CRIFFER Vibrate Manuale utente
Operation
Manual
Vibrate
Occupational
Vibration Monitor
1. Introduction
2. Specification
3. Description
4. Display
5. Safety Information
6. Operation
7. Installing CrifferSuite
8. Operating CrifferSuite
9. Downloading stored assessments
10. Assessment data
11. Opening an assessment saved on PC
12. About the instrument
13. Maintenance
14. Warranty term
Table of contents
3
www.criffer.com
2
4
6
7
8
9
35
38
41
45
49
50
51
52
4. Display
5. Safety Information
6. Operation
7. Installing CrifferSuite
8. Operating CrifferSuite
7
8
9
35
38
1. Introduction
Vibration dosimeter for WBV (whole body vibration), HAV ( hand-arm vibration)
and assessment of glove effectiveness with V-glove sensor (sensor purchased sepa-
rately). Manufactured in Brazil, Vibrate meets national and international occupational
hygiene standards. CrifferSuite software provides the necessary results for prepara-
tion of assessments, studies and judicial expertise through the report such as AREN,
Crest Factor (FC) and resulting vibration dose value.
This product was developed to be simple and easy to operate, however, its applica-
tion involves risks, and to avoid them, it is important to READ THIS MANUAL
THOROUGHLY. Our expert technical support can assist you in case of doubts.
www.criffer.com
3
hygiene standards. CrifferSuite software provides the necessary results for prepara
tion of assessments, studies and judicial expertise through the report such as AREN,
Crest Factor (FC) and resulting vibration dose value.
This product was developed to be simple and easy to operate, however, its applica
-
tion involves risks, and to avoid them, it is important to
READ THIS MANUAL
2. Specifications
2.1. General
Display: Backlit LCD Alphanumeric
Simultaneous vibration measurements on the 3 axes: X, Y and Z
Whole body vibration measurements with triaxial seat accelerometer
Hand-arm vibration measurements with triaxial accelerometer and adapters
Resolution: 0,01 m/s²
WBV Frequency weighting: Wk and Wd
HAV Frequency weighting: Wh
Measurement parameters: RMS, VDV, Aeq, Am, Amr, Amep, Are, Aren, A (8), Arep
and Crest Factor
Overload indication
Calibration through sensitivity or with external calibrator
High resistance to EMI/RFI
Displays battery percentage (0 to 100%)
4www.criffer.com
Hand-arm vibration measurements with triaxial accelerometer and adapters
Resolution: 0,01 m/s²
WBV Frequency weighting: Wk and Wd
HAV Frequency weighting: Wh
Measurement parameters: RMS, VDV, Aeq, Am, Amr, Amep, Are, Aren, A (8), Arep
Power Supply: 3,7V 1800mAh rechargeable li-ion battery
Storage: up to 60 measurements (20k records)
Data logging intervals: 1 to 60s
Operation temperature: 0 to 70 ºC
Operation Humidity: 0 to 95% RH
Power Supply: 3,7V 1800mAh rechargeable li-ion battery
Battery Life: 9h
Charger: bi-volt with USB connection and USB Interface
Dimensions: 90 x 62 x 24 mm
Weight: 125g
HAV accelerometer weight: 25g
WBV accelerometer weight: 180g
2.2 Includes:
HAV accelerometer
HAV accelerometer accessories (T, bar and block adapters)
WBV accelerometer
Carrying case and USB cable
Allen wrench
Fixing screw
5www.criffer.com
Front and back sides
1. Accelerometer input
2. Display
3. On/off
4. Increment button
5. Decrement button
6. Selection/confirm button
7. USB input
8. Wearing clip
www.criffer.com.br
3. Description
7
www.criffer.com
6
3.
2
3
4
1
5
6
8
13
9. Battery Percentage
10. Number of assessments
11. Number of logs
12. Memory Usage percentage
13. Record/Pause/Stop Indicator
14. Assessment Duration
15. Z axis weighting
16. Y axis weighting
17. X axis weighting
18. Sensor disconnected
19. Type of sensor
20. Time weighting
21. Registry mode
22. Instantaneous acceleration value
23. Time
www.criffer.com.br
4. Display description
www.criffer.com
7
10
11
12
16
17
15
18
19
23
21
20
22 9
14
13. Record/Pause/Stop Indicator
14. Assessment Duration
15. Z axis weighting
16. Y axis weighting
17. X axis weighting
10
11
12
16
17
15
18
5. Safety Information
www.criffer.com
8
The vibration monitor, Vibrate, has a Li-Ion (Lithium) battery. It is a non-toxic battery,
with a large charge capacity and besides being light, it does not cause memory effect,
so Vibrate does not require complete charge cycles.
Note: The charging time for the full battery charge is 6 hours.
The instrument must never be exposed to high temperatures, which may cause defini-
tive damage or even the explosion.
Note: The charging time for the full battery charge is 6 hours.
The instrument must never be exposed to high temperatures, which may cause defini
-
tive damage or even the explosion.
6. Operating
9www.criffer.com
When using Vibrate, follow these procedures:
6.1. Before starting the Vibrate operation, the instrument must be loaded with the
bi-volt charger. Plug the charger into a wall outlet (110/220V) with the mini USB cable
(7).
Note: DO NOT charge Vibrate at hazardous areas.
(7).
When the instrument is activated, with the button (3), the following screen will
be displayed:
Device’s name: Vibrate
Manufacturer: Criffer
Firmware version: V.5.14
Date: month/day/year
After turning the instrument on, the following screen will be displayed:
10 www.criffer.com
Firmware version: V.5.14
Date: month/day/year
Indice
