V
(Blue) REM OUT
(Purple) IN RR+
(Green) IN RL+
(Grey) IN FR+
(White) IN FL+
NC
NC
(Grey) OUT FR+
(White) OUT FL+
+12V
GND
RCA
Front Right
Out
RCA
Front Left
Out
RemOut
INRR+
INRL+
INFR+
INFL+
INRR-
INRL-
INFR-
INFL-
Rear
Right
Front
Right
Rear
Left
Front
Left
Manuale SLI 2/ SLI 4_2019.indd 6 22/05/19 15:19
7
CONNECTIONS
SLI 4.2
UNIVERSAL SPEAKERS
SIMULATOR circuit, simulates
theloadoftheOEMspeakers
onthe4Front+Rearinput
channels, for a complete
compatibilitywithOEM
Headunit/OEMAmplier.
RCA
OUT
+12V
GND
RCA
Front Right
Out
RCA
Rear Right
Out
RCA
Front Left
Out
RCA
Rear Left
Out
RemOut
INRR+
INRL+
INFR+
INFL+
INRR-
INRL-
INFR-
INFL-
Rear
Right
Front
Right
Rear
Left
Front
Left
SLI 4.2 CABLE OUTPUT VIEW
GND (Black)
NC
IN RR- (Purple/Black)
IN RL- (Green/Black)
IN FR- (Grey/Black)
IN FL- (White/Black)
OUT RR- (Purple/Black)
OUT RL- (Green/Black)
OUT FR- (Grey/Black)
OUT FL- (White/Black)
(Red) +12V
(Blue) REM OUT
(Purple) IN RR+
(Green) IN RL+
(Grey) IN FR+
(White) IN FL+
(Purple) OUT RR+
(Green) OUT RL+
(Grey) OUT FR+
(White) OUT FL+
Manuale SLI 2/ SLI 4_2019.indd 7 22/05/19 15:19
8
CONNECTIONS: SLI 2.2 with OEM Headunit (without ART™function)
DSR: DOUBLESTEP-DOWNRATIO,allowscorrectlevelinterfacingwithOEMHeadunitorOEMAmplierbyswitchselection.
OEM Headunit
+ Batt
Fuse
IN (high level)
OUT (low level)
Remote
High Power
(OEM AMP)
Low Power
(OEM SOURCE)
OFF
ON
Manuale SLI 2/ SLI 4_2019.indd 8 22/05/19 15:19
9
CONNECTIONS: SLI 2.2 with OEM Headunit (with ART™function)
DSR: DOUBLESTEP-DOWNRATIO,allowscorrectlevelinterfacingwithOEMHeadunitorOEMAmplierbyswitchselection.
ART™:AUTOMATICREMOTETURN-ON/OFFfunction,generatesa12VremoteoutputwhentheOEMHeadunit/AmplieristurnedON/OFF
(availableonlywhenSLIispowered).
*ConversionnotoperatedforRearinputchannelsonSLI2.2,onlyUSSandARTfunctionisactiveontheseinputs.
**IncountrieswherethelegislationonelectromagneticcompatibilityisnotmandatoryunderECE/UNRegulationno.10/5.
High Power
(OEM AMP)
Low Power
(OEM SOURCE)
OFF
ON
OEM Headunit
+ Batt
+ Batt
Fuse
IN (high level) OUT (low level)
RED
+12 V
GND
Black
REM OUT
Blue
Remote
ARTTM FUNCTION
Manuale SLI 2/ SLI 4_2019.indd 9 22/05/19 15:19
10
CONNECTIONS: SLI 4.2 with OEM Headunit (without ART™function)
OEM Headunit
+ Batt
Fuse
IN (high level)
OUT (low level)
Remote
Front
Front
Rear
Rear
OFF
ON
High Power
(OEM AMP)
Low Power
(OEM SOURCE)
DSR: DOUBLESTEP-DOWNRATIO,allowscorrectlevelinterfacingwithOEMHeadunitorOEMAmplierbyswitchselection.
Manuale SLI 2/ SLI 4_2019.indd 10 22/05/19 15:19
Questo manuale è adatto per i seguenti modelli
1
Indice
