Crestron TSW-732 Manuale del proprietario

TSW-732

7" Room Scheduling Touch Screen

Supplemental Guide

Crestron Electronics, Inc.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a limited non-exclusive,

non-transferable Software Development Tools License Agreement. Crestron product operating system software is licensed to Crestron

dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these Agreements can be found on the Crestron

website at www.crestron.com/legal/software_license_agreement.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, and Rava are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or

other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is

not responsible for errors in typography or photography.

This document was written by the Technical Publications department at Crestron.

Supplemental Guide – DOC. 7669A Contents

•

Contents

Access the Setup Screens 1

Configure the TSW-732 2

Ethernet Setup ........................................................................................................ 2

IP Table Setup ........................................................................................................ 3

Audio Setup ............................................................................................................ 5

Display Setup.......................................................................................................... 6

Standby Timeout..................................................................................................... 7

Diagnostics ............................................................................................................. 8

Keypad Test............................................................................................... 8

Touch Test................................................................................................. 9

Sensor Test................................................................................................ 9

Mic Test ................................................................................................... 10

LAN Test.................................................................................................. 10

Test Patterns............................................................................................ 11

Rava Test................................................................................................. 11

RTSP Test................................................................................................ 12

About .................................................................................................................... 13

Save & Edit ........................................................................................................... 13

Supplemental Guide – DOC. 7669A TSW-732: 7˝Room Scheduling Touch Screen

•

TSW-732:

7" Room Scheduling Touch Screen

Access the Setup Screens

The setup screens enable basic configuration prior to regular operation of the TSW-732

from Crestron®. To display the main setup screen, touch the screen while applying power to

the unit.

NOTE:

If no project has been loaded or if an invalid project has been loaded, the touch

screen defaults to the main setup screen.

During regular operation of the TSW-732, there are two ways to access the setup screens:

1. Place a button on the project main page and assign the reserved join number

(17242) that accesses the setup screens.

2. Press hard keys 1, 2, 3, and 4 to the left of the touch screen display in sequence,

twice (press 1, 2, 3, 4, 1, 2, 3, 4) within a 5-second period.

The

TSW-732 Setup

screen is displayed.

TSW-732 Setup Screen

The

TSW-732 Setup

screen is composed of buttons for Ethernet setup, IP table setup,

audio setup, display setup, standby timeout, and diagnostics. In addition, there are buttons

to toggle user project mode and system messages on or off. An

About

button provides

information about the touch screen, and a

Save & Exit

button saves settings and exits the

setup screens. The functions of each are detailed in the following pages of this guide.

•

TSW-732: 7˝Room Scheduling Touch Screen Supplemental Guide – DOC. 7669A

Configure the TSW-732

Ethernet Setup

On the

TSW-732 Setup

screen, tap

Ethernet Setup

to display the

Ethernet Setup

screen.

Ethernet Setup Screen

The

Ethernet Setup

screen displays the TSW-732’s MAC and IP addresses, subnet mask,

default router, primary and secondary DNS, hostname, and domain. There are controls for

turning DHCP on and off. When DHCP is off, a

Set Static IP Address Settings

button

provides access to controls that allow editing of these settings. This screen also contains a

link indicator to show the status of the Ethernet connection.

DHCP is enabled by default. To change to a static IP address, tap

Off

under

DHCP

Enabled

, and then tap

Set Static IP Address Settings

to display the

Ethernet Setup -

Static IPs

screen.

Ethernet Setup - Static IPs Screen

To edit the static IP address, static subnet mask, static default router, preferred DNS, or

alternate preferred DNS, tap the button directly under the label for the entry. The on-screen

numeric keypad opens.

Supplemental Guide – DOC. 7669A TSW-732: 7˝Room Scheduling Touch Screen

•

On-Screen Numeric Keypad

Use the keypad to make the new entry. Tap the “x” in the text field to clear any previous

entry. Tap to delete the last digit. Tap

Save

to save a new entry or to return

to the

Ethernet Setup - Static IPs

screen.

After new settings have been saved, tap

Reboot

on the

Ethernet Setup - Static IPs

screen

to reboot the TSW-732 so the new settings can take effect.

If not making any changes, tap to return to the

Ethernet Setup

screen.

Tap again to return to the

TSW-732 Setup

screen.

IP Table Setup

On the

TSW-732 Setup

screen, tap

IP Table Setup

to display the

Ethernet Setup - IP

Table

screen.

Ethernet Setup - IP Table Screen

The

Ethernet Setup - IP Table

screen displays up to four IP table settings, each of which

has an

Online

indicator. To add or edit an entry, tap the

Add/Edit

button to its left. The

Ethernet Setup - Edit IP Table Entry

screen is displayed.

•

TSW-732: 7˝Room Scheduling Touch Screen Supplemental Guide – DOC. 7669A

Ethernet Setup - Edit IP Table Entry Screen

Tap the field below

CIP ID

to display the on-screen hex keypad.

On-Screen Hex Keypad

Use the keypad to make the new entry. Tap the “x” in the text field to clear any previous

entry. Tap to delete the last digit. Tap

Save

to save a new entry or to return

to the

Ethernet Setup - Edit IP Table Entry

screen.

Tap the field below

IP Address/Hostname

to display the on-screen keyboard.

Supplemental Guide – DOC. 7669A TSW-732: 7˝Room Scheduling Touch Screen

•

On-Screen Keyboard

Use the keyboard to make the new entry. Tap

Cancel

to return to the

Ethernet Setup -

Edit IP Table Entry

screen. Tap the “x” in the text field to clear any previous entry. Tap

to delete the last digit. Tap

Save

to save a new entry and return to the

Ethernet

Setup - Edit IP Table Entry

screen.

On the

Ethernet Setup - Edit IP Table Entry

screen, tap

Save Entry

to save the current

entry or

Delete Entry

to clear it.

If not making any changes, tap to return to the

Ethernet Setup - IP Table

screen.

Tap again to return to the

TSW-732 Setup

screen.

Audio Setup

On the

TSW-732 Setup

screen, tap

Audio Setup

to display the

Audio Setup

screen.

Audio Setup Screen

The

Audio Setup

screen provides controls for muting or unmuting the audio and for

adjusting levels for the master volume, media volume, and beep volume. The

Media

•

TSW-732: 7˝Room Scheduling Touch Screen Supplemental Guide – DOC. 7669A

Volume

controls adjust the H.264 streaming media level in relation to the

Master Volume

controls.

Tap to return to the

TSW-732 Setup

screen.

Display Setup

On the

TSW-732 Setup

screen, tap

Display Setup

to display the

Display Setup

screen.

Display Setup Screen

The

Display Setup

screen provides controls to adjust the screen’s LCD brightness, green

key brightness, and red key brightness. Controls are also provided to enable using a hard

key or proximity sensor to wake the LCD. In addition, there are controls for the keys on the

left and right sides of the display. The controls turn the hard key lights on and off and toggle

the key colors between red and green.

Tap to return to the

TSW-732 Setup

screen.

Altri manuali per TSW-732

Indice

Altri manuali Crestron Pannello touch

Crestron

Crestron TSW-570 Manuale utente

Crestron

Crestron DualTouch DTT-15V3 Manuale utente

Crestron

Crestron Isys TPS-12 Manuale utente

Crestron

Crestron ST-1700CIR Manuale utente

Crestron

Crestron ST-1550 Manuale utente

Crestron

Crestron SmarTouch ST-1700C Manuale utente

Crestron

Crestron TPMC-10 Manuale utente

Crestron

Crestron Isys i/O TPMC-4X Manuale utente

Crestron

Crestron TPMC-3X Series Manuale utente

Crestron

Crestron TPS-4500IMC Manuale utente

Crestron

Crestron Lsys TPS 2000L Manuale utente

Crestron

Crestron CT-1600 Come usare

Crestron

Crestron TSW-560 Manuale utente

Crestron

Crestron Isys i/O TPMC-15-CH Manuale utente

Crestron

Crestron TSW-570P Manuale utente

Crestron

Crestron TSW-560 Manuale del proprietario

Crestron

Crestron TSW-550-TTK Disegno dimensionale

Crestron

Crestron Isys TPS-4000 Manuale utente

Crestron

Crestron SmarTouch STS ST-1550C Manuale utente

Crestron

Crestron TSW-560 Manuale del proprietario

Crestron

Crestron Isys TPS-3000 Manuale utente

Crestron

Crestron TPS-FPAR5000L Manuale utente

Crestron

Crestron TSW-560 Disegno dimensionale

Crestron

Crestron Isys TPS-3100L Manuale utente

Manuali Pannello touch popolari di altre marche

FlowLine

FlowLine Data loop Manuale utente

ALPEX

ALPEX AEx-8 P Series Manuale utente

Ltech

Ltech E5S Manuale utente

Harman

Harman AMX MODERO S MSD-701-L2 Manuale utente

Acnodes

Acnodes PC 1150 Manuale utente

AIS

AIS IP10IA99 series Manuale utente

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuale utente

YASKAWA

YASKAWA TP 610C Manuale utente

B&R

B&R Power Panel C Series Manuale utente

Beijer Electronics

Beijer Electronics X2 control Manuale utente

AXIOMTEK

AXIOMTEK GOT321W-521 Manuale utente

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuale utente

Qomo

Qomo QIT1386 Manuale utente

DFI

DFI KS104-CD Manuale utente

AMX

AMX AXP-PPC Guida

Sartorius

Sartorius X3 PR 5410 Manuale utente

AMX

AMX Modero X Series Manuale utente

Advantech

Advantech TPC-30 Series Manuale utente