Crestron C2N-DEMO-INTERFACE Manuale utente

Crestron C2N-DEMO

Interface Case

Reference Guide

This document was prepared and written by the Technical Documentation department at:

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

1-888-CRESTRON

All brand names, product names, and trademarks are the property of their respective owners.

Crestron C2N-DEMO Interface Case Demonstration Case

Contents

Crestron Demonstration Case: C2N-DEMO Interface Case

Introduction ...............................................................................................................................1

Features and Functions................................................................................................1

Case Contents..............................................................................................................2

Setup............................................................................................................................2

System Functionality .................................................................................................................4

CNX-B2 ......................................................................................................................4

CNX-B4 ......................................................................................................................5

CNX-B6 ......................................................................................................................6

CNX-B8 ......................................................................................................................7

CNX-B12 ....................................................................................................................8

C2N-DB6 ..................................................................................................................10

C2N-DB8 ..................................................................................................................11

C2N-DB12 ................................................................................................................12

Touchpanel Interfaces ...............................................................................................13

Appendix: Factory Settings ....................................................................................................14

Return and Warranty Policies..................................................................................................15

Merchandise Returns / Repair Service ......................................................................15

CRESTRON Limited Warranty ................................................................................15

Reference Guide – DOC. 6281 Contents •i

Crestron C2N-DEMO Interface Case Demonstration Case

Crestron Demonstration Case:

C2N-DEMO Interface Case

Introduction

Features and Functions

The Crestron®C2N-DEMO Interface Case (herein known as the Interface Case) is a

pre-programmed Crestron system in a portable case. It is designed with the sales

person in mind to give customers an understanding of how Crestron keypads and

touchpanel interfaces can be incorporated into their audio-visual and automation

systems. The Interface Case is programmed to demonstrate many of the most

common functions that Crestron interfaces can perform. However, it is up to you, as

a sales person, to spark their imagination as to how these devices can best work in

each custom solution.

The Crestron C2N-DEMO Interface Case (Opened)

NOTE: The Interface Case can operate as a stand-alone demonstration tool or in

conjunction with the Crestron C2N-DEMO Lighting Case.

Reference Guide – DOC. 6281 Crestron Demonstration Case: C2N-DEMO Interface Case •1

Demonstration Case Crestron C2N-DEMO Interface Case

Case Contents

The following table summarizes the products contained within the Interface Case.

Contents of the Interface Case

MODEL DESCRIPTION QTY

CNX-B2 2-Button Designer Ketpad 1

CNX-B4 4-Button Designer Keypad 1

CNX-B6 6-Button Designer Keypad 1

CNX-B8 8-Button Designer keypad 1

CNX-B12 12-Button Designer Keypad 1

C2N-DB6 6-Button Decorator Keypad 1

C2N-DB8 8-Button Decorator Keypad 1

C2N-DB12 12-Button Decorator Keypad 1

CT-1000 4-Inch Compact Wall Mounted Touchpanel 1

TPS-2000L 5-Inch Compact Wall Mounted Touchpanel 1

CHV-THSTAT Heating, Cooling, Relative Humidity Thermostat 1

CHV-RTHS Remote Temperature and Hunidity Sensor 1

MC2E 2-Series Control Processor with Ethernet 1

CNPWS-75 75-Watt Power Supply 1

B-G1-FPAR Architectual Keypad Faceplate 3

CT/LC-FP-S/STEEL Stainless Faceplate with Black Trim 1

NOTE: The Interface Case also contains a CLW-DIMW and CLW-SWSW ganged

together for visual inspection only. These devices are not programmed.

The Interface Case ships with three cables:

• Power Cord

• Cross-over Cable

• RCA to RCA Video Cable

Setup

Complete the following steps to setup your portable Interface Case.

1. Apply Power

Open the case lid, simply plug the supplied power cord into the case,

and then into a standard 120 VAC wall receptacle.

2. Connect Video

Attach one end of the RCA to RCA video cable to the port in the

Interface Case and the other end to a video source.

NOTE: The following step describes the IP setup for a WindowsXP operating

system. The procedure may vary slightly for other systems.

3. Set IP Address

To setup the static IP address for your laptop, go to Start | Settings |

Control Panel and double click Network Connections.

2 •Crestron Demonstration Case: C2N-DEMO Interface Case Reference Guide – DOC. 6281

Crestron C2N-DEMO Interface Case Demonstration Case

Right click on the icon for your Ethernet adapter and select Properties.

Highlight the Internet Protocol (TCP/IP) selection and click the

Properties button.

Select the radio button labeled Use the following IP address: and enter

in the following information.

“Internet Protocol (TCP/IP) Properties” Window

Click on OK to exit and save settings.

4. Ethernet Cable

Connect the supplied Ethernet cross-over cable between the Interface

Case’s Ethernet port and the Ethernet port on your laptop.

NOTE: Unless you have a hub, a standard Ethernet cable does not work when

connecting the Interface Case to your laptop.

5. Web Page

Open Internet Explorer on your laptop and type in the following

address: http://192.168.40.11.

Reference Guide – DOC. 6281 Crestron Demonstration Case: C2N-DEMO Interface Case •3

Demonstration Case Crestron C2N-DEMO Interface Case

System Functionality

This section describes each interface and how it is intended to function. This

information should be useful in how you approach your sales presentation, enabling

you to concentrate on the features most relevant to your customer.

CNX-B2

2.9119"

1.5360"

4.7619"

1.0670"

DINNER

PARTY

MUSIC

1.536 2.912

1.067

4.762

This interface was programmed as a secondary interface for the dining room in this

system. The entire virtual house can be monitored from the web page project

associated with this system.

Button 1 (DINNER PARTY)

This button controls two separate lighting scenes. If pressed and released within two

seconds, it turns the dining room lights to a preset level. If pressed and held for

longer than two seconds, it turns all the lights in this area to their off state.

Button 2 (MUSIC)

When this button is pressed the first time, it turns on the virtual audio system. Each

additional press of the button scrolls through the sources. In order to better

demonstrate this function, audio files have been stored to announce what source is

currently active. The audio level is adjusted from the other dining room keypad (the

CNX-B8).

4 •Crestron Demonstration Case: C2N-DEMO Interface Case Reference Guide – DOC. 6281

Crestron C2N-DEMO Interface Case Demonstration Case

CNX-B4

LIGHTS

TEMP

2.9119"

1.5360"

4.7619"

1.0670"

1.536 2.912

1.067

4.762

LIGHTING

OVERRIDE

TEMP

This interface was programmed as a secondary interface for the master bedroom.

The entire virtual house can be monitored from the web page project associated with

this system.

Button 1 (LIGHTS)

This button turns the master bedroom lights to a preset level. The LED feedback

light illuminates when this level is obtained.

Button 2 (LIGHTING OVERRIDE)

This button only shows toggling feedback in the stand-alone configuration, but

allows for some discussion on the redundancy features of Crestron lighting systems.

This button has more functionality when used in conjunction with the Crestron C2N-

DEMO Lighting Case.

Button 3 (

TEMP)

This button changes the CHV-THSTAT’s set point up by one degree with each

press. Have your customer watch the front panel display of the thermostat or one of

the graphical user interfaces as they display the same data. Keep in mind that the

thermostat is rounding up or down its temperature value for display purposes, but the

interfaces show the value at a one tenth degree resolution.

Button 4 (TEMP

)

This button functions the same as KTEMP, but increments the set point down.

Reference Guide – DOC. 6281 Crestron Demonstration Case: C2N-DEMO Interface Case •5

Demonstration Case Crestron C2N-DEMO Interface Case

CNX-B6

MORNING

1.067

2.9119"

1.5360"

4.7619"

1.0670"

2.912

1.536

4.762

EVENING

VANITY DOWN

LIGHTS

FAN ALL

OFF

This interface was programmed as the primary control point for the guest bathroom.

The entire virtual house can be monitored from the web page project associated with

this system.

Button 1 (MORNING)

This button turns the guest bathroom lights to a preset level. The LED feedback light

illuminates when this level is obtained.

Button 2 (EVENING)

This button turns the guest bathroom lights to a preset level. The LED feedback light

illuminates when this level is obtained.

Button 3 (VANITY)

This button toggles the vanity lights off and on with a two second fade time. The

feedback LED illuminates anytime the light level is greater than 0%.

Button 4 (DOWN LIGHTS)

This button toggles the down lights off and on with a two second fade time. The

feedback LED illuminates anytime the light level is greater than 0%.

Button 5 (FAN)

This button turns on the bathroom exhaust fan for 30 seconds. While the fan is on,

the feedback LED flashes (on and off) approximately every 0.5 seconds. The button

can be re-triggered at any time to restart the 30-second countdown. Explain to your

customer that 30 seconds is just an arbitrary number and can be set to whatever time

makes sense in their application.

Button 6 (ALL OFF)

This button turns all guest bathroom lights off over a two second period. It does not

alter the exhaust fan operation.

6 •Crestron Demonstration Case: C2N-DEMO Interface Case Reference Guide – DOC. 6281

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Crestron Allegato

Crestron

Crestron DIN-EN Series Manuale utente

Crestron

Crestron TSW-770-FP Manuale utente

Crestron

Crestron BB-5000 Manuale utente

Crestron

Crestron BB-17L Manuale utente

Crestron

Crestron BB-15L Manuale utente

Crestron

Crestron BB-2000L Manuale utente

Crestron

Crestron BB-6000 Manuale utente

Crestron

Crestron BB-3100L Manuale utente

Crestron

Crestron C2N-DEMO-LIGHTING Manuale utente

Crestron

Crestron BB-1700CW Manuale utente

Crestron

Crestron CAEN Manuale utente

Crestron

Crestron BB-4L Manuale utente

Crestron

Crestron Automation Enclosures CAEN Series Manuale utente

Crestron

Crestron BB-4000L Manuale utente

Crestron

Crestron BB-12L Manuale utente

Crestron

Crestron BB-4L Manuale utente

Crestron

Crestron MPB3-TTK-SQR Manuale utente

Crestron

Crestron BB-1600 Manuale utente

Crestron

Crestron ZUMMESH-JBOX-FMKT-CP Manuale utente

Crestron

Crestron BB-3000L Manuale utente

Crestron

Crestron CAGE3 Manuale utente

Manuali Allegato popolari di altre marche

SilentiumPC

SilentiumPC Armis AR5 Manuale

Pulsar

Pulsar 17/TRP80/DSPR Manuale utente

Thermaltake

Thermaltake V150 TG Manuale utente

MSI

MSI MPG SEKIRA 500X Manuale utente

Antec

Antec Dark fleet DF-10 Manuale utente

Nexans

Nexans WTC05 Manuale utente

Peavey

Peavey DS 1502 Manuale utente

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuale utente

Rosewill

Rosewill RX82-U(JBOD) Manuale utente

QNAP

QNAP SAS JBOD CLI 1.0 Manuale utente

GAMDIAS

GAMDIAS Talos P1 Manuale utente

Auvs

Auvs KR615 Manuale utente

Digitus

Digitus DA-71114 Manuale utente

CommScope

CommScope FDH 3000 Manuale utente

FS FHD-FWME4 Manuale utente

JBL

JBL CS1215T Manuale utente

Pulsar

Pulsar ARAD-S4 Manuale utente

Pulsar

Pulsar AWO454 Manuale utente