Countryside CLS Static Manuale utente
Setup Guide
CLS Static
Wi-Fi Camera
2
Step 1.
Assemble the camera
• Screw the aerial onto the camera
without overtightening.
Step 2.
• Remove the rectangular access
panel with a screwdriver from the
bottom of the security camera.
• Insert your SD card (optional) as
shown in the photo.
• Make sure the access panel is
securely screwed back down to
ensure water resistance.
Insert SD card
3
4
Step 3.
• Use the DC barrel to connect the
security camera to the power supply
• If you are using the 12V leisure
battery connection leads, you will
not need to use the camera’s plug.
Connect to power
5
Ethernet
Reset
Power
6
Step 4.
• On your phone or tablet go to
the App / Google Play store and
download the CamHipro app.
• Open the app and grant permission.
• Go to the Wi-Fi settings on your
device and connect to the network
named IPCAM***
• The password is 01234567
• When connected go back to the
Camhipro app.
Add camera to app
CamHipro
7
Select ‘Add Camera’
Select ‘Device in Use’
Select ‘IP Camera’
Select ‘Scan QR Code’
8
Scan QR Code
Name Your Camera
Select ‘Conrm Add’
Wait for Connection
9
Tap ‘Yes’ to Change
Password
Complete the Tutorial
10
Step 5.
• Tap the ‘cog’ icon and complete
these steps to connect to your
chosen Wi-Fi network.
• Your camera will then be connected
to your Wi-Fi. This can take up to 30
seconds.
Connect to WI-Fi
Tap ‘Wireless Settings’ Tap ‘Get wireless
network around device’
Indice
Altri manuali Countryside Telecamera di sicurezza
