Manual to ConnectScale Digital Fish Scale
Model No.：CS-55-1
Note: The data might be a little different from the sample, please kindly inform us for
updating and modifying if the test result different from this manual.
Basic:
1. Capacity/ Division: 1) 25KG(26KG MAX)/10g，2) 50KG(51KG MAX)/10g
2. Division: KG：0.01kg，LB：0.01 LB，OZ：0.1 OZ
3. Weighing Unit ：KG/ LB/ OZ/ ℉/ ℃with key to make switch
4. Tolerance：1/5000
5. Hold ：Auto hold, with “HOLD”on screen
6. Screen：OCS-26-LCD，5unit, size mm
7. Over load indication：when weight over 1kg than capacity, will indicate ”O-Ld”
8. Low power indicate：the screen shows “Lo” when power lower than 1V(±0.2V)
9. Auto turn off：60S
10. back light ：yes，15s no operating after turn on, the back light auto shut off
11. Buzzer ：yes.
12. Function of keys：[ON/OFF]---turn on/ turn off；[UNIT]---unit switch；
[RESET]--- clear.
13. Temperature test：0~60℃/1℃， 10~40℃±2℃(after calibration) 32~122℉/1
℉(℉=1.8*℃+32）
14. ON/OFF status：turn on shows“HELLO”，turn off shows“bYE”
15. Factory calibration：1 o’clock，25kg
16. Data transfer：Bluetooth 4.0 ，UART，wave 9600，8，1（communication
commission），single sending data
17. Data sending：sclae forward basic kg and basic℃data
18. Data receiving ：not available
19. Distance：wireless bluetooth reach distance at idea condision≥20 m, with wall
≥5 m
20. Working condition：0~40℃， RH< 90%
21. Power：DC3V （2 pcs no.7 aa battery）current；working current（not
including back light) about 5.9mA，total current（with back light）约 8.8mA；shut off
current 10~20uA（with 3V power supply)
Operation
1. Weighing：put battery in，the scale sounds “di”，screen shows “HELLO”then
shows“0.00kg ”. Hang weight on the hook, indicate weight change. The screen
shows weight changed, when stabled, screen show“HOLD”and sounds“di”. Then
this weight will be sent。After hold, press [ON/OFF]could unhold，press key
[RESET]could clear the weight and restart weighing. No weight status，press key
[ON/OFF] when shows“bYE”turn off，meanwhile sending turn off code
2. Working status，press key [UNIT] can switch unit，unit could be：KGÆ LBÆ
OZÆ ℉Æ ℃；when choose temperature，will send data（℃）
3. Press[ON/OFF]after set battery, auto choose hold mode. After turn on, press key
[RESET] for 3S until the screen shows“H-oFF”, means Hold function off，press
