Contro l4 C4-16S2-E-B Manuale utente
DisclaimerControl4®makes no representations or warranties with respect to this
publication, and specifically disclaims any express or implied warranties of
merchantability or fitness for any particular purpose. Control4 reserves the
right to make changes to any and all parts of this publication at any time,
without any obligation to notify any person or entity of such changes.
Trademarks
Control4 and the Control4 logo are trademarks orregistered trademarks of
Control4 Corporation. Other product and company names mentioned in
this document may be the trademarks or registered trademarks of their
respective owners.
Copyright Copyright © 2004-2008 Control4. All rights reserved. No part of this
publication may bereproduced, photocopied, stored on a retrievalsystem,
or transmitted without the express written consent of the publisher.
Contact Us
Control4 Corporation
11734 S. Election Road
Salt Lake City, UT 84020 USA
http://www.control4.com
Audio Matrix Switch - 16 Installation and User Guide
Part Number: 200-00039 Rev C (Draft 2)
Hardware Model Number: C4-16S2-E-B
i
Contents
Preface Important Information ....................................1
Safety Instructions .................................1
Graphical Symbols on the Device..........3
Graphical Symbols in this Guide............3
Additional Resources.............................4
Chapter 1 Introduction to the Audio Matrix Switch.........5
Features and Benefits............................5
Network Requirements ..........................5
What’s in the Box...................................6
About the Audio Matrix Switch...............6
Front View.........................................6
Back View.........................................7
Source Inputs....................................7
Audio Outputs...................................7
Front Display.....................................8
Technical Specifications...................9
Chapter 2 Set Up the Audio Matrix Switch...................11
Plan Your Physical Layout...................11
Connect Input and Output Devices......14
Connect to the Network and Power.....14
Set Up Logical Connections ................14
Network Configuration .........................15
Chapter 3 Use Audio Matrix Switch..............................19
View Output Assignments....................19
Manage Outputs..................................20
View Output Assignments...............20
Configure an Output .......................21
Check Signal Status .......................22
View Network Settings.........................23
Set Front Display Preferences.............23
ii
Chapter 4 Regulatory Compliance and Warranty.........25
Regulatory Compliance .......................25
FCC ................................................25
Industry Canada .............................26
Edison Test Lab (ETL)....................26
CE Declaration of Conformity.........27
Warranty ..............................................28
Index.....................................................................................29
1
PREFACE Important Information
Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. Apolarizedplughas two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The
wide blade or the third prong is provided for your
safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
2
moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lighting storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when a power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING! Do not expose the apparatus to
dripping or splashing. Do not place objects filled
with liquids near the apparatus.
WARNING! To reduce the risk of fire or electrical
shock, do not expose this apparatus to rain or
moisture.
WARNING! Equipment must be connected to a
Mains socket outlet with a protective earthing
connection.
3
Graphical Symbols on the Device
The following information is placed on the device:
Graphical Symbols in this Guide
Warning, Caution, Note, and Tip paragraphs draw your
attention to important safe practices and additional
informationwhich mayhelpyouavoidinjury,death,orloss
of material or time.
WARNING! This indicates a potentially hazardous
situation that, if not avoided, may result in death or
serious injury. DO NOT IGNORE A WARNING!
CAUTION! This indicates a potentially hazardous
situation that, if not avoided, may result in minor or
moderate injury. DO NOT IGNORE A CAUTION!
4
IMPORTANT! This indicates information that will help
youavoiddamage to your equipment, loss ofmaterials, or
loss of time. PAY ATTENTION TO THESE IMPORTANT
STATEMENTS!
NOTE: This indicates a note on related information
about the current topic.
TIP: This indicates a tip that may save you time or effort.
Additional Resources
The following resources are available:
`Your Control4-authorized reseller
`Control4 Web Site: http://www.control4.com/
5
CHAPTER 1Introduction to the Audio
Matrix Switch
Control4 systems are uniquely configured for every
customer and every site. A popular component among
music lovers is the Control4 Audio Matrix Switch.
This chapter introduces the Control4 Audio Matrix Switch
and its features.
Features and Benefits
`Switches up to 16 input sources to up to 16
simultaneous output zones.
`Adjustable gain, treble, bass, and balance for each
zone
`Audio sensing on inputs
`Device chassis is three standard rack units (RU) tall
and rack mountable conforming to EIA 19” rack
standards (5.25” x 17.34” x 14”)
`Communicates with control devices via Ethernet
10/100 port and ZigBee (a wireless standard for
mesh-networking).
`Backlighting feature turns on with any button push or
Select Dial push and stays lit for a preset time (default
is 30 seconds).
Network Requirements
In order for the Audio Matrix Switch to be managed and
controlled from the Control4 user interfaces, it must
communicate with the system through either a wired
(Ethernet) or wireless (ZigBee 802.15.4 mesh) network. If
you want to use an Ethernet connection for the Audio
6
Matrix Switch, ensure that your home network wiring is in
place before starting system setup.
What’s in the Box
The following items are included in your Control4 Audio
Matrix Switch box.
`Control4 Audio Matrix Switch
`IEC power cord
`This manual
About the Audio Matrix Switch
Front View
1. Front Display—For displaying or setting
audio switch settings and navigating system
menus
2. Buttons—For choosing options or menus
displayed in the front panel user interface
3. Select Dial—For scrolling through and
selecting screen elements or options
displayed in the LCD
123
Altri manuali per C4-16S2-E-B
3
Indice
Altri manuali Contro l4 Commutatore a matrice
