4
READ and follow all the instructions
and safety precautions in the user
manual before setup or use.
THIS DUST CYCLONE is designed for
wood dust only. It is not to be used for
other materials such as liquids or
metal scraps but not limited to, nails
and fillings. It is also not intended to
collect large pieces that will not pass
through the impeller
DO NOT place your hands or tools
near the open inlet while the dust
cyclone is running. Turn the machine
OFF to repair, service, or inspection
(such as clogging).
DO NOT operate the dust cyclone in
areas exposed to ignition sources
such as pilot lights or open flame
etc...Suspended particulates may be a
source of explosion.
ALWAYS wear personal protective
devices such as masks, respirators,
and safety glasses when emptying
dust from the collection bags. Proper
disposal method should be followed.
MAKE SURE the collection bags and
the canisters are securely fastened to
the collector body before every use.
METALLIC OBJECTS that strike the
impeller may produce a spark which can
smolder in wood dust for a long period
of time before fire or flame is detected.
While operating the dust cyclone, if
metal contacts metal, immediately turn
the switch to the OFF position and
unplug the cord from the outlet, allowing
the impeller to come to a complete stop.
Empty the dust into an approved air tight
metal container and remove all metal
objects from dust prior to resuming
operation.
CERTAIN WOODS maybe an irritant or
cause an allergic reaction. It is good to
know what type of wood dust you will be
exposed to, in case there is an allergic
reaction. Always wear approved
personal safety equipments.
ALWAYS turn OFF the dust cyclone
and disconnect power, allowing the
impeller to come to a complete stop
before servicing the dust cyclone or
connected system.
MAKE SURE you have read and
understood all the safety instructions in
the manual and you are familiar with
your dust cyclone, before operating it. If
you fail to do so, serious injury could
occur.
CX413 – 3HP DUST CYCLONE
SPECIFIC SAFETY INSTRUCTIONS
WARNING!
The safety instructions given above can not be complete because the environment in
every shop is different. Always consider safety first as it applies to your individual
working conditions.
