Crosley CR7016A Manuale utente

CR7016A

Rhapsody Entertainment Center

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. –6 p.m., EST, Monday –Friday

1-888-CROSLEY

www.crosleyradio.com

English

Safety Instructions

Read and understand this entire manual before using this product. Keep these

instructions for future reference.

1. Do not use this product near water.

2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual.

3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the

power outlet only one way. If you are unable to insert the plug fully into the

outlet try reversing the plug. If the plug should still fail to fit, contact your

electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

9. Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating. Do not

block or cover these openings.

12. Unplug the product during lightning storms or when unused for long periods

of time.

English

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

Turntable

45 RPM adapter

3.5mm aux in cable

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power 12V, 2A

Power consumption 18W

Speaker 3.5”, 8Ω, 5W x 2

Turntable speed 331/3, 45, 78 RPM

Replacement needle Crosley NP6

Note:

Design and specifications are subject to change without notice.

To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will

automatically cut-off. To turn power back on and resume playing, you will need to

turn off the power and turn it on again.

English

Product Description

1. Speakers

2. Play/Pause Button

3. Stop Button

4. Bluetooth Indicator

5. Repeat Button

6. LED Display

7. Backward Skip Button

8. Power Indicator

9. Forward Skip Button

10.CD Door Open/Close

Button

11.Function Knob

12.CD Tray

13.Tuning Knob

14.Dial Scale

15.On/Off Volume

Knob

16.Turntable Platter

17.Turntable Spindle

18.Tonearm Lever

19.Auto-stop Switch

20.Tonearm

21.Speed Switch

22.Hold Down Clip

23.Power Jack

24.RCA Jacks

25.Aux In Jack

26.Headphone Jack

27.FM Wire Antenna

English

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the tie-wrap that is holding the tonearm.

3. Plug the power cord to the power outlet.

Stereo System Connection

RCA Jacks

The RCA Jacks output analog line-level signals and could be connected

directly with a pair of active/powered speakers or the appropriate input of your

stereo system.

The Red plug connects with the Right channel and the White plug connects

with the Left channel.

Note: The RCA Jacks are not designed to be connected directly to the passive/unpowered

speakers. If connected to the passive speakers, the volume level will be very low.

Aux Input Connection

You can connect an audio device to this unit and play your music through its

speakers. To do this, connect the 3.5mm auxiliary cable between your audio

device and the Aux In Jack of this unit and start playing the music.

Note: The aux in connection has the highest priority of all the functions. When there is an

auxiliary cable plugged in, the aux in connection will automatically override the Bluetooth,

turntable, CD, or radio. To resume using the other features of the unit, unplug the auxiliary

cable from the aux in jack.

Bluetooth Operation

1. Set the Function Knob to the Bluetooth position, you will hear an activation

sound from the unit.

2. Turn on the Bluetooth feature of your audio device, search for “CROSLEY

CR7016A” and pair.

3. Once your device is successfully paired with the unit, you will hear a short

confirmation sound from the unit.

4. Play and stream music from your device to the unit.

Note:

Bluetooth version –5.0

English

Turntable Operation

1. Rotate the On/Off Volume Knob to turn on the power.

2. Set the Function Knob to the PHONO position.

3. Set the Speed Switch accordingly.

4. Place the record on the turntable. Use the 45 RPM Adapter if necessary.

5. Remove the stylus protector from the stylus assembly.

Note: To avoid stylus damage, make certain the included stylus guard is in place

whenever the turntable is being moved or cleaned.

6. Release the tonearm Hold Down Clip.

Note: When the turntable is not in use, remember to lock back the hold down clip.

7. Use the Tonearm Lever to lift up the tonearm.

8. Gently move the tonearm over the record where play is desired to begin. Set

the Tonearm Lever back to the down position, the tonearm will descend

slowly onto the record and begin to playback.

9. When the record is finished playing, use the Tonearm Lever again to raise the

tonearm and then return it to the Tonearm Rest. Release the lever to let the

tonearm sit back at its rest. To suspend the playback, repeat the same steps.

10.Lock the Hold Down Clip to secure the tonearm.

Platter Auto-stop

If the Auto-stop Switch is set to the ON position, the platter will stop spinning

automatically when the record plays to the end. In some rare occasion, if the

turntable stops playing before the end of the record, set the switch to the OFF

position the turntable should overcome this issue.

English

Needle Replacement

Removing Needle

1. Gently pull down the front edge of the needle.

2. Pull needle forward.

3. Pull out and remove.

Installing Needle

1. Position the needle with its tip facing down.

2. Line up the back of the needle with the cartridge.

3. Insert the needle with its front end at a downward angle and gently lift the

front of the needle upward until it snaps into place.

Radio Operation

1. Set the Function Knob to the AM or FM position.

2. Rotate the Tuning Knob for the desired radio station.

Note:

The unit is equipped with a FM wire antenna. To FM improve reception, move the

wire around until the reception is clear without interferences. Do not connect the wire

to any additional antenna.

The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit

for better reception.

English

CD Playback Operation

1. Set the Function Knob to the CD position.

2. Press the Open/Close button to open the CD tray and put the CD in the tray

with the labeled side facing up.

3. Press the Open/Close button again to close the tray. The LED display will

show “--“ for a few seconds, then the total number of tracks on the CD. If it is

a blank CD or an unrecognizable CD, it will show “00”.

Note: MP3 or similar types of digital audio files cannot be read by the CD player.

4. Press the Play/Pause button to start the playback. The Play Indicator will light

up.

5. During the playback, press the Play/Pause button to pause and the Play

Indicator will starting flashing. Press it again to resume playback.

6. To skip to the next or previous track, press the Forward Skip or Backward

Skip button correspondingly.

7. To search fast forward or backward, press and hold the Forward Skip or

Backward Skip button correspondingly until you reach the desired time.

Release the button and the playback will resume.

8. Press the Stop button if you want to completely stop playback.

Turntable Maintenance

1. Do not touch the stylus tip with your fingers. Avoid bumping the stylus on the

turntable mat or a record’s edge.

2. Clean the stylus frequently with a soft brush with a back-to-front motion only.

3. Clean the records to get rid of dust or grease with a record cleaning brush

and record cleaning solution.

4. Clean the turntable lid and turntable cabinet with a slightly damped microfiber

cloth.

Note: Do not use a cleanser that contains alcohol, benzene, or any other harsh

chemicals, which might damage the paint and finish of the turntable.

** Crosley offers a product line of different cleaning accessories. Please

ask your retailer or check out our website www.crosleyradio.com for

more cleaning product information.

English

Troubleshooting

There is no power

No power at the power outlet.

To help save power consumption, some models will comply with the ERP

energy saving standard. When there is no audio input for 20 minutes, the

power will automatically cut-off. To turn power back on and resume playing,

turn off the main power switch and turn it on again.

Power is on, but the platter does not turn

Turntable mode is not selected.

Turntable’s drive belt has slipped off.

An aux in cable is plugged into the aux in jack, unplug it.

Turntable is spinning, but there is no sound, or sound not loud enough

Stylus protector is still on.

Tone arm is lifted up by the lever.

CD does not play

Function mode is not set to CD.

The CD is blank.

The CD is placed on the tray incorrectly with the label side facing down.

The CD has unsupported digital audio files like MP3 and similar types of

format.

The CD has too many scratches or is dirty.

Altri manuali per CR7016A

Indice

Altri manuali Crosley Lettore DVD

Crosley

Crosley Medley CR7015A Manuale utente

Manuali Lettore DVD popolari di altre marche

Sony

Sony DVP-F11 Manuale utente

Philips

Philips DVP3560K/F8 Manuale utente

LENCO

LENCO DVP-740 X2 Manuale utente

JVC

JVC XV-N650BEU Manuale utente

Aiwa

Aiwa XD-DV370 Manuale utente

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Manuale utente

Denon

Denon DVM-1805 - DVD Changer Manuale utente

Toshiba

Toshiba SD-3815 Manuale utente

Tevion

Tevion 44330 Manuale utente

Samsung

Samsung DVD-HD860 Manuale utente

Sylvania

Sylvania DP170SL8 Manuale utente

Toshiba

Toshiba SD-P1200 Manuale utente

JVC

JVC XV-D9000E Manuale utente

Dolby Laboratories

Dolby Laboratories CP650 Manuale utente

Philips

Philips DVD737K/931 Manuale utente

Denon

Denon DVD-5900 Manuale utente

Philips

Philips DVD 951 Manuale utente

Philips

Philips DVDR3460 Manuale utente