Cornell CT-EDC38 Manuale utente
Toaster CT-EDC38
1
General Safety Precautions
1. Thank you for your purchase of this appliance. Read all
instructions carefully. Keep this User Manual for future reference.
2. Always unplug the appliance from the power socket before
cleaning or when not in use.
3. If it is a detachable power cord, always connect the power cord to
the appliance first BEFORE plugging it into the power socket. To
disconnect the appliance, switch it off first before removing the
power plug from the power socket.
4. Close supervision is necessary when operating the appliance
near children. Ensure that the power cord does not hang over the
work surface.
5. Do not use the appliance for any purposes other than its intended
use.
6. Do not operate the appliance with a damaged power cord set or
plug. Any repairs should always be carried out by an authorized
service centre.
7. Always place the appliance on a flat sturdy surface. When
moving it, always ensure not to touch the hot surfaces and avoid
spilling any hot items it may contain.
8. Do not immerse the appliance or electrical parts into water or any
other liquids.
9. Use of accessories or equipments not supplied by the
manufacturer may result in damages or malfunction on the
appliance or injuries to the user.
10. This appliance should not be used by people who are physically
or mentally impaired (including children) unless proper guidance
is provided during operation.
2
11. The bread may burn, therefore do not use the toaster near or
below combustible material, such as curtains.
Parts Identification
Specifications
Model No.
CT-EDC38
Voltage / Frequency
220-240V~, 50Hz
Power
550-650W
Operating Instructions
Before using for the first time: Operate the toaster at the highest
degree of browning for three times without any bread.
3
Making toast
When you plug the toaster into the power socket, revolve the
browning selector knob to the centre position. There are 7
browning degrees that can be selected by adjusting the
corresponding knob from 1=lightest toast, up to 7=darkest toast.
Insert the bread slices into the slots.
Press the ON lever downwards to lower the slices of bread into
the toaster. The toaster will start operating.
The ON lever will return to its original position when the toasting
is done.
While the toaster is operating, it is possible to make the toast
lighter or darker by turning the browning selector knob.
The toaster switches off automatically when the toasting time
comes to an end. The toasted breads will pop up from the slot.
Press the CANCEL button when
The toast is too dark.
Or a fault occurs.
WHAT DO YOU NEED TO KNOW ABOUT BREAD SLICES?
The bread type, moist content, freshness, thickness and quantity
will all have an effect on the browning outcome.
If you are going to toast two slices of bread side by side and
getting similar result, they should be the same bread type, moist
content and freshness.
The toaster can be used for any breads, cakes, frozen products
and pastries with no toppings.
The thickness of each bread slice should not exceed 2.5 cm.
Very thin bread slices:
Will not be centered automatically.
Should be toasted at the lowest degree of browning in order to
avoid being burnt on one side.
Always store sliced breads for toasting in a dry location.
Keep the breads in a sealed wrapper to maintain freshness.
Darker types of bread generally need to be toasted at a higher
degree of browning.
4
Care and Cleaning
Pull out the power plug and wait for the toaster to cool down.
Remove and empty the crumb tray.
Wipe the exterior parts with a damp cloth.
Do not use sharp objects or abrasive substances to clean the
toaster.
Do not immerse the toaster into water or put it in a dishwasher.
For any other maintenance and servicing work not described
here, ensure that they are performed only by an authorized
service personnel.
Regular cleaning, care and servicing of the toaster will ensure its
performance at all times.
0
Indice
Altri manuali Cornell Tostapane
