Contech CCS Series Manuale utente

ELECTRONIC WEIGHING SCALE

CCS - SERIES

OPERATING MANUAL

CONTENTS

1. Introduction

2. Crane scale sketch

10.

11.

Installation

Operation of the Scale

Print Option

Bi-directional RS-232 interface

Storage of Weights in Memory

Auto Power Off

Piece Counting Mode

Set Point Facility

Operating in Tare / Zero Mode

Set up Function

INTRODUCTION

We thank you for choosing series weighing scale for your

weighing needs. These scales use some of the latest and most advanced

computing powers to give maximum flexibility and utility to the user.

CCS

Features:

weighing unit gram / kilo gram.

Feather touch membrane keyboard.

Optional Battery backup facility.

Piece counting facility, up to 25 different types.

Storage of weights in memory and printing, up to 100 weights.

Power saving mode.

Bi-directional RS232 interface to interface with computers and printers.

Selectable baud rate.

Set point facility up to 3 limits.

Auto Power off.

Peak Hold facility.

Date and time facility.

Multiple Print options with Sr. no., Date, Time and weight in Horizontal /

Vertical Mode.

Automatic zero tracking.

User selectable Tare/Zero mode option with Net/gross facility for

minimum use.

REAR VIEWREAR VIEW

MODEMODE

HOLD

ENT.

HOLD

TARE

PRN

StableStable

Power

255

180

FRONT VIEW

R.H SIDE VIEWR.H SIDE VIEW

CRANE SCALE SKETCH

INSTALLATION

1. Unpacking:

2. Electrical Requirements:

3. Environmental Requirements:

4. Start Up:

Unpack the balance. Save the packing container for future use.

The balance requires very stable power. It works on 230V AC supply

with PROPER EARTHING. The power outlet used for the balance should not

be shared with any other devices which draws current in inconsistent manner

likeAir Conditioner or Refrigerator etc.

For best results, the balance should be placed on a level surface which

is free from drafts. It should not be exposed to direct sunlight or radiated heat.

Table used for balance should be sturdy and should not transmit vibration from

other equipments and free from the movement of people. No vibration

producing equipment should be operated on the same platform as balance.

Power is supplied to the scale through a 3 core AC mains cord attached

to the scale. Insert the 3 pin plug of the power supply onto a proper mains

outlet. Switch on the balance using the switch on the scale.

Scale goes through self test and subsequently starts displaying weight.

Press key to display zero weight.

NOW THE SCALE IS READY FOR WEIGHING.

With battery backup option, there is a need to charge the battery regularly

to prevent loss of backup time. The scale can be switched off using the switch

provide on the scale. Do not switch off the main power to the scale even when the

scale is not in use. Keeping the mains power on will charge the battery and will be

ready to use when the input power fails.

NOTE:

TARE

OPERATION OF THE SCALE

1) FOR CHANGING WEIGHING UNITS.

Press key, the scale will show for some time

and will display the current weighing unit, say grams

Use or keys to change the mode and

Press key to select or

Press key to discard the changes.

Note that all weighing functions except the basic weighing unit need to be

enabled using functions.

Refer section on for more details.

2) FOR CHANGING DATE, TIME AND SERIAL NO.

Press key, the scale will show for some time

and will display the current weighing unit, say grams

Press key once again, the scale will show,

(If Fill option is on)

Press SETUP key once again, the scale will show

(

Press SETUP key once again, the scale will show

(If fill option is on and limit is set to SET-3)

If fill option is on and limit is set to SET-2 or above)

MODE

ENTER

SET

TARE

OPERATION OF THE SCALE

Press key once again, the scale will show

dt DD

where DD is the current date. Use and keys to change

date and press key to store the date.

Press key to skip date entry.

The scale will display

mn MM

where MM is the current month. Use and keys to change month

and press key to store the month.

Press key to skip month entry.

The scale will display

Yr YY

where YY is the current year. Use and keys to change year

and press key to store the year.

Press key to skip year entry.

The scale will display

hh.mm.ss

where hh.mm.ss is the current time.

ENTER

SET

ZERO

OPERATION OF THE SCALE

Press key to change the time or

key to quit time entry.

Press key, the scale will show,

hh xx

where xx is the hour. Use and key to change hour.

Press key to save. Press key to skip hour entry.

Press key, the scale will display

mm xx

where xx is the minute. Use and key to change minute.

Press key to save. Press key to skip minute entry.

Press key, the scale will display

SS xx

where xx is the second. Use and key to change second.

Press key to save.

Press key to skip second entry.

Press key, the scale will display

Sr xxxx

where xxxx is the serial no. Use and key to change serial number.

Press key to save.

Press key to skip serial number entry.

Press

ENTER

TARE

ZERO

PRINT OPTION

CT/CP series weighing scales can be attached to a serial printer for your printing

needs. Print out can be programmed to suit most of the printing requirements.

Note that the printer should have a serial port and baud rate of the scale and printer

should be same. 2 baud rates are available with the scale i.e. 2400 and 4800.

Printing option and patterns are controlled by parameters.

They are

There are 4 options

i) - Press key to start printing weight

and other details programmed as per (b), (c) and (d) below.

ii) - Printing is initiated when the weight kept on the pan

becomes stable.

iii) - All the displayed weights are printed along with

other details programmed as per (b), (c) and (d) below.

iv) - To print weights stored in memory along with details

programmed as per (b), (c) and (d) below.

Printer format. Five printout formats are available.

i) - Only weight.

ii) - Serial no and weight.

iii) - Serial no, Date and weight.

iv) - Serial no., Time and weight.

v) - Serial no., Date, Time and weight.

a) Print :

b) Pr.fmt. :

4 SETUP

PRINT OPTION

c) Print type (Horizontal or Vertical)

Details will be printed horizontally.

Sr.No. Date Time Weight

001 12.05.2002 13:25:00 4.545 kg

002 12.05.2002 13:27:05 4.234 kg

Details will be printed vertically in a slip form.

Sr.No. : 001 Date : 12.05.2002

Time : 13:25:00 Weight : 4.545 kg

d) : Title for printout.

i) TLE-YES - To enable title printing.

ii) TLE-no - To disable title printing.

Set the above parameters (a) to (d) to your requirements and effect printing.

These parameters are available in SETUP functions. Refer SETUP functions in

chapter.

P-TYPE:

i) – Horizontal

ii) – Vertical

TITLE

Indice

Altri manuali Contech Scala

Contech

Contech CT series Manuale utente

Manuali Scala popolari di altre marche

AWS

AWS ZEO-50 Manuale utente

Gima

Gima Glass Body Fat Analyzer Manuale elenco delle parti

Seca

Seca 374 Manuale utente

TEC

TEC TEC SL59 SERIES Manuale utente

Axis

Axis B/E Series Manuale utente

Alecto

Alecto ACW-40 Manuale utente

Rice Lake

Rice Lake MSI-4260 IS Manuale utente

IKA

IKA RCT basic safety control Manuale utente

ADE

ADE M20011 Manuale utente

Duronic

Duronic KS3000 Manuale utente

Digi

Digi SM-720 Manuale utente

Cardinal

Cardinal CS Series Manuale utente

Korona

Korona Kastella Manuale utente

A&D

A&D FC-50Ki Manuale utente

BDA

BDA CAMARGUE Manuale utente

Tanita

Tanita HD-357 Manuale utente

Leifheit

Leifheit 03173 Manuale utente

Lumme

Lumme LU-1340 Manuale utente