Contex SD One+ Manuale utente

June 2018

SD One+/MF Work Instruction

Tools required:

T10 screwdriver

T20 screwdriver

Prerequisite

Disconnect power from the scanner.

Re-positioning the Lid Sensor

1. Follow this procedure if the Lid

Sensor is not working correctly

and it is visibly not central in the

chassis.

2. Depress the latch levers at both

ends of the scanner.

NOTE: This work flow is exactly the same for the SD

One+ and the SD One MF, unless otherwise indicated.

3. Raise the CIS Bridge Unit.

4. Remove screws (3 x T20) in both

ends of the CIS bridge.

5. Open the CIS Bridge.

X

SD One + Technical Instructions 2

SD One+ Version

6. Remove 3 x T10 screws.

7. Lift the Controller Board up as

much as possible without

damaging any cables.

(NOTE: There is no need to remove any

cables for this procedure)

8. Remove the 2 x T10 screws from

the sensor bracket.

SD One MF version

1. Remove 2 x T10 screws.

2. Lift the Sensor Bracket out from

the chassis.

SD One + Technical Instructions 3

9. Lift the sensor bracket and check

for the correct.

10. The brackets should have the

sides parallel to each other.

11. Carefully press the side together

until they are parallel.

12. Do not press so hard so as to

distort the bracket too much.

13. When the bracket is correct, refit

into the chassis, and refit the 2 x

T10 screws.

Correct Incorrect

SD One + Technical Instructions 4

14. (SD One +) Refit the Controller

Board into the retaining clips,

and replace the 3 x T10 screws.

15. Close the CIS Bridge.

16. Refit the 3 x T20 screws at both

ends of the CIS Bridge.

17. Close the CIS Bridge down.

Altri manuali per SD One+

1

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Contex Scanner

Contex

Contex GX67D Manuale

Contex

Contex IQ 4400 Series Manuale utente

Contex

Contex IQ FLEX Come usare

Contex

Contex FLEX50i Manuale utente

Contex

Contex SD One MF Istruzioni per il montaggio

Contex

Contex HD iFLEX Manuale utente

Contex

Contex Wide Format Color Manuale

Contex

Contex HD Ultra X Series Guida

Contex

Contex FSS4300 Manuale

Contex

Contex SD One MF 44 Manuale utente

Contex

Contex XD2490 Manuale utente

Contex

Contex HD5450 Manuale utente

Contex

Contex IQ FLEX Manuale utente

Contex

Contex XD2490 Manuale utente

Contex

Contex SD One 36 Manuale utente

Contex

Contex Chroma 8040 Manuale

Contex

Contex HD Ultra Series Manuale utente

Contex

Contex GX67D Manuale

Contex

Contex AA51A Manuale

Contex

Contex HD Ultra X 6000 Series Come usare

Contex

Contex IQ Quattro X Series Manuale utente

Contex

Contex IQ 2400 Series Come usare

Contex

Contex SD One+ Come usare

Contex

Contex SD 3600 series Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente