Craftsman 320.16491 Manuale utente

Operator's Manual

MITER SAW STAND WiTH

ROLLER EXTENSIONS

Model No. 320.16491

WARNING: To reduce the risk of injury,

the user must read and understand the

Operator's Manual before using this product.

A_kWARNING: To reduce the risk of injury,

the user must always read and follow all

instructions in the bench top tool operating

manual before mounting the tool to

this stand.

• WARRANTY

• SAFETY

• ASSEMBLY

• OPERATION

• MAINTENANCE

• ESPANOL

Sears Brands Management Corporation, Hoffman Estates,

IL 60179 U.S.A.

www, ctaftsman,com

Warranty Page 2

Safety Symbols Pages 4-5

Safety Instructions Page 6

Description Page 7

Assembly Pages 7-8

Operation Pages 9-13

Maintenance Page 13

Parts List Pages 14-16

CRAFTSMAN ONE YEAR FULL WARRANTY

FOR ONE YEAR from the date of purchase, this product is warranted

against any defects in material or workmanship. A defective product will be

replaced free of charge.

For warranty coverage details to obtain free replacement, visit the web

site: www.craftsman.com

This warranty is void if this product is ever used while providing commercial

services or if rented to another person.

This warranty gives you specific legal rights, and you may also have other

rights which vary from state to state.

Sears Brands Management Corporation, Hoffman Estates, IL 60179

This miter saw stand has many features for making its use more pleasant and

enjoyable. Safety, performance, and dependability have been given top priority

in the design of this product, making it easy to maintain and operate.

SAVE THESE iNSTRUCTiONS!

READ ALL iNSTRUCTiONS!

Page 2 16491 ManuaLRevised_12 0606

WARNING: Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contains chemicals known to the state of

California to cause cancer, birth defects or other reproductive harm. Some

examples of these chemicals are:

• Lead from lead-based paints,

Crystalline silica from bricks and cement and other masonry products, and

Arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that

are specially designed to filter out microscopic particles.

The purpose of safety symbols is to attract your attention to possible dangers.

The safety symbols and the explanations with them deserve your careful

attention and understanding. The symbol warnings do not, by themselves,

eliminate any danger. The instructions and warnings they give are no substitutes

for proper accident prevention measures.

16491 ManuaLRevised_12 0606 Page 3

_, WARNING: Be sure to read and understand all safety instructions in this

Operator's Manual, including all safety alert symbols such as "DANGER,"

"WARNING," and "CAUTION" before using this tool. Failure to following

all instructions listed below may result in electric shock, fire, and/or serious

personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May

be used in conjunction with other symbols or pictographs.

,_ DANGER: Indicates an imminently hazardous situation, which, if not

avoided, will result in death or serious injury.

_, WARNING: Indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

,_ CAUTION: Indicates a potentially hazardous situation, which, if not avoided,

could result in minor or moderate injury.

Damage Prevention and Information Messages

These inform the user of important information and/or instructions that could

lead to equipment or other property damage if they are not followed. Each

message is preceded by the word "NOTICE," as in the example below:

NOTICE: Equipment and/or property damage may result if these instructions are

not followed.

_, WARNING: To ensure safety and reliability, all repairs should be performed

by a qualified service technician.

,t_ WARNING: The operation of any power tools can result

in foreign objects being thrown into your eyes, which can

result in severe eye damage. Before beginning power tool

operation, always wear safety goggles or safety glasses

with side shield and a full face shield when needed. We

recommend a Wide Vision Safety Mask for use over

eyeglasses or standard safety glasses with side shields.

Always use eye protection which is marked to comply with

ANSI Z87.1.

Page 4 1649:$ ManuaLRevised_12 0606

SAVE THESE iNSTRUCTiONS

Some of the following symbols may be used on this tool. Please study them

and learn their meaning. Proper interpretation of these symbols will allow you to

operate the tool better and more safely.

SYMBOL NAME DESIGNATION/EXPLANATION

V Volts Voltage

A Amperes Current

Hz Hertz Frequency (cycles per second)

W Watt Power

min Minutes Time

Alternating Current Type of current

Direct Current Type or a characteristic of current

n O No Load Speed Rotational speed, at no load

] Class II Construction Double-insulated construction

.../min Per Minute Revolutions, strokes, surface speed,

orbits, etc., per minute

Wet Conditions Alert Do not expose to rain or use in damp

locations.

To reduce the risk of injury, user must

Read The Operator's Manual read and understand operator's manual

before using this product.

O Always wear safety goggles or safety

Eye Protection glasses with side shields and a full face

shield when operating this product.

Alert Precautions that involve

Safety your safety.

Failure to keep your hands away from the

No-Hands Symbol blade will result in serious personal injury.

No-Hands Failure to keep your hands away from the

Symbol blade will result in serious personal injury.

Failure to keep your hands away from the

No-Hands Symbol blade will result in serious personal injury.

Failure to keep your hands away from the

No-Hands Symbol blade will result in serious personal injury.

To reduce the risk of injury or damage,

Hot Surface avoid contact with any hot surface.

16491 ManuaLRevised_12 0606 Page 5

GENERAL POWER TOOL SAFETY WARNINGS

A_, WARNING: Read and understand all instructions. Failure to follow all

instructions in this Operator's Manual may result in electric shock, fire, and/or

serious personal injury.

Save all warnings and instructions for future reference.

READ AND SAVE THESE INSTRUCTIONS

CAUTION: Do not modify the stand or use it for any application other than

that for which it was designed.

= Know your stand. Do not attempt to assemble or operate your miter saw

stand until you have read the safety instructions in this section.

• Only use your miter saw stand on a hard, dry and fiat surface.

• Keep your work area clean and well lit. Cluttered or dark areas

invite accidents.

= Do not overreach. Keep proper footing and balance at all times.

* Do not load the miter saw stand with more than 330 Ibs.

= Store properly. Do not store the miter saw stand outdoors or in a

damp location.

= Do not stand or climb on miter saw stand. It could tip over, causing

serious injury.

*Do not permit children to use the stand unsupervised. It is not a toy.

= Be sure that all locking pins are in the set-up position holes before

using your miter saw and miter saw stand.

= Take care when moving the stand, especially when a miter saw

is mounted.

= Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or long

hair can be caught in moving parts. Always wear non-slip footwear. Tie back

long hair. Roll long sleeves above the elbow.

*Always firmly attach the miter saw used with this stand. Do not attempt

to use your miter saw stand until the miter saw is fastened firmly.

e Be aware of overbalancing. When a large piece is cut from one end of a

workpiece, the remaining piece may be heavy enough to cause the miter

saw stand to tip over. Always ensure that the workpiece is well supported.

= Always keep all guards in place. Be sure that all power tool guards are in

good working order and are in proper adjustment and alignment.

= Always keep your hands away from the cutting area.

Page 6 16491 ManuaLRevised_12 0606

KNOW YOUR MITER SAW STAND (Fig. 1)

Fig. 1 Extension bar Cross support Locking lever

locking knob bar Roller

assembly

mounting brackets

Frame assembly

including legs

Roller-locking

knob

PRODUCT SPECIFICATIONS

Height 32-7/8 inches

Extended width 80 in.

Maximum Load Capacity 330 Ibs

Weight 32.6 Ibs

,_ WARNING: If any parts are broken or missing, do not attempt to operate the

stand until the broken or missing part is replaced. Failure to do so could result in

possible serious injury.

,_ WARNING: Do not attempt to modify this stand or create accessories not

recommended for use with this stand. Any such alteration or modification is misuse

and could result in a hazardous condition leading to possible serious injury.

UNPACKING

* Carefully remove all the parts and accessories from the carton. Make sure

that all items listed in the packing list are included.

* Inspect the stand carefully to make sure that no breakage or damage

occurred during shipping.

16491 Manual_Revised_12 0606 Page 7

* Do not discard the packing material until you have carefully inspected and

satisfactorily operated the stand.

* If any parts are damaged or missing, please return the stand to the place

of purchase.

PACKAGE CONTENTS AND HARDWARE

item Description

Frame assembly,

including legs

Quick-release

mounting bracket

Cross support bar

Support-bar bolt

Support-bar washer

Mounting bolt

Mounting washer

C I°-I 2

D 4

E 4

F 4

G 4

H Spring washer 8

I Nut 8

Extension bar

J locking knob 4

Roller-assembly 2

K locking knob

_}]))]))))))])}]))})}))))))))]))))))_

LRoller assembly

Quantity

Page 8 16491 Manual_Revised_12 0606

AWARNING: Do not use this tool for scaffolding or as a ladder. Make sure to

tighten all locking knobs and levers securely prior to use. Maximum capacity is

330 Ibs. Power tools on the stand should not exceed a combined overall height

of 60 inches from the floor.

SET UP THE STAND

1. Place the frame assembly with

legs (A) upside down on a flat

surface as shown in Fig. 2.

2. To open the top two legs, press

the locking pins and rotate the

legs until the locking pins snap

into the open position and you

hear a "click" to signal that the

legs are locked in place (Fig. 3).

3. Open and lock the other two

legs the same way.

4. Place the frame assembly on a

flat surface as shown in Fig. 4.

MOUNTING A MITER SAW

WARNING: Failure to unplug

the tool before attaching it to the

stand could result in accidental

starting and possibly serious

personal injury.

WARNING: To avoid serious

personal injury,always make sure

that miter saws are fully supported

and securely attached to a level

work surface. If necessary,move

the stand to a location where it will

be more stable.

,_ WARNING: Do not mount

a table saw on this stand. The

direction of feed on a table saw is

perpendicular to the axis of stability

on this stand. Aggressive feeding

of sheet materials into a table saw

could cause the stand to tip over.

Fig. 2

Fig. 4

16491 ManuaLRevised_12 0606 Page 9

Mounting Standard Miter Saws

To The Stand

NOTICE: This allows for the miter

saws on which the 4 mounting

holes form a rectangular pattern

(most miter saws).

1. Mount your miter saw to

the quick-release mounting

brackets (B) using the miter

saw mounting bolts (F),

washers (G), spring washers

(H) and locking nuts (I) (Fig. 5).

2. With the miter saw mounted

on the quick-release mounting

brackets, place the assembly

on the work stand (Fig. 6).

INSTALLING THE

QUICK=RELEASE

MOUNTING BRACKETS

1. Hold the quick-release

mounting bracket (B) by

the handles.

2. Position the area designated

"Z" in Fig. 7 on the frame

assembly (A).

3. Press the handle down to

mount the quick-release

mounting brackets (B).

4. Tighten the locking lever

to lock the mounting

brackets (B) (Fig. 8).

Fig. 5

Fig. 6

Fig. 7 Handle

Fig. 8

locking lever

Page 10 16491 ManuaLRevised_12 0606

Indice

Lingue:

Altri manuali Craftsman Rack e supporto

Craftsman

Craftsman 315.223400 Manuale utente

Craftsman

Craftsman Versatrack Manuale utente

Craftsman

Craftsman 922210 Manuale utente

Craftsman

Craftsman 320.16488 Manuale utente

Craftsman

Craftsman 50159 - 3 Manuale utente

Craftsman

Craftsman 695.22302 Manuale utente

Craftsman

Craftsman 351.241300 Manuale utente

Craftsman

Craftsman 351.220200 Manuale utente

Craftsman

Craftsman 22283A Manuale utente

Craftsman

Craftsman 320.19730 Manuale utente

Craftsman

Craftsman CMXMSAJ94772 Manuale utente

Craftsman

Craftsman 714.58688 Manuale utente

Craftsman

Craftsman 130.16491 Manuale utente

Craftsman

Craftsman 320.22335 Manuale utente

Craftsman

Craftsman 320.16492 Manuale utente

Craftsman

Craftsman CMXMSAJ94773 Manuale utente

Craftsman

Craftsman 320.16490 Manuale utente

Craftsman

Craftsman 320.22305 Manuale utente

Craftsman

Craftsman CMXMSAJ094788 Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente