Cornelius Adapter Lid Manuale utente
Adapter Lid For 255/215 - Installation Instructions
- 1-
ADAPTER LID FOR 255/215
Installation Instructions for Adapter Lid For 255/215
SAFETY OVERVIEW
• Read and follow ALL SAFETY INSTRUCTIONS in this manual and any warning/caution labels on the unit
(decals, labels or laminated cards).
• Read and understand ALL applicable OSHA (Occupational Safety and Health Administration) safety regula-
tions before operating this unit.
SAFETY ALERT SYMBOL
!
This is the safety alert symbol. When you see this in the manual or on the unit, be alert to the
potential of personal injury or damage to the unit.
Types of Alerts
Indicates an immediate hazardous situation which if not avoided WILL result in serious
injury, death or equipment damage.
Indicates a potentially hazardous situation which, if not avoided, COULD result in serious
injury, death, or equipment damage.
Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or
moderate injury or equipment damage.
SAFETY TIPS
• Carefully read and follow all safety messages in this manual and safety signs on the unit.
• Keep safety signs in good condition and replace missing or damaged items.
• Learn how to operate the unit and how to use the controls.
• Do not let anyone operate the unit without proper training. This appliance is not intended for use by very
young children or infirm persons without supervision. Young children should be supervised to ensure that
they do not play with the appliance.
• Keep your unit in proper working condition and do not allow unauthorized modifications to the unit.
!
DANGER:
!
WARNING:
CAUTION:
!
Revision Date: October 26, 2021
© 2021, Marmon Foodservice Technologies, Inc.
www.cornelius.com Revision: B
Publication Number: 548000078INS
Adapter Lid For 255/215 - Installation Instructions
Publication Number: 548000078INS - 2-© 2021, Marmon Foodservice Technologies, Inc.
SAFETY INSTRUCTIONS
!
WARNING:
Before starting installation, read and understand all safety label and warnings on the machine. Also review and
understand all safety instructions in the owners, installation and service manuals.
Failure to comply could result in serious injury, death or damage to the equipment.
QUALIFIED SERVICE PERSONNEL
!
WARNING:
Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.
All wiring and plumbing must conform to national and local codes. Failure to comply could result in serious injury,
death or equipment damage.
SAFETY PRECAUTIONS
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work. Failure to comply could result in serious injury, death or damage to
the equipment.
CAUTION:
!
Always be sure to keep the area around the unit clean and free of clutter. Failure to keep this area clean may result in
injury or equipment damage.
CAUTION:
!
Note the following: This unit is not designed for use in outdoor locations. The appliance must be placed in a horizontal
position. The appliance is not suitable for installation in an area where a water jet would be used.
Adapter Lid For 255/215 - Installation Instructions
FUNCTION:
• The lid functions as a manual fill lid normally and then can be cut to appropriate score and be an ice
adapter.
CAUTION:
!
Before Installing the Lid, remove the existing cover if present, you will have two paths for the installation, with and
without ice maker on top of the unit.
LID INSTALLATION (WITHOUT ICEMAKER)
Table 1: Lid Installation (Without Icemaker)
Step Action Figures
1. Hold the cover with the lid folded on the back
cover and facing down.
Figure 1.
2. Position the front and the back of the lid, as
shown.
Figure 2.
3. Place the lid on top of the unit.
Figure 3.
Publication Number: 548000078INS
-3-
© 2021, Marmon Foodservice Technologies, Inc.
4.Close the lid and cover the rest of the bin.
Figure 4.
Adapter Lid For 255/215 - Installation Instructions
LID INSTALLATION (WITH ICEMAKER)
Table 2: Lid Installation (With Icemaker)
Step Action Figures
1.
You will have to cut the lid according to the cut-out
schematic (Figure 13) based on the ice maker to be
installed.
Figure 5.
2. Use a box knife or a hand tool to cut the
corresponding lines.
Figure 6.
3.
After cutting the lid, use your finger and a flat
screwdriver to remove the unwanted part of the lid.
Figure 7.
Publication Number: 548000078INS -4-© 2021, Marmon Foodservice Technologies, Inc.
4. Remove the lid and clean any remaining part on the
opening.
Figure 8.
5.
Place the 28" bar from the kit in the front pocket as
shown in Figure 9.
For the 30" ice maker turn the spacers on the end of
the bar to face down. Apply RTV on each end of the
bar to fill gap between bar and hopper as shown in
Figure 10.
For a 22" ice maker turn the spacers on the end of
the bar to face upwards and use (2) front to rear bar.
Apply RTV on each end of the bar to fill gap
between bar and hopper as shown in Figure 11.
Figure 9.
Figure 10.
Figure 11.
6.
Add some RTV (Silicon), all around the exterior
line, as shown. Place the cut lid on top of the ice bin.
Figure 12.
Adapter Lid For 255/215 - Installation Instructions
Publication Number: 548000078INS
-5-
© 2021, Marmon Foodservice Technologies, Inc.
SPACER
7. Hold the cover with the lid folded on the back cover
and facing down.
Figure 13.
8.
Put the front and back of the lid back into position,
as shown.
Figure 14.
9.
Place the lid back on top of the unit and close front
lid.
Figure 15.
Adapter Lid For 255/215 - Installation Instructions
Publication Number: 548000078INS -6-© 2021, Marmon Foodservice Technologies, Inc.
CUT-OUT SCHEMATIC
Figure 13-1
-7-
Figure 13-2
Figure 13-3
Adapter Lid For 255/215 - Installation Instructions
Publication Number: 548000078INS
© 2021, Marmon Foodservice Technologies, Inc.
14" WIDE ICEMAKER
OPENING
(MOUNTED SIDEWAYS)
MANUAL/AUTO ICE FILL OPENING
MANUAL/AUTO ICE FILL OPENING MANUAL/AUTO ICE FILL OPENING
14" WIDE ICEMAKER
OPENING
30" WIDE ICEMAKER
OPENING
(Measure the outside width of your ice maker to determine the appropriate cutout on the following pages.)
Publication Number: 548000078INS - 8-© 2021, Marmon Foodservice Technologies, Inc.
Figure 13-4
Figure 13-5
Adapter Lid For 255/215 - Installation Instructions
MANUAL/AUTO ICE FILL OPENING
FOLLET ICEMAKER
OPENING
(NON TOP MOUNTED ICE MAKER)
MANUAL/AUTO ICE FILL OPENING
22" WIDE ICEMAKER
OPENING
Indice
Altri manuali Cornelius Macchina per il ghiaccio
Cornelius
Cornelius Nordic CCU0300 Series Manuale utente
Cornelius
Cornelius Nordic Black/Gray Style Lid CCM522 Manuale utente
Cornelius
Cornelius DPT 230 Supplemento
Cornelius
Cornelius 500 - Series Manuale utente
Cornelius
Cornelius CONTINUOUS FLOW ICEMAKER 1400R Manuale utente
Cornelius
Cornelius TS-061 Manuale dell'operatore
Cornelius
Cornelius WCC1401-A Series Manuale utente
Cornelius
Cornelius Starbucks UC100 Manuale utente
Cornelius
Cornelius 2306 Manuale utente
Cornelius
Cornelius 1000-Series Manuale utente
Cornelius
Cornelius EVAPORATOR CONVERSION KIT WCC700 Manuale utente
Cornelius
Cornelius I Series Manuale utente
Cornelius
Cornelius ED-300 Manuale utente
Cornelius
Cornelius WCF1411-A Series Manuale utente
Cornelius
Cornelius UC 150 Manuale utente
Cornelius
Cornelius SCOTSMAN CM1000 Series Manuale utente
Cornelius
Cornelius 1400 Series Guida all'installazione
Cornelius
Cornelius ICE MAKER Manuale utente
Cornelius
Cornelius CCM CCU Manuale di installazione e funzionamento
Cornelius
Cornelius SERIES 750 (R404a) Manuale utente
