Crest Electronics CDVS-7000 Manuale utente

CDVS-7000 Series

DVR Setup And

Users Manual

Crest Electronics, Inc.

Version 02.28.06

Caution

This installation should be performed by qualiﬁed service personnel and should conform to all Federal, State

and local laws.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates and uses radio

frequency energy, and if not installed and used in accordance with instructions, may cause harmful

interference to radio communications. However, there is no guarantee that the interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one of the following methods:

- Relocate the receiving antenna

- Increase the amount of space between the equipment and the receiver.

- Connect the equipment to an outlet which is on a separate circuit than that of the

receiver.

- Consult the dealer or an experienced radio/TV technician for help

CAUTION: Changes or modiﬁcations not expressly approved by the party responsible for compliance

with the FCC Rules could void the user’s authority to operate this equipment.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK. DO NOT REMOVE COVER. NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning ﬂash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated dangerous voltage within the

product’s enclosure that may be of sufﬁcient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE

Important Safeguards

Warning

1. Turn off power to the unit prior to changing the battery.

2. Check the polarity of the lithium battery while changing.

3. When changing battery use the same type as original or similar type recommended by your vendor.

4. Dispose of old battery in accordance with the manufacturer of the battery.

General Warning

Warning

1. Use the power cord, which is supplied or recommended by the manufacturer. Failure to do so could cause

a ﬁre.

2. Use the power transformer, which is supplied or recommended by the manufacturer. Failure to do so

could cause a ﬁre.

3. Do not dismantle or assemble the product. Doing so could cause malfunction or ﬁre.

4. Service should only be done by manufacturer or authorized vendor. Electrical shock or ﬁre could result if

repair is not done properly.

5. Do not touch product with wet hands as electric shock may occour.

6. Product must be installed by a qualiﬁed professional. Failure to do so could result in malfunction,

electrical shock or ﬁre.

7. Consult the place of purchase if the need for installation arises. Poor installation could cause

malfunction, electric shock or ﬁre.

8. Ground applies to video products equipped with a 3-wire grounding type plug having a third (grounding)

pin. This plug only ﬁts into a grounding type power outlet. If grounding is not done, equipment malfunc

tion or electric shock may occur.

9. Ground connection must not touch gas pipe, water pipe or telephone lines.

10.Prevent foreign metallic substance from going inside the product. Failure to do so could result in mal

function or electric shock.

11. Prevent water or other liquids from entering inside the product. Use damp cloth to clean outside of

product. Failure to do so could result in malfunction or electric shock.

iii

Caution

1. Use the power cord and power transformer supplied by the manufacturer or one recommended by the

manufacturer.

2. The internal fan rotates at high speed and may cause injury.

3. Do not drop, give unit strong vibration or shock to the product; doing so will cause malfunction.

4. Slots and openings in the front and back of the cabinet are provided for ventilation, to ensure reliable

operation of the unit, and to protect it from overheating. These openings must not be blocked or covered.

The openings should never be blocked by placing the unit on a bed, sofa, rug or similar surface. The unit

should never be placed near or over a radiator or heat source. This unit should not be placed in a built-

in installation such as a bookcase or rack unless proper ventilation is provided and/or the manufacturer’s

instructions are adhered to.

5. Do not install the product near or on top of heating source. The internal temperature of the product would

be greater than the allowable and could cause malfunction or ﬁre.

6. Do not install the product on inclined or unstable locations such as an unstable cart, slant tripod, bracket,

or table. The unit may fall, causing serious injury, and serious damage to the unit.

Cautions about the Power

Warning

1. This unit should be operated only from the type of power indicated on the power plate. If you are not

sure of the type of power supply at your location, consult your dealer or local power company. For units

intended to operate from battery power, or other sources, refer to the operating instructions.

2. Power supply cords should be routed so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to the cord at plugs, convenience receptacles,

and the point where they exit from the appliance.

3. Do not cut power cord to connect in the middle of the power cord or use extension cord. Doing so could

generate heat or cause ﬁre.

4. Do not touch power cord in wet area or with wet hands.

5. Hold the body of the plug when removing the power cord. Do not pull cord as doing so may generate

heat or cause ﬁre.

6. Remove the power cord from the outlet when not in use for long periods of time. This will prevent

damage to unit due to lightning and power line surges.

Contents

Chapter 1

Overview of Main Screen

Image Display Area ............................................................................... 1-1

Camera Display Buttons ............................................................................... 1-2

Display Next Screen Button ............................................................................... 1-3

Auto Rotate ............................................................................... 1-3

Full Screen Mode ............................................................................... 1-3

Snapshot Button ............................................................................... 1-4

Live Audio Button ............................................................................... 1-4

Audible Alarm Mute Button ............................................................................... 1-4

Current Date and Time ............................................................................... 1-5

Change Date and Time ............................................................................... 1-5

Camera Display Bar ............................................................................... 1-6

User Log On ............................................................................... 1-6

Network Connection Button ............................................................................... 1-7

Relay/Control Button ............................................................................... 1-7

Sensor Button ............................................................................... 1-7

Channel Swapping ............................................................................... 1-8

Partial Zoom ............................................................................... 1-8

Quick Search Function ............................................................................... 1-9

Quick search by date and time ............................................................................... 1-10

Image Screen Pop Up Menu ............................................................................... 1-10

Search Menu Button ............................................................................... 1-11

Setup Menu Button ............................................................................... 1-11

Motion Setup Button ............................................................................... 1-11

Emergency Record Button ............................................................................... 1-12

PTZ Button ............................................................................... 1-12

E-map Button ............................................................................... 1-12

Chapter 2

Search Screen Functions

Search Screen Menus ............................................................................... 2-1

Using the Search Screen ............................................................................... 2-2

Playback Screen ............................................................................... 2-2

Screen Swapping ............................................................................... 2-2

Playback Screen Shortcuts ............................................................................... 2-3

Partial Zoom ............................................................................... 2-3

Section Color ............................................................................... 2-4

Brightness Mode ............................................................................... 2-4

Invert Mode ............................................................................... 2-4

Field Mode ............................................................................... 2-5

Screen Division ............................................................................... 2-5

Full ............................................................................... 2-5

Exit ............................................................................... 2-5

Screen Display Buttons ............................................................................... 2-6

Playback Control Buttons ............................................................................... 2-6

Camera Selection Buttons ............................................................................... 2-6

Speed, Brightness, Contrast, & Audio Control ...................................................... 2-7

Zoom ............................................................................... 2-7

Date Calendar ............................................................................... 2-7

Time Control Bar ............................................................................... 2-8

Exit Button ............................................................................... 2-8

Chapter 3

Backing up Data on the CDVS-7000 Series DVR

Navigating to the Backup Menu ............................................................................... 3-1

Using Smart Backup ............................................................................... 3-2

Detail Description of the Smart Backup Screen ..................................................... 3-3

Recorded Data Screen ............................................................................... 3-3

Step By Step Examples of Smart Backup ................................................................. 3-8

AVI Backup ............................................................................... 3-18

Media Backup ............................................................................... 3-19

AVI Capture ............................................................................... 3-21

JPG Capture ............................................................................... 3-21

Event Search ............................................................................... 3-23

Log Viewer ............................................................................... 3-25

Motion Search ............................................................................... 3-27

Data Path ............................................................................... 3-32

Bookmark ............................................................................... 3-33

Watermark ............................................................................... 3-33

Snapshot ............................................................................... 3-34

Chapter 4

SYSTEM SETUP

Camera Setup ............................................................................... 4-1

Import/Export ............................................................................... 4-4

Sensor Setup ............................................................................... 4-5

Relay Setup Window ............................................................................... 4-7

Recording Schedule Setup Window ........................................................................ 4-9

Network Setup Window ............................................................................... 4-19

User Setup Window ............................................................................... 4-22

Information Window ............................................................................... 4-25

iii

Chapter 5

PTZ Function

PTZ connection ............................................................................... 5-1

PTZ Function Controls ............................................................................... 5-2

Preset Tour Setup Screen ............................................................................... 5-4

Controlling e PTZ Camera ............................................................................... 5-6

Setting Presets ............................................................................... 5-7

Calling a Preset ............................................................................... 5-7

Chapter 6

Backup Player

Backup Player ............................................................................... 6-1

Overview of the Backup Player Screen .................................................................... 6-3

Functions Buttons ............................................................................... 6-4

Playback Controls ............................................................................... 6-4

Date Calendar ............................................................................... 6-5

Time Control Bar ............................................................................... 6-5

Zoom ............................................................................... 6-6

Using Data Path ............................................................................... 6-6

Partial Zoom ............................................................................... 6-7

Field Mode ............................................................................... 6-9

Screen Division ............................................................................... 6-9

Full ............................................................................... 6-9

Exit ............................................................................... 6-9

Backup Function ............................................................................... 6-10

AVI Backup ............................................................................... 6-10

Media Backup ............................................................................... 6-11

AVI Capture ............................................................................... 6-13

Chapter 1

Overview of Main Screen

1-1

Overview of Main Screen

This section describes the main screen and its menu buttons. The image below details the name

of the buttons.

Image Display Area

The image display area displays the live images of the current cameras. This display can be

changed by clicking on the screen division buttons (see screen division section on the different

views available). To change the screen from multi camera view to single camera view, double

click the left mouse button in the image you want to bring up in single view, or click in the image

making it the selected camera (will be highlighted in red), then click the single camera division

button. To change back, double click within the image. Each image displays the camera name

and the recording mode in use at the top of every image. The various modes are: C - Continuous

recording, S - Sensor recording, M - Motion recording, MS - Motion and Sensor recording, N

- No recording. (To change these settings please see Scheduling in Chapter 4, System Setup)

Screen Division and control

Network Connections

Relays

Sensors

Current Date and Time

Setup

Motion

Emergency record

PTZ control and setup

E-Map

Snapshot

Audio on/off

Mute Alarm

System Exit

User Logon

Recording Mode

Display Camera Selection

Image Display Area

1-2

Camera Display Buttons

The following is a description of the different views available in the Crest CDVS-7000 series

DVR software.

This will allow the user to view only one camera at a time. To view a single camera, left click

highlighting the desired camera in a red outline. Next, left click the single camera display button.

The selected camera will replace the current view with a single camera view. To have the sys-

tem rotate from one camera to another, click the Next button. To have the system automatically

change from one camera to another, click the Auto Rotate button (see below).

4 Camera Display Button

This will allow the user to view four cameras at a time. The system displays the cameras in

the following conﬁgurations: cameras 1,2,3,4, cameras 5,6,7,8, cameras 9,10,11,12, cameras

13,14,15,16. To have the system rotate from one 4 camera view to another, click the Next but-

ton. To have the system automatically change from one 4 camera view to another, click the Auto

Rotate button (see below).

6 Camera Display Button

This will allow the user to display six cameras at a time. The different conﬁgurations are: camer-

as 1 - 6, 7 - 12, and 11 - 16. To view, click on one of the cameras you want to view and click the

6 camera display button. To have the system rotate from one 6 camera view to another, click the

Next button. To have the system automatically change from one 6 camera view to another, click

the Auto Rotate button (see below).

9 Camera Display Button

This will allow the user to display nine cameras at a time. The different conﬁgurations are:

cameras 1 - 9, and 8 - 16. To view, click on one of the cameras you want to view and click the 9

camera display button. To have the system rotate from one 9 camera view to another, click the

Next button. To have the system automatically change from one 9 camera view to another, click

the Auto Rotate button (see below).

Single Camera Display Button

Altri manuali per CDVS-7000

Indice

Altri manuali Crest Electronics Registratore digitale

Crest Electronics

Crest Electronics CDVS-7000 Manuale utente

Crest Electronics

Crest Electronics CDR-1104 Manuale utente

Crest Electronics

Crest Electronics CDVS-5400 SERIES Manuale utente

Crest Electronics

Crest Electronics CDVS-5000 Series Manuale utente

Crest Electronics

Crest Electronics CDVS-7000 Manuale utente

Crest Electronics

Crest Electronics CDVS-4100 Series Manuale utente

Crest Electronics

Crest Electronics CDR-1104 Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente