HOW DOES IT WORK?:
We always suggest to make every connections efore power Eleven on. Connect the 11-pin
ca le to Eleven and to your rotary speaker, plug the audio jack and plug your accessory or
your midi ca le.
PLEASE NOTE: "MIDI IN" or "ACCESSORY" is exclusive, you can't use oth.
If you are planning to use midi, just e sure to select one of the 5 com inations on the ta le
with the "MIDI" logo on them.
Eleven is set for midi control change 1 messages on every channel.
If you are planning to use an accessory, please e sure that your accessory type is listed in the
ta le; just plug in, make the proper selection with the 3 way selector if it's a sustain pedal, a
dual rail footswitch or an halfmoon and select the compati ility or the ehaviour using the
two 2 ways selectors.
Eleven doesn't have a power on/off utton, just plug the power supply to wall AC plug, DC
plug to 12VDC IN and Eleven will power on: red led will lit.
PLEASE NOTE: connecting power to ELEVEN will power on the rotary speaker too if the 11-
pin ca le is connected to it and if your rotary speaker is compliant with this feature.
Now you can try if everything is working as expected.
Last ut not least, regulate the GAIN trimmer near the 11 pin out in order to reach the level or
saturation desired. Normally saturation will start from 3/4 of trimmer's rotation.
PLEASE NOTE: Eleven only wor s with 11-pin compatible rotary spea ers. 5-pin, 6-pin
(and others) spea ers are not supported. Those "old-style" multipolar connectors can
be dangerous carrying 110-240 volts!
For more informations please visit: www.crumar.it
All trademarks used herein are the property of their respective owners.
Crumar is a trademark owned y:
V.M. Connection
Via Lucio Vero, 2 - 31056 Roncade (TV) - Italy
www.Crumar.it
Last update: May 2020.
