coolado E-PUMP X Manuale utente
CORDLESS HIGH-PRESSURE SMART TIRE PUMP
E·PUMP X USER MANUAL
Thank you for purchasing the Coolado ePump X!
Discover the endless usages of this little device
and share your experience on our website:
www.coolado.com
1.
2.
3.
4.
5.
2. PRODUCT DESCRIPTION
USB-C
USB-C cable
ePump X
2 Nozzles
Fully charge the Coolado ePump X before the first use
The 2 Nozzles that can be used on both the inflating
as well as on the deflating ports.
1. BOX CONTENTS
Deflating port
Inflating port
On/Off button
LED battery status indicator
Micro-USB port for charging
1.
2.
3.
4.
5.
to ignite your BBQ
as an air dryer (without heat)
-
-
You can also use the Coolado ePump X
5. OTHER APPLICATIONS
According to the usage scenario, it can be used directly or with a
nozzle atached to the pomp!
4. INFLATING / DEFLATING FUNCTION
Inflation
Deflation
Choose the appropriate nozzle and connect it to the
inflating port
Switch on the Coolado ePump X and start inflating.
1.
2.
Choose the appropriate nozzle and connect it to the
deflating port
Switch on the Coolado ePump X and start deflating.
1.
2.
CAUTION: Blocking air ports can lead to engine rupture.
Long press the power button to turn the pump on and off
In the startup state when power is on, press the power button one
by one to cycle through the 3 air speed modes - slow/faster/fastest -
by pressing the button briefly each time.
6. SWITCHING ON/OFF
Turbine Fan Status Indicator Light Status
At Work
During
Charging
Sufficient Battery Indicator Light On Green
Low Battery Indicator Light On Red
Charging Indicator Light On/
Red Light Flashing
Fully Charged Indicator Light On Green
8. LED LIGHT INDICATOR
The Coolado ePump X comes with a standard micro USB-C cable. In
order to save the environment, we don’t supply a charger. A 5V
mobile phone charger could be used (after checking the voltage)
7. CHARGING
Connect the Micro USB-C cable to the USB port of the ePump X.
Connect the USB cable to the charger.
Plug the charger into the wall socket.
The ePump X will show a flashing red light when it is charging.
When the ePump X is fully charged the light will turn green.
1.
2.
3.
4.
5.
CAUTION:
Each ePump X has a built-in non-removable lithium battery.
Do not throw it into fire or dispose of it carelessly.
Overheating, shock and water ingress may cause the lithium
battery to catch fire, spontaneous combustion or explosion.
The ePump X should be stored in a cool, clean and dry place. The
storage temperature of the product should not be lower than
-10°C or higher than 45°C. Heat or cold will shorten the life of
the product and damage the built-in battery.
The ePump X battery must be recharged within seven days if it is
dead. It may become damaged if not used for a long time. It is
recommended that you charge the ePump X immediately after
purchase and then charge it at least once every six months, even
when not in use.
-
-
-
To avoid accidental injuries such as electric shock and fire caused by
improper use, please read this instruction carefully before using the
product.
10. SAFETY INSTRUCTIONS
This product contains a built-in rechargeable battery. Do not put
it into fire or heat it, and do not charge it under high temperature
conditions
Avoid direct sunlight when using, placing, and inside the vehicle,
as it may cause overheating, ignition, or explosion.
It is recommended to use it in an environment between 0 °C and
40 °C.
Do not allow children to come into contact, play, use, or maintain
this product.
Do not use this product with wet hands to prevent injury.
Do not use it to absorb any liquids (such as water, cola, etc.) and
hard or sharp objects (such as glass, nails, etc.).
Do not use it to absorb any burning or smoking objects (such as
unlit cigarette butts).
Flammability may cause the product to catch fire.
Please use this product according to the instructions in the
manual. Any losses caused by improper use shall be borne by the
user.
-
-
-
-
-
-
-
-
-
USAGE RESTRICTIONS
9. BASIC PARAMETERS
Product Name: ePump X
Motor: Brushless
Battery capacity: 1100mAh
Rated Power: 120W
Working Voltage: DC 11.1V-12.8V
INPUT: 5V一2A
Interface Type: Type-C
Net weight of product: approximately 0.25kg
Product Size: 42 *140*72mm
Charging Duration: 3:30 Hours
11. WARRANTY
The Coolado warranty is in accordance with the EU law and
regulations The Coolado ePump X has a limited warranty of 24
months after the date of purchase.
Damages to the Coolado caused by abuse, abnormal operation,
water damage, non-advised power supply, are not included in the
warranty. The liability of Coolado will ALWAYS be limited to the
value of the ePump X and coolado is not liable for damages to
persons and/or property.
Do not disassemble, repair, or modify the battery without
authorization.
Do not charge near heat sources or damp areas (such as
radiators or bathrooms).
Do not use a damp cloth or wet hands to wipe and clean
products during charging.
If the charging wire is damaged or broken, please stop using it
immediately.
If you do not use this product for a long time, please fully charge
it, unplug the charging cable, and place it in a cool and dry place,
at least every 6 months
-
-
-
-
-
BATTERY AND CHARGING
Indice
Altri manuali coolado Pompa dell'acqua
Manuali Pompa dell'acqua popolari di altre marche
Sykes AmeriPumps
Sykes AmeriPumps GP100M Guida alla risoluzione dei problemi
DUROMAX
DUROMAX XP WX Series Manuale utente
BRINKMANN PUMPS
BRINKMANN PUMPS SBF550 Manuale utente
Franklin Electric
Franklin Electric IPS Manuale utente
Xylem
Xylem e-1532 Series Manuale utente
Milton Roy
Milton Roy PRIMEROYAL Manuale utente