Crock-Pot Wemo Manuale utente

Open your settings

menu and select

‘Wi-Fi® Network.’

Open the WeMo™ App.

The App will look for your

connected appliance.

When prompted, choose

your home network,

and enter the network

password.

Your Smart Slow Cooker will

now appear on the App’s main

menu. WeMo™ Remote Control

is now enabled. You will not

need to complete these initial

set-up steps again for your

Smart Slow Cooker.

A. Download the free WeMo™ App

from the Apple app store, Google

Play or Amazon app store.

B. Plug smart appliance into

electrical outlet.

C. Confirm your Wi-Fi® router is on.

D. Make sure your smart device

is connected to your home Wi-Fi®

network.

CONGRATULATIONS! You’re the proud owner of a Crock-Pot® Smart Slow Cooker enabled with WeMo™. Crock-Pot®, the original slow cooker brand and Belkin, the innovator of WeMo™,

bring you a state of the art slow cooker that’s designed to provide remote access to your home appliances. Easily monitor and manage your slow cooker with the assurance of quality and

reliability from brands you can trust. Now freeing yourself from daily tasks is easily done from anywhere using your smart device. More connected... more control... more convenience.

To get started, all you need is:

One or more WeMo™-enabled appliances • Apple smart device using iOS 7 or higher OR Android smart device using version 4.0 or higher • Wi-Fi® Router and internet connection

SMARTSLOW COOKER

Your Wi-Fi® network

will automatically

detect your smart

appliance(s). Select the

WeMo™ labeled Wi-Fi®

network for your

Smart Slow Cooker.

2 3 5

Quick Start Reference Guide

NOTE: To disable WeMo™ Remote

Control, disconnect the power

cord. WeMo™ Remote Control will

automatically be re-enabled when

the unit is plugged back in.

A check mark will

appear once you are

successfully connected

to your Smart Slow

Cooker. You can now

exit Settings.

We support iOS 7 and above and Android 4.0 and above.

WeMo™ Wi-Fi®CONNECTIVITY

Each WeMo™ Smart Appliance has a Wi-Fi® Indicator on the control panel to display connectivity status.

Alternating Green to Amber

Ready for Set-Up

Blinking Green

Start-up/Receiving Mode

Solid Green

Connected & Ok

Solid Amber

Poor Connection

Blinking Amber

Lost Connection

Light is O

No Power/Unplugged

Frequently Asked QUESTIONS

Why am I not seeing the WeMo™ Smart Appliance in my list of

available networks when performing the initial set-up?

If your Smart Slow Cooker is plugged in, it should appear. Sometimes it

can take a minute or so for the smart appliance and your router to find

each other. Wait 90 seconds or so. If the network doesn’t appear, turn it

o and back on and give it another 90 seconds.

Do I need to be near my WeMo™ Smart Appliance

when I perform the initial set-up?

Until the Wi-Fi® connection has been established with your smart appliance,

it’s best to have both your smart appliance and the smart device with the

WeMo™ App in the same room while performing the initial set-up steps.

How do I turn on the Remote Access capability?

Remote Access is automatically enabled after initial set-up is complete.

If it becomes shut o and you need to re-enable it, then launch the

WeMo™ App and select ‘More’ from the bottom, right side of the

screen. Next click the ‘Remote Access’ tile at the top of the list, and

then click ‘Enable Remote Access.’’

Does WeMo™ Smart Appliance require an Internet connection

to work?

Your WeMo™ Smart Appliance can be controlled without an internet

connection using the control buttons and functions directly on the

appliance. An Internet connection is only needed if you want to use

a smartphone or tablet to access your smart appliance remotely.

You will also need a Wi-Fi® router to connect your smart appliance

to your home network in order to have remote access using the

WeMo™ App.

Where can I find the MAC address for my WeMo™ Smart Appliance?

The MAC or Device MAC address is printed on a label on the bottom

of the appliance.

Is WeMo™ Smart Appliance compatible with my tablet?

The WeMo™ App is designed for smartphones (iPhone® and Android).

It will work on iOS and Android tablets, but the experience will be a

replication of the phone experience. iPad® users: be sure to select

“Search for iPhone® Apps” to find it in the App Store.

For more Troubleshooting information and help,

please visit www.crockpot.com/wemo

The Wi-Fi®CERTIFIED Logo is a certiﬁcation mark of the Wi-Fi Alliance. WeMoTM is a trademark of Belkin International, Inc. App Store is a service mark of Apple Inc. Android and the “Google Play” logo are trademarks of Google Inc.

Indice

Altri manuali Crock-Pot pentola a cottura lenta