Consilium Salwico Cargo Manuale utente

Fire Detection System - Salwico Cargo

Addressable

User Guide

Consilium Marine & Safety AB

+46 31 710 77 00

For service or spares contact your local Consilium office. Contact

information can be found at:

www.consiliumsafety.com

The contents of this document are subject to revision without notice

due to continued progress in methodology, design and manufacturing.

Consilium assumes no legal responsibility for any error or damage

resulting from the usage of this document.



April 2023

File name 5100332-01_Salwico Cargo Addressable_User Guide_M_EN_2023_AG

Document no. 5100332-01

Table of contents

1 Introduction....................................................................................... 1

1.1 About this Manual ............................................................................ 1

1.2 Approvals........................................................................................... 2

1.3 Symbols used in the manual ............................................................. 2

2 Official service and maintenance guidelines ................................... 3

3 Fire Detection System ....................................................................... 7

3.1 System Description............................................................................ 7

3.2 System Block Diagram...................................................................... 7

4 Control Panels................................................................................... 9

4.1 Control Panel M 4.3.......................................................................... 9

4.1.1 General........................................................................................... 9

4.1.2 Description of Keys and Indicators................................................ 9

4.1.3 Guide to the Menu System............................................................. 13

4.2 Repeater M 4.3 .................................................................................. 21

4.2.1 General........................................................................................... 21

4.2.2 Description of Keys and Indicators................................................ 22

5 Operations ......................................................................................... 25

5.1 Access Levels ..................................................................................... 25

5.2 Login.................................................................................................. 26

5.3 Pre-Alarm.......................................................................................... 26

5.4 Fire Alarm......................................................................................... 27

5.4.1 Information Displayed when “Fire” is Flashing ............................ 27

5.4.2 Mute a Fire Alarm.......................................................................... 28

5.4.3 Reset a Fire Alarm ......................................................................... 28

5.4.4 Several Alarms............................................................................... 28

5.4.5 Type of Fire Alarms from Conventional Zones............................. 28

5.5 Fault Alarm....................................................................................... 28

5.5.1 Information Displayed when “Fault” is Flashing .......................... 28

5.5.2 Mute a Fault ................................................................................... 30

5.5.3 Reset a Fault................................................................................... 30

5.5.4 Reset a Fault from the Fault List.................................................... 30

5.5.5 Reset All Faults.............................................................................. 30

5.5.6 Fault Messages............................................................................... 30

Table of contents

5.5.7 Warnings ........................................................................................ 31

5.6 Disablements ..................................................................................... 31

5.6.1 About Disablements....................................................................... 31

5.6.2 Available Types of Disablements................................................... 32

5.6.3 Acknowledgement of a New Disablement .................................... 33

5.6.4 Disabling Zones ............................................................................. 33

5.6.5 Disabling Addressable Detectors & Manual Call Points............... 34

5.6.6 Disabling Alarm Devices............................................................... 34

5.6.7 Old Disablements........................................................................... 34

5.6.8 Alarm Delay................................................................................... 34

5.6.9 Disabling External Control Groups ............................................... 35

5.6.10 Disabling an Alarm Transfer Output ............................................. 35

5.7 Reconnecting..................................................................................... 36

5.7.1 Reconnecting Disabled Items ........................................................ 36

5.7.2 Reconnecting Periodic Disablements ............................................ 36

5.7.3 Reconnecting Activated Alarm Delays.......................................... 36

5.7.4 Reconnecting Disabled Alarm Delays ........................................... 36

5.7.5 Remove All Disablements ............................................................. 37

5.8 Service Menu..................................................................................... 37

5.8.1 About the Service Menu ................................................................ 37

5.8.2 Save the System Log to a USB Memory Stick .............................. 38

5.8.3 How to report a fault ...................................................................... 38

6 Testing................................................................................................ 39

6.1 About Testing..................................................................................... 39

6.2 Test mode overview............................................................................ 39

6.3 Testing a Fire-detecting Zone........................................................... 40

6.4 Recommended Test Equipment......................................................... 40

6.5 Reset Test Mode................................................................................. 41

6.6 Test the control panel display ........................................................... 41

7 Appendix - Fault Code List............................................................... 43

7.1 Fault Code List.................................................................................. 43

8 Appendix - Definitions and Abbreviations....................................... 61

8.1 Definitions and abbreviations........................................................... 62

9 Quick Guide....................................................................................... 67

Table of contents

10 Revision history ................................................................................. 69

Index.................................................................................................. 70

Table of contents

User Guide 1Introduction

5100332-01_Salwico Cargo Addressable_User Guide_M_EN_2023_AG 1

1 Introduction

1.1 About this Manual

This User Guide is intended for personnel using the Fire detection system and

provides basic understanding how to operate the system.

NOTE!

This manual has been revised based on system version 1.12.x.

The chapter Fire Detection System gives general information about the system.

The chapter Control Panels describes the function of the Control panel and the

Repeater in the Fire detection system.

The chapter Operations describes how to operate the Fire detection system.

The chapter Testing provides brief instructions on how to connect and test the

system (detailed information is found in the Service & Maintenance manual).

The Fault Code List in the Appendix lists the different fault codes.

Figure 1. Salwico Cargo Fire Detection System, an example.

1Introduction User Guide

25100332-01_Salwico Cargo Addressable_User Guide_M_EN_2023_AG

1.2 Approvals

1.3 Symbols used in the manual

DANGER!

Risk of serious or fatal injury to the user, and/or severe damage to the product, if the

instructions are not followed.

WARNING!

Risk of personal injury and/or damage to the product if the instructions are not

followed.

CAUTION!

Risk of minor or moderate personal injury. Risk of equipment damage, loss of data,

extra work, or unexpected results, if the instructions are not followed.

NOTE!

Note symbols alert you to important facts and conditions.

Hint!

Hint symbols direct you to specific instructions, such as where to find additional

information and tell you how to perform a certain operation in an easier way.

User Guide 2Official service and maintenance guidelines

5100332-01_Salwico Cargo Addressable_User Guide_M_EN_2023_AG 3

2 Official service and maintenance

guidelines

•This is an essential safety system which needs to be maintained to the highest

standards.

•It is strongly recommended that annual maintenance is carried out by

manufacturer certified service technicians.

•By following below manufacturer’s service & maintenance guidelines, relevant

actions are being taken to optimize the functionality and lifetime of the safety

system and its individual building blocks.

•All service carried out by manufacturer include update to onboard official

documentation and certifications which can be submitted to any

approval/inspection parties attending the ship.

Consilium is known for high quality products, still all manufactured goods have a

lifespan. Regardless of quality and durability, a safety system requires maintenance

on a regular basis to function as intended and to prolong its lifetime.

Consilium original spare parts are compulsory with any Consilium safety system.

Original spare parts are configured and tested for use with specific safety systems.

Using Consilium original spare parts ensures best possible conditions for the safety

system to operate at optimal performance while not voiding compliance with

regulations, standards, or manufacturer warranty.

Official service and maintenance guidelines are Consilium’s recommendations for

preventive service and maintenance; however, regulations or owner requirements

may require higher frequency and/or more extensive inspection and/or more

extensive onboard vessel spare parts safety stock.

Maintenance for Fire Detection System Central Unit

Service interval, no. of months

Type of maintenance 1 3 6 12 24 36 60

Check detector loop communication in each

detector loop (where addressable system)

Test all public address systems and general

alarm systems

Test control panel display x

Check battery performance, including load

test, replace if required

Battery replacement x

Check relays, including but not limited to

control of: 3rd party product relays,

relays/signal path to emergency shutdown

system

2Official service and maintenance guidelines User Guide

45100332-01_Salwico Cargo Addressable_User Guide_M_EN_2023_AG

Type of maintenance 1 3 6 12 24 36 60

Check software configuration and firmware

version e.g. safety review of configuration,

clarity on detector localization etc.

Check link to parent system, verify

communication to connected systems

Check automatic activation of fire detection

system to fire extinguishing system

Inspection of emergency switchover unit x

Maintenance for detectors and call points

Service interval, no. of months

Type of maintenance 1 3 6 12 24 36 60

Check functionality and line of sight of all

flame detectors

Check functionality of all smoke detectors x

Check functionality of all heat detectors x

Check functionality of all combined

smoke/heat detectors

Check all manual call points (push buttons) x

Check potentially tampered or obstructed

detectors (ocular)

Check contamination level in smoke and

smoke/heat detectors and location

Contamination progression analysis, i.e.

smoke and smoke/heat detector

contamination progress since last control

Maintenance for other

Service interval, no. of months

Type of maintenance 1 3 6 12 24 36 60

Check spare part safety stock inventory x

Review and confirm the different spaces on

the vessel are used as specified when the

system was installed. E.g. check for empty

spaces now used as storage areas or laundry

facilities. Changed use of space by result

require adjustment to safety system(s) as per

applicable standards

Ensure vessel’s maintenance plan is correct

and up-to-date with manufacturer’s

guidelines

Maintain and update service history log with

date, person, scope and result of conducted

maintenance

Indice

Altri manuali Consilium Sensore di sicurezza

Consilium

Consilium CFD5000 T/CM2.2 Guida

Manuali Sensore di sicurezza popolari di altre marche

THORLABS

THORLABS PDA10JT Manuale utente

Waeco

Waeco UV-DETECT Manuale utente

Intermatic

Intermatic IOS-DSIMF Manuale utente

urmet domus

urmet domus 1083 Manuale utente

Siemens

Siemens AZL66 Series Manuale utente

BTI

BTI Profiline Multi Finder Manuale utente

Challenger

Challenger SL01 Manuale utente

DMP Electronics

DMP Electronics 1122INT Manuale utente

Rielta

Rielta Ladoga MK-RK Manuale utente

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuale utente

Bosch

Bosch DS835 Manuale utente

DBI SALA

DBI SALA EZ Stop Manuale dell'operatore

Lamptime

Lamptime ST05C Manuale utente

Ubiquiti

Ubiquiti MFI-MSC Manuale utente

Subsite

Subsite 910R Istruzioni per l'installazione

Satel

Satel OPAL Pro Manuale utente

Aleph

Aleph XC-1XTEU Manuale utente

Pima

Pima LARIS QUAD Manuale utente