CRHouse Technology HE100ED Manuale utente

USER MANUAL

HDMI Over IP Encoder

HDMI Over IP Decoder

HDMI Matrix Extender

Model No：HE100ED-T(Encoder)

HE100ED-S(Decoder)

Enjoy the vivid world!

REMARK

Manufacturer does not make any commitment to update the information contained herein.

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these

instructions carefully before connecting, operating or adjusting this product. Please keep this manual

for future reference.

The products are designed to make your A/V device use more convenient, comfortable, productive

and cost-efficient.

The HDMI Encoder/Decoder by IP is one set of HDMI signal extend device that follow the standard

TCP/IP to transmit the HD signal by the LAN. The encoder and decoder can use together to do the

complete transmission of stream media.Also, the RS232 control signal can be transmitted to the

decoder device to do distance control. By the LAN, it can let the HD signal to be transmitted to long

distance and expand the AV use. Many set of encoder and decoder can integrate one multi-channel

AV Matrix, TV Wall. It can do control by the client software.

Our devices offer solutions for noise, space and security concerns, data center control, information

distribution, conference room presentation, school and corporate training environments.

INTRODUCTION

FEATURES：

The encoder includes a HDMI input and a HDMI output and a RJ45 Ethernet interface.

The decoder includes a HDMI output and a RJ45 Ethernet interface.

Support HDMI resolution up to 1080P/60Hz.

Extends 1080p HDMI signals up to 100m over a single UTP Cat6 cable when no repeater.

Support for multi-layer transfer under the same LAN

Supports Point-to-Many, Many-to-point and Many-to-Many network configuration, can be configured

into multi-channel audio and video matrix by Gigabit switch.

Support TV wall mode.

Support Fast switching between different signal sources.

Support RS232 data transparent transmission over IP.

Simple control management interface.

PACKAGE CONTENTS:

PACKAGE CONTENTS

Encoder(HE100ED-T)

Decoder(HE100ED-S)

AC adapter

1PCS

User manual

1PCS

Client software Disc

1PCS

FEATURES OF THE INTERFACE:

Encoder (TX)

FIG.1 TX Front Panel View FIG.2 TX Rear Panel View

Input LED：HDMI input indicator

Status LED：System state indicator

POWER LED：Power indicator

RS232：Serial communication interface

RJ45 OUT：Ethernet output interface

HDMI OUT：HDMI signal output

HDMI IN：HDMI signal input

DC 12V：12V DC in jack

Decoder (RX)

FIG.3 RX Front Panel View FIG.4 RX Rear Panel View

Output LED：HDMI output indicator

Status LED：System state indicator

POWER LED：Power indicator

RS232：Serial communication interface

RJ45 IN：Ethernet input interface

HDMI OUT：HDMI signal output

DC 12V：12V DC in jack

RS232 Interface definition:

RS232-1: Serial communication test (factory use only)

RS232-2: Serial data transparent transmission

OPERATIONG AND CONNECTION:

Ⅰ. Streaming media player mode

1.Default Tx unicast IP address is 192.168.1.160 and can be configured from Client software.

2.PC and TX must be set to the same IP segment and net mask，e.g. the IP is 192.168.1.xxx of PC.

3.Open the network streaming on PC streaming media player (e.g. VLC). The URL is

rtsp://192.168.1.160:554/0/0/0, among them IP use the same IP address as TX.

Ⅱ. Point to point mode

1.Before using, you must bind the TX and RX by client software, Please refer to the client software

description section.

2.The network cable can be connected to a switcher or router port in the same LAN also.

TXD/RXD/GND

HD source

HDMI cable

network cable

TV/Monitor

RS232 Serial port

HD source

HDMI cable

network cable

HDMI cable

RS232 Serial port

Ⅲ. Point to many mod (Splitter)

1.Before using, you bind the TX and RX by client software, Please refer to the client software

description section.

2.TX /RX and PC must be set to the same IP segment and net mask.

Ⅳ. Many to point mod (Split screen)

1.Before using, you bind the TX and RX by client software, Please refer to the client software

description section.

2.One RX can connect the maximum number of TX is nine.

TV/Monitor

HD source

TV/Monitor

network cable

Gigabit switcher/

Router

HDMI 线

HDMI cable

Control host

network cable

RS232 Serial port

TV/Monitor

HD source

network cable

Gigabit switcher/

Router

HDMI cable

Control host

network cable

HD source

Ⅴ. Many to many mod (matrixer)

1.Must bind the TX and RX by client software, Please refer to the client software description section.

2.Multi signals transmission will take up more network resources, so the number of connected devices

is determine by the network capacity.

Client software description

Through the decoder client software you can control and management the multiple devices too easily,

you can also realize the split screen display, matrix switch, TV wall and other advanced applications.

Copy the "TVWall_setup.exe" file from the attachment disc to PC, install and open the software.

TV/Monitor

HD source

network cable

Gigabit switcher/

Router

HDMI cable

Control host

network cable

HD source

TV/Monitor

HDMI cable

network cable

1> Before use, all TX /RX and PC must be connected to a switcher or router port in the

same LAN.

2> Click "search" to open the search device window, and Click "Start searching", the list

box will automatically list all devices in the network.

3> Right click device name and select “Modify IP”. Choose all the devices and click

“Batch Modify IP " also.

The TX default IP is 192.168.1.160 and the RX default IP is 192.168.1.180. If you

need to connect multiple TX/RX, Please change to a different IP address and set

to the same IP segment and net mask, e.g. the IP is 192.168.1.xxx of PC.

4> Please click "Refresh" after modifying the IP address.

5> Select the device for you need and click "save", then will appears confirmation

dialog box. You can change the device name now, save settings when click "OK".

6> Click "Create TVWall" in the main menu, enter a new TV wall name.

7> Click "OK" into the TV wall configuration window.

You can plan the layout of the TV wall according to the number of RX. When you

arrangement the RX, click the RX device name and drag it to any one area in the

middle of the screen. Click "OK" to save and exit.

8> Double click TV wall name open the screens array interface. Click TX device name

and drag it to any one area in the middle of the screen, then will bind the Serial

transmission channel of TX and RX.

9> Right click any area of the screens array interface, can choose the display mode of

the decoder. The modes includes 1/4/6/9 Split screen. Note: when select six or

nine split screen mode, the signal source resolution support up to 720P only.

10>Double click any area of the screens array interface into the split display interface.

Click TX device name and drag it to any one display area of the RX, you can

configure an TX for the area. Double click any one area can be full screen display.

11>Drag a new encoder into the sub screen area to cover the original encoder

automatically, and quickly switch display.

12>Right click encoder device name will pop up menu。You can delete / cancel the

device and check the serial information, or modify the encode parameter (e.g.

resolution and frame rate).

13>Right click RX device name will pop up menu。You can delete / cancel the device

and check the serial information, or modify the output resolution of the decoder.

The decoder supports resolution as follows:

800x600@60Hz, 1024x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz,

1366x768@60Hz, 1440x900@60Hz, 720P@50Hz, 720P@60Hz,

1080P@50Hz, 1080P@60Hz

14>You can manage multiple TV walls at the same time.

15> After setting, you can exit the Client software or closed and removed PC also, the

devices will continue to work in the current mode.

SPECIFICATIONS: HE100ED-T& HE100ED-S

HDMI resolution …………………………………………………………………….…..up to 1080p@60Hz

HDMI Audio Format……………………………………………………………………………….LPCM 2CH

HDMI Max bandwidth………………………………………………………….……………………...225MHz

HDMI Max baud rate…………………….………………….………………….……………………6.75Gbps

Input/Output TMDS signal ………….……………………………….……………….0.5~1.5Volts p-p(TTL)

Input/Output DDC signal ……………………………………………..……………………. 5Volts p-p (TTL)

Network transmission distance (no repeater)………………………≤100m (single UTP CAT6/24AWG)

HDMI output cable distance………………………………………...≤12m AWG26 HDMI standard cable

Encoder Max working current …………………………………………………………….…...….… 350mA

Decoder Max working current ………………………………………………….……….…….…….. 300mA

Power adapter format Input ……......….….…….…….…..…. AC 100V～240V 50HZ/60Hz, DC12V/1A

Operating Temperature range ……..…………….……………………………………………. -10 to +45℃

Storage Temperature range……………………………………………………………………. -20 to +60℃

Operating Humidity range ………………………….….……….……….10 to 90%RH (No Condensation)

Storage Humidity range………………………….….……….……………5 to 95%RH (No Condensation)

Case Dimension (L x W x H) ………………………………….………………………….121x104x28 (mm)

Encoder Weight …….………………………………………………………….………………..………. 300g

Decoder Weight …….………………………………………………………….………………..………. 305g

Notes:

Pls use the machine as the instruction listed to keep the long use lifetime of the machine.

1. The machine should be placed at the spot far from the Damp, High-Temperature, Dusty, Erosive,

and oxidative environment.

2. All parts will be free from the strong shake, hit, fall.

3. Touching the power adaptor with the wet hands is prohibited.

4. Pls hold the power adaptor head and do not pull the power cord when cut off from the socket.

5. Pls turn the power off when the machines not used for long time.

6. Pls do not open the cover and do not touch the inside parts.

7. Pls use the original factory power adaptor.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente