MODEL 1100
I. SAFETY ALERT SYMBOL
II. SAFETY FIRST
The information in this manual is essential for the safe installation and
operation of your Cretors machine. The manual must be read and
understood before installing, and operating the equipment, or equivalent
training must be provided.
“The employer shall instruct each employee in the recognition and
avoidance of unsafe conditions, as well as, the regulations applicable to
his work environment and to control or eliminate any hazards or other
exposure to illness or injury”. Ref.: 29 CFR 1926.20 (b)(4)(a)(2)
It is understood that safety rules within individual companies vary. If a
conflict exists between the safety procedures contained in this manual
and the rules of a using company, the more stringent rule should take
precedence.
III. INTRODUCTION
This manual is filled with time-saving and money-saving information regarding your
Cretors machine. There is nothing more important than the safety aids and warnings
that are throughout this document. The Safety Alert Symbol is used to identify topics of
primary safety concern wherever they appear. Furthermore, a separate section has
been included which deals exclusively with service and accident prevention.
If, after reviewing this manual, anything is unclear or technical problems are
encountered, contact the distributor from whom you purchased your machine for
assistance. If there are any additional questions, feel free to contact our Customer
Service Department at the address and/or phone number listed on the last page of this
manual. Always have the model and serial number of your machine available to assist
in obtaining the correct information.
