Cooler Master Centurion 534 Manuale utente
Centurion 534
English
1
Warranty Information
Cooler Master guarantees that this device is free of defect in material and
workmanship, and provides a two-year limited hardware warranty for the device
commencing from the date of purchase. Please keep your receipt for proof of
purchase.
This product is designed for computer usage only. Using this device in any other
capacity voids the warranty. If you are not familiar with computer hardware
installation, please ask for professional assistance.
The warranty offered covers normal use. Defect or damage that result from
improper operation, storage, misuse or abuse, accident or neglect, which are not
the fault of Cooler Master, are exclude from warranty coverage.
Note: the warranty is voided by removal or alternation of product or parts identification labels.
Chapter 1: Product Overview
Specifications:
Available Color Silver
Dimensions L480 x W202 x H435 mm
Weight 9.7kg
Material Aluminum & Mesh bezel, SECC chassis
M/B Type ATX , m-ATX
5.25" Drive Bay 5 (Exposed)
3.5" Drive Bay 1 (Exposed); 4 (Hidden)
Cooling System One 120x120x25mm front Blue LED fan(Intake);
One 120x120x25mm rear fan (Exhaust) (Option)
I/O Panel USB2.0 x 2; MIC x 1; SPK x 1; IEEE1394 x 1
Power Supply Standard ATX PS2, 380W. support LGA775 (option)
!
Diagram:
Centurion 534
English!
2
Parts list:
Item Part Name Q’ty Item Part Name Q’ty
1 Small Shield 1 8 Latch 1
2 Big Shield 5 9 Interface card Shield 7
3 I/O Module 1 10
Right Side Casing 1
4 Power Key 1 11
Left Side Casing 1
5 Reset Key 1 12 Manual Screw 4
6 Casing 1 13 Air Scoop 1
7 IO panel 1 14 120 Fan 2
Fittings Pack
Figure Name Q’ty Used for
6.5mm Outer thick
inner thin copper post 2 Used especially for positioning
the mainboard.
6.5mm Outer thick
inner thin copper post 7 Screw on the Mainboard tray
6.5mm Inner/outer
thick copper post 4 For Xeon Only
Screw Pack
Figure Name Q’ty Used for
M3*5 Screws 19 Screw on the Mainboard
tray ,FDD
6*10 Screws 4 Installed on the mainboard to
fix the CPU
M3*7 Screws 9 Secures CD ROM
Centurion 534
English
3
Chapter 2: Installation
Removing side panels
1. Loosen the screws manually; slide the side casing backward to remove it.
2. To assemble it, please follow the above step reversely.
Installing the Motherboard
1. Remove the side casing.
2. Lie down the casing.
3. Aiming at the holes on the PCB, and secure the alumnus post with screws.
4. Align the holes of PCB and casing. Secure them by fastening screws on the
PCB.
Install add-on card
1. Press to loosen the latch on the inner casing.
2. Insert the add-on card.
Centurion 534
English!
4
3. Lock the latch back from the outside of the casing.
Installing Drives (CD-ROM, FDD and HDD)
Hands on where is indicated by an arrow and exert some force to remove the front
panel.
1. Installing Hardware Device on 5.25"3.5" or "HDD" bracket-- Layer III, IV, or V.
2. Insert the hardware device in place; align the screw holes of the device with
those of the HDD rack.
3. Push forward the plastic handling and tightening it.
4. Push the lock and the installation is done.
Installing the power device
1. Remove side casing.
2. Place the power supply in the power supply bracket with the power cord side
facing forwards.
3. Secure the power supply device with screws.
4. Assemble the side casing and the installation is done.
Centurion 534
English
5
Replacing/Installing the Case Fan
Change the Front Fan
1. Remove the side casing.
2. Loosen the lower and side screws to remove the HDD bracket.
3. Loosen the fan screws from the front casing, and then remove the fan.
4. Install the new fan and secure it with screws. Continue to put it back on the
HDD rack and secure it with screws.
Change the Rear Fan
1. Loosen the fan screws from the rear casing and remove the fan.
2. Install the new fan and secure it with screws.
1. Take out the HDD rail from the package. Install it on the HDD and have the
screw holes aligned.
2. Insert the assembled HDD into the hardware rack.!
CS-8006-02 REV 01
Centurion 534
English!
6
I/O Function Panel Installation Guide
zPlease refer to the illustration on the section of USB2.0, IEEE 1394, and Audio connector
from the motherboard user manual. Please select the motherboard which used the same
USB2.0, IEEE1394a, AC'97,HD Audio standard as below; otherwise, it will cause damages
to device(s).
zThe following illustration is a connection diagram for the front panel I/O cable.
zNEVER connect an IEEE1394a cable to the USB2.0 connector. Doing so will damage the
device.
zNEVER connect a USB2.0 cable to the IEEE1394a connector. Doing so will damage the
device.
zOn some motherboards, the connectors for IEEE1394a, USB2.0 and Audio are not the same
as the drawing below. Please check with your motherboard manual before installing.
!
Contact us:
www.coolermaster.com
Email: info@coolermaster.com.tw
Headquarters, Taiwan
Tel: +886 2 32340050
Fax: +886 2 32340221
Indice
Altri manuali Cooler Master Accessori per computer
Cooler Master
Cooler Master CM Storm Trooper SGC-5000-KKN1 Manuale di installazione e funzionamento
Cooler Master
Cooler Master CM 690 Manuale utente
Cooler Master
Cooler Master silencio 550 Manuale utente
Cooler Master
Cooler Master Elite 340 Manuale utente
Cooler Master
Cooler Master Elite 120 Series Manuale utente
Cooler Master
Cooler Master HAF 912 series Manuale utente
Cooler Master
Cooler Master MasterCase Pro 5 Manuale utente
Cooler Master
Cooler Master K350 Manuale utente
Cooler Master
Cooler Master Cosmos Manuale utente
Cooler Master
Cooler Master Elite 370 Manuale utente
Cooler Master
Cooler Master Cooler Master Manuale utente
Cooler Master
Cooler Master Elite 241 Manuale utente
Cooler Master
Cooler Master CM 690 II Manuale utente
Cooler Master
Cooler Master Centurion 5 II Manuale utente
Cooler Master
Cooler Master SGC-2100(scout-2) Manuale utente
Cooler Master
Cooler Master Glite431 Basic Manuale utente
Cooler Master
Cooler Master Elite 310 Manuale utente
Cooler Master
Cooler Master CM 690 II Manuale utente
Cooler Master
Cooler Master Hiper 212 Plus Manuale utente
Cooler Master
Cooler Master Glite 361 Manuale utente
