Crane Song IBIS Manuale utente
LTD.
2117 East 5th Street
Superior, WI 54880 USA
tel: 715-398-3627
fax: 715-398-3279
www.cranesong.com
OPERATOR'S MANUAL
Version (-1)
Dec 1, 2007
© 2007 Crane Song, LTD. Subject to change without notice. Printed in the U.S.A.
The basics
The IBIS equalizer can do some very different things.
First, each band has 24 frequencies. 12 switch positions and a “+ one step button” this
button moves the frequencies up one whole musical step. The high and low bands also
can be shelving by pushing the shelving button.
The frequency chart showes how each of the bands over lap and how frequencies and
musical notes relate. As an example, with the +1 step button pushed in, the frequency
moves up two positions on the chart. 32.7 Hz which is the lowest frequency will become
36.7 Hz
There is a dead zone of about plus and minus .3 db on the “boost / cut” controls where the
EQ is flat in response. This allows an easy way to set your bands flat. The range is plus
or minus 12 db and is not stepped. The mastering version has a range of 6 db in .5 db
steps with a 1 db step between 5 and 6.
The Bandwidth is not stepped on the standard version and is steped on the mastering
version. the range is from 0.2 Oct to 4 Oct this is at 12 db of boost
The low cut is 12 db per octave, but the steep button increases the slope to 24 db per
octave.
The filters are of a special type that provide a very clean and smooth sound. To add
flexibility to the equalizer a color knob is inculuded.
The color knob is an additive second / third harmonic distortion type of process,
it can be applied to the full program or any one of the 4 bands. When doing a “cut” it will
subtract the harmonic content. The Color Knob is not stepped on the standard version
and is stepped on the mastering version
The use of the color function will allow you to change the equalizer from a very transparent
sound to a colored sound. Using it on the low frequencies, band 1, it will add warmth. On
band 3 it will add presence and some nice upper midrange detail. On the high frequency
band it will add air.
C
32.7
65.4
131
262
523
1047
2093
4186
8372
16744
34.6
69.3
139
277
554
1109
2218
4435
8869
17740
36.7
73.4
147
294
587
1175
2349
4699
9397
18794
38.9
77.8
155.6
311
622
1245
2489
4978
9956
19912
41.2
82.4
165
330
659
1319
2637
5274
10548
21096
43.7
87.3
175
349
698
1397
2794
5588
11175
740
1480
2960
5920
11839
784
1568
3136
6272
12544
830
1661
3322
6645
13289
880
1760
3520
7040
14080
932
1865
3729
7459
14917
988
1976
3951
7902
15804
C# D D# E F F# G G# A A# B
46.2
92.5
185
370
49
98
196
392
51.9
104
208
415
55
110
220
440
58.3
116.6
233
466
61.7
123.5
247
494
IBIS FREQUENCY CHART
Band 1 + 1 step lowest frequency is 36.7 Hz
Band 2 + 1 step lowest frequency is 155 Hz
Band 3 + 1 step lowest frequency is 523 Hz
Band 4 + 1 step lowest frequency is 1760 Hz
IBIS INSERT CONNECTOR
If you are going to use this, use it with caution. The inserts are a loop and must be normaled for the
band to work correctly. If there is a phase inversion in the inserted device it is possible that the sys-
tem will be an oscillator. This will not hurt Ibis, but your Speakers.
boost / cut amp
filter
Send
Return
Insert
IBIS INPUT IBIS OUTPUT
There are 4 filter circuits in parallel in Ibis. When using the insert with a compressor you are modifing
the filter output before is sums back into the audio path. The inserts are unbalanced
INTERFACING
Input: Floating, balanced. Maximum input is +25 dBm.
The connectors are XLR.
Output: Floating, balanced. Maximum output is +25 dBm.
The connectors are XLR.
For Input and Output : Pin 2 is Sig + , Pin 3 is Sig- , Pin 1 is GND
Power: 100, 120, 230,240 volt; 50/60 Hz; 55 watts
MDL .6A Fuse for 100V and 120V
MDL .3A Fuse for 230V and 240V
Pilot Lamp: # 327
Shipping
Weight: 19 lbs. (8.6 kg)
Depth
Behind Panel: 12.5 inches (31.75 cm) plus cabling
Panel Height: 2 rack spaces
Altri manuali per IBIS
1
Indice
Altri manuali Crane Song Equalizzatore stereo
