Convision CC-5351 DIR Manuale utente
Manual CC 5351 DIR 1
Manual
CC-5351 DIR
Date: January 2011 Convision Systems GmbH
Manual CC 5351 DIR 2
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than those specified.
Do NOT expose this appliance to rain or moisture.
This Installation should be made by a qualified service person and should confirm to all local codes.
Manual CC 5351 DIR 3
Warning
The camera requires periodic inspection.
Contact an authorised technician to carry out the inspection.
Stop using your camera when you find it malfunctioning.
If the camera emits smoke or is unusually hot for a long period, a fire may be caused.
Do not install the camera on a surface that can not support it.
If the camera is installed on an inappropriate surface, it may fall and cause injury.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not dis-assemble the camera.
It may result in an electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in a fire or other hazards.
Manual CC 5351 DIR 4
Contents
NOTICE 5
Important Safeguard 5
Precautions 5
Features 6
Names and Functions of Parts 7
Dimension 8
Installation 9
Cable Connection 10
Camera Operation 10
Menu 10
Settings 10
Lens (selection) 12
Shutter (conditions and speed control) 13
White Balance control 14
BACKLIGHT 15
AGC (Auto Gain Control) 16
DNR (Digital Noise Reduction) 16
SENS UP (Low illiminance) 17
Special 18
EXIT 22
Troubleshooting 23
Specifications 24
Manual CC 5351 DIR 5
NOTICE
Important Safeguard
1. Read Instructions
Read all of the safety and operating instructions before using the product.
2. Retain Instructions
Save these instructions for future reference.
3. Attachments / Accessories
Do not use attachments or accessories unless recommended by the appliance manufacturer as they
may cause hazards, damage product and void warranty.
4. Water and Moisture
Do not use this product near water or moisture.
5. Installation
Do not place or mount this product in or on an unstable or improperly supported location. Improperly
installed product may fall, causing serious injury to a child or adult, and damage to the product. Use only
with a mounting device recommended by the manufacturer, or sold with the product. To insure proper
mounting, follow the manufacturer's instructions and use only mounting accessories recommended by
manufacturer.
6. Power source
This product should be operated only from the type of power source indicated on the marking label.
Precautions
■Operating
-Before using, make sure power supply and others are properly connected.
-While operating, if any abnormal condition or malfunction is observed, stop using the camera
immediately and then contact your local dealer.
■Handling
-Do not disassemble or tamper with parts inside the camera.
-Do not drop or subject the camera to shock and vibration as this can damage camera.
-Care must be taken when you clean the clear dome cover. Especially, scratch and dust will ruin your
quality of camera.
■Installation and Storage
-Do not install the camera in areas of extreme temperature, which exceed the allowable range.
-Avoid installing in humid or dusty places.
-Avoid installing in places where radiation is present.
-Avoid installing in places where there are strong magnetic fields and electric signals.
-Avoid installing in places where the camera would be subject to strong vibrations.
-Never expose the camera to rain and water.
Manual CC 5351 DIR 6
Features
Horizontal Resolution 540 TV Lines
Clear image quality has been achieved by
employing a SONY CCD with 410,000
(effective) pixels, which provides a
horizontal resolution of 540 TV lines.
Filter Changeable Day & Night
This camera has a function that
automatically selects the mode that is
appropriate for daytime or night-time
conditions. The COLOR mode operates in
daytime conditions to provide optimum
colours, and BW mode operates in night
time conditions to enhance the definition of
the image.
Photot Sensor & IR LED (27 pcs)
IR LEDs are auto switching according to
the control of photo sensor.
Privacy Function
The Privacy function conceals the areas
you do not wish to appear on the screen.
Electronic IRIS
The electronic IRIS function enables continuous
automatic control of the shutter between 1/60 ~
1/120,000 seconds.
DNR (Digital Noise Reduction)
The amount of low illuminance noise has been
significantly reduced and the signal to noise
ratio /S/N ratio) as well as horizontal resolution
have been improved, resulting in a clear and
sharp image display even in the dark.
High Sensitivity
The built-in high sensitivity SONY COLOR CCD
enables a clear image even in the dark.
Additional Functions
SENS-UP, MOTION DETECTION, MIRROR,
SHARPNESS and SYNC(INT/LL) function are
also available.
Controlled by OSD Menu
The camera can be controlled by selecting text
displayed on the monitor screen.
3 Axis built-in 120 mm Dome Housing
Manual CC 5351 DIR 7
Names and Functions of Parts
Lens: Vari-Focal Auto Iris Lens
OSD PCB
Manual CC 5351 DIR 8
●SETUP button: Used for the menu display. This button can be used to confirm settings after
changing the value of the selected function or current conditions.
●UP & DOWN buttons: Used for selecting items by moving the cursor up or down on the menu screen.
●LEFT & RIGHT buttons: Used when changing item values, by moving the cursor to the left or right
on the menu screen.
■VBS-EXTRA FOR CONNECTING TO LCD
Please use the supplied wire when connecting to LCD
■3 AXIS BRACKET
Please loosen screws and fix tilted and panned position.
■SMPS PCB FOR DUAL POWER
Dimension
Manual CC 5351 DIR 9
Installation
1. Dome Base Mounting
- Open the dome cover by loosening the ring
- Mount the base of camera to a sturdy surface using 2 screws and 2 premade holes on the base of the
dome.
2. Power Connect & Monitor Impedance
- DC12V/1000mA, AC24V/500mA regulated power supply.
- To avoid fire or shock hazard, must use a UL listed power supply.
- Set the monitor impedance switch to 75Ω. Check the impedance switch when the screen turns blurred.
3. Camera Module Adjustment
- Loosen screws for 3-axis camera bracket and adjust the direction and angle of camera.
- Make sure to retighten the screws for camera bracket.
4. Dome Cover Mounting
- Replace the dome cover to the base and tighten the ring.
Manual CC 5351 DIR 10
Cable Connection
Camera Operation
Menu Setup menu
Lens (selection) Manual DC
Shutter ESC Manual FLK
White Balance control ATW AWC Manual
Backlight OFF LOW MIDDLE HIGH
AGC (Auto Gain control) OFF LOW MIDDLE HIGH
DNR (Digital Noise Reduction) OFF LOW MIDDLE HIGH
Sens-Up (Low Illumination) OFF Auto
Special Camera ID Colour
SYNC Motion Detection
Privacy Mirror
Sharpness Reset
Return
Exit
Settings
Settings can be made using the 5 buttons located in the camera.
Indice
Altri manuali Convision Telecamera di sicurezza
Convision
Convision CC-5400 Manuale utente
Convision
Convision CC-6357 Manuale utente
Convision
Convision CC-6601-A Manuale utente
Convision
Convision CC-8xxx Series Manuale utente
Convision
Convision CC-5307 Manuale utente
Convision
Convision CC-5451 IR Manuale utente
Convision
Convision CC-7130 Manuale utente
Convision
Convision CC-5501-E Manuale utente
Convision
Convision CC-5308 Manuale utente
Convision
Convision CC-5304 IR Manuale utente
