Craftsman 486.24608 Manuale utente

Owner's IVlanuai

FRONT U E

IVlodel No. 486.24608

Fits 917 Series LT/YT/GT Tractors

DO NOT RETURN TO STORE

For Missing Parts or Assembly

Questions Call 1-866-576-8388

,,iiiiiii-............... iiiiiiiiiiiiiill

CAUTION:

Before using this product, read

this manual and follow all Safety

Rules and

Operating Instructions.

,, Safety

,, Assembly

,, Operation

,, Maintenance

,, Parts

Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.

www.craftsman.com

PRINTED iN U.S.A. FORM NO. 42033 (02/05109)

WARRANTY .,_

CRAFTSMAN ONE=YEAR FULL WARRANTY

When assembled, operated and maintained according to

the supplied instructions, if this product fails due to a defect

in material or workmanship within one year from the date of

purchase, return it to any Sears store or other Craftsman outlet

in the United States for free replacement.

This warranty is void if this product is ever used for commercial

or rental purposes.

This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

Sears, Roebuck and Co., D817WA, Hoffman Estates, IL 60179

SAFETY

Any power equipment can cause injury ifoperated improperly

or if the user does not understand how to operate the

equipment. Exercise caution at all times when using power

equipment.

• Refer to your tractor owners manual for "Rules For

Safe Operation".

Look forthis symbol to point out important safety

precautions. It means -- Attention!! Become

alert!! Your safety is involved.

BEFORE YOU BEGIN

TOOLS REQUIRED

(2) 9/16" Wrenches (Socket wrench may be used)

CAUTION! Muffler is hot[ Allow engine to

cool down before proceeding with bumper

installation.

DETERMINE [FYOUR TRACTOR HAS ASINGLE SUSPENSION BRACKET

OR DUAL SUSPENSION BRACKETS .i)

SINGLE SUSPENSION

BRACKET

SUSPENSION

BRACKET

FIGURE 1A (page 3)

DUAL SUSPENSION BRACKETS

SUSPENSION BRACKET SUSPENSION

BRACKET

FIGURE 1B (page 5)

Look under the front of your tractor (Figure 1A & 1B). If there is a single mower deck suspension bracket located underneath

the middle of the front axle, continue on to INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS on

page 3. If your tractor does not have a mower deck suspension bracket underneath the middle of the front axle, skip to

INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS on page 5.

2 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

iNSTRUCTiONS FOR SINGLE SUSPENSION BRACKET TRACTORS

STEP 1: (SEE FIGURE 2)

*Open parts bag labelled "A" and verify that all parts

are present.

NOTE: Place cardboard or a mat on work surface to prevent

scratching of parts removed from carton and tractor.

HARDWARE SHOWN FULL SiZE

EXCEPT WHERE NOTED

(not full size)

PARTS BAG "A"

STEP 2: (SEE FIGURE 3)

• Remove tractor hood. (Refer to tractor manual.)

Remove the browning shield as shown.

FIGURE 2

Ref. Part Qty. Description

A 43350 4 Carriage Bolt, 3/8-16 x 1"

B 44072 4 Whizlock Nut, 3/8"

C R19171616 4 Washer, 1/2"xl"

D 47674 4 Plug

66460 1 Bumper

REMOVE

BROWNING SHIELD

REMOVE

FRONT SCREWS

FIGURE 3

STEP 3: (SEE FIGURE 4)

Place plug on a work bench or solid table and push

end of bumper down onto plug. Repeat for remaining

plugs.

BUMPER

PUSH DOWN

WiTH EVEN

PRESSURE

WORK BENCH

OR SOLID TABLEI

STEP 4: (SEE FIGURE 5)

Place a washer onto a carriage bolt and then insert

the bolt into the second mounting hole from the front

of the tractor frame. Securely tighten a whizlock nut

onto the bolt on the outside of the tractor frame.

Repeat on other side of tractor.

Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

CARRIAGE BOLT

AND WASHER

WHIZLOCK

NUT FIGURE 5

STEP 5: (SEE FIGURE 6)

*Spread ends of bumper enough to fit slots onto bolts

in rear mounting holes in tractor frame.

*The bumper has three mounting holes. The rear

holes provide the most clearance while the forward

holes provide a neater appearance. Use a hole that

provides enough clearance for the hood to stay in

raised position when opened. Place a washer onto

a carriage bolt and insert the bolt through the tractor

frame and into desired mounting hole on each side of

bumper. Secure with a whizlock nut.

iMPORTANT: Before fully tightening nuts, be sure

tractor hood will stay in raised position when opened.

CARRIAGE BOLT

AND WASHER

WHIZLOCK NUT FIGURE 6

STEP 6: (SEE FIGURE 7)

*Replace the browning shield using the front screws

you removed in Step 2.

REPLACE

FRONT SCREWS

REPLACE

BROWNING SHIELD FIGURE 7

4 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

iNSTRUCTiONS FOR DUAL SUSPENSION BRACKET TRACTORS

STEP 1: (SEE FIGURE 2)

*Open parts bags labelled "A" and "B" and verify that

all parts needed are present.

NOTE: Place cardboard or a mat on work surface to prevent

scratching of parts removed from carton and tractor.

NOTE: Not all hardware will be used. Unused parts may be

discarded after assembly

HARDWARE SHOWN FULL SiZE

EXCEPT WHERE NOTED

STEP 2:

(SEE FIGURE 3)

Remove tractor hood. (Refer to tractor manual.)

Remove an (LT) Lawn Tractor heat shield like the one

shown. Remove a (GT) Garden Tractor heat shield

like the one shown only if you need access to inside

of tractor frame during step 5.

iMPORTANT: Be sure to re-attach the heat shield after

bumper is installed.

Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

Ref. Part Qty. Description

A 48894 2 Self Threading Bolt, 3/8-16 x 1-1/2"

B 43062 2 Hex Bolt, 3/8-16 x 1-1/2"

C 43001 4 Hex Bolt, 3/8-16 x 1"

D 44072 4 Whizlock Nut, 3/8"

E 43003 4 Lock Washer, 3/8"

F 47674 4 Plug

65932 1 Bumper

(LT) LAWN TRACTOR

REMOVE THIS

STYLE HEAT SHIELD

(GT) GARDEN TRACTOR

REMOVE THIS HEAT SHIELD

ONLY IF MUFFLER MUST BE

MOVED IN STEP 4.

jFIGORE 3

STEP 3: (SEE FIGURE 4)

*Place plug on a work bench or solid table and push

end of bumper down onto plug. Repeat for remaining

plugs.

BUMPER

PUSH DOWN

WITH EVEN

PRESSURE

WORK BENCH

OR SOLID TABLE

SHORT STEP

,_'_ PLUG (E)

_-_ FIGURE4

STEP 4: (SEE FIGURE 5)

*Remove any bolts present in front mounting holes in

side of tractor frame. If bolt will not screw out of hole,

check if a nut is present on bolt on inside of frame.

On GT tractors, if access to nut is blocked by a front

mounted muffler, slide muffler down exhaust tubes to

rest on top of browning shield.

iMPORTANT: Be sure to re-attach muffler and heat

shield after bumper is installed.

• If rear mounting holes in tractor frame are empty,

install hex bolts and whizlock nuts supplied in the

parts bags. See figure 5.

(LT) LAWN TRACTOR

REMOVE BOLT iNSTALL (C), (D) IF

iF PRESENT HOLE iS EMPTY

SUSPENSION BRACKET /

(LT) LAWN TRACTOR

REMOVE BOLT INSTALL(C), (D) IF

IF PRESENT HOLE IS EMPTY

SUSPENSION

BRACKET

(GT) GARDEN TRACTOR

EXHAUSTTUBES

MUFFLER

BROWNING SHIELD /

SUSPENSION BRACKET

REMOVE BOLT

IF PRESENT

FIGURE 5

6 Call 1-866-576-8388 for missing parts or assembly help

DO NOT RETURN TO STORE

STEP 5: (SEE FIGURE 6)

*Spread ends of bumper enough to fit slots onto bolts

in rear mounting holes in tractor frame.

*The bumper has three mounting holes. The rear

hole provides the most clearance while the forward

holes provide a neater appearance. Use a hole

that provides enough clearance for hood to stay in

raised position when opened. Attach the bumper

using either standard hex bolts and whizlock nuts or

self threading bolts and lock washers. Use the self

threading bolts if standard hex bolts do not insert

freely into the hole in the tractor frame.

iMPORTANT: Before fully tightening bolts, be sure

tractor hood will stay in raised position when opened.

LAWN TRACTOR (LT) SHOWN

GARDEN TRACTOR (GT) iS SIMILAR

WHIZLOCK NUT (D)

FORBOLT(B)

(E)

FIGURE 6

Call 1-866-576-8388 for missing parts or assembly help 7

DO NOT RETURN TO STORE

Your Home

For expert troubleshooting and home solutions advice:

www.managemyhome.com

For repair - in your home - of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

no matter who made it, no matter who sold it!

For the replacement parts, accessories and

owner's manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME ®(1-800-469-4663)

Call anytime, day or night (U.S.A. and Canada)

www.sears.com www.sears.ca

Our Home

For repair of carry-in items like vacuums, lawn equipment,

and electronics, call anytime for the location of your nearest

Sears Parts & Repair Service Center

1-800-488-1222 (U.S.A.)

www.sears.com 1-800-469-4663 (Canada)

www.sears.ca

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.)

Para pedir servicio de reparaci6n

a domicilio, y para ordenar piezas:

1-888-SU-HOGAR ®

1-800-361-6665 (Canada)

Au Canada pour service en fran£ais:

1-800-LE-FOYER M°

(1-800-533-6937)

www.sears.ca

® Registered Trademark /TMTrademark /sMService Mark of Sears Brands, LLC

® Marca Registrada /TM Marca de Fabrica /sM Marca de Servicio de Sears Brands, LLC

Mc Marque de commerce /Marque depos6e de Sears Brands, LLC © Sears Brands, LLC

Indice

Altri manuali Craftsman Accessori

Craftsman

Craftsman 944.511573 Manuale utente

Craftsman

Craftsman 486.24275 Manuale utente

Craftsman

Craftsman 486.24635 Manuale utente

Craftsman

Craftsman 320.16489 Manuale utente

Craftsman

Craftsman 31293 Manuale utente

Craftsman

Craftsman 320.16494 Manuale utente

Craftsman

Craftsman Floor Cabinet Manuale utente

Craftsman

Craftsman 139.53784 Manuale utente

Craftsman

Craftsman 22252 Manuale utente

Craftsman

Craftsman 486.24628 Manuale utente

Craftsman

Craftsman 486.245452 Manuale utente

Craftsman

Craftsman 316.792410 Manuale utente

Craftsman

Craftsman 486.24276 Manuale utente

Craftsman

Craftsman 335.25187 Manuale utente

Craftsman

Craftsman 706.101330 Manuale utente

Craftsman

Craftsman C944.511570 Manuale utente

Craftsman

Craftsman 875.59750 Manuale utente

Craftsman

Craftsman 486.246212 Manuale utente

Craftsman

Craftsman 358.792450 Manuale utente

Craftsman

Craftsman 875.204840 Manuale utente

Craftsman

Craftsman 315.22283A Manuale utente

Craftsman

Craftsman 486.246211 Manuale utente

Craftsman

Craftsman 572.530331 Manuale utente

Craftsman

Craftsman 486.24599 Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente