CRWSR E-Mobility SL E-mobility Manuale utente
A MARITIME STATEMENT
Below we have summarized the essential topics regarding the assembly and the use of your e-scooter so that
you can use it without any further delay and enjoy it for a long time.
Please read these instructions carefully before you use the e-scooter the first time.
All country-specific regulations referring to the usage of an electric scooter have to be compulsorily complied with.
Please inform yourself attentively.
Our site www.CRWSR.com will provide you with further information and assistance.
We wish you to enjoy your new CRWSR e-scooter to the fullest!
2
for having chosen this electric scooter with its unique quality features!
Cgris
3
iESSENTIAL INFORMATION FIRST
1. CRWSR E-Mobility SL cannot take any responsibility for damages arising
from an inadequate maintenance, handling or use.
2. This having been said, the manufacturer’s design must in no case at all be
modified (add-on parts or tuning kits, for example).
3. Please keep in mind that you are a road user, at any time and at your risk and
peril. Driving without caution can be at the root of a loss of control, of bad falls,
of crashes and even of serious injuries. This is the reason why you should always
drive with circumspection and stay alert, especially when the weather conditions
are poor, if the road is wet or the traffic confusing.
4. Prior to any ride, make sure that your CRWSR is in a perfect functioning state
(battery, brakes, lights, tyre profile and air pressure, folding joint firmly locked, dirt).
iESSENTIAL INFORMATION FIRST
5. Take care that clothes or even parts of your body can never get entangled in the wheels.
6. You should always abide by the legal provisions specific to each country
(examples: driver’s minimum age, authorized top speed, etc.).
7. We recommend you to wear a helmet while driving.
8. NEVER should you be driving when affected by drugs or alcohol.
9. Always take care of other road users, first and foremost of pedestrians.
10. NEVER mount your CRWSR with a second person and never exceed the total
payload of 120 kg (264.6 lbs).
11. Prior to the maiden ride, charge your CRWSR to a hundred percent.
4
5
UNPACKING YOUR CRWSR
Once the unpacking is completed, check your CRWSR and first of all ensure that no
component is missing, and no damage occurred during the transport.
Remove all protection plastic sheets. We recommend you to keep and store the transport
protection packaging in case the e-scooter should be returned or dispatched.
CRWSR E- SCOOTER INSTRUCTION MANUAL
VALVE PUMP ADAPTER
QUICK CHARGER
3 MM ALLEN KEY
4 SOCKET HEAD SCREWS
6
ESSENTIAL COMPONENTS AND DISPLAY
SCREEN OF YOUR CRWSR
1. Front brake
2. Rear brake
3. Left blinker
4. Right blinker
5. Control unit
6. Display screen
7. Accelerator and blinker buttons
8. Headlight
9.a Snap hook
9.b Folding hook
10. Locking latch
11. Folding joint
12. a Front brake disk
12. b Rear brake disk
13. Wooden deck
14. Kickstand
15. Rear light/Brake light
12a
1
2
3
4
5
6
7
8
9a
9b
10
11
12b
13
14
15
6
6. Speedometer
Entering the code
Total mileage
Failure / Malfunction
Code blocking
Front/Rear lights
Cruise control
Battery charge level
7
ASSEMBLING YOUR CRWSR
Unlock the folding hook/buckle on the rear
mudguard and knock over the head tube upwards.
Push up the blocking latch flat to the tube until it
is engaged.
Completely insert the steering T-bar into
the head tube.
While using the Allen key, tighten the socket
head screws in the corresponding screw holes
(on both sides).
8
RECHARGING YOUR CRWSR
Please fully recharge your CRWSR before using it for the first time.
Lift the rubber cap covering and protecting the charging port placed underneath the wooden deck.
Your CRWSR is factory-equipped with a quick and efficient charger to be used in the whole world in addition
with a commonly available adapter. Insert the plug of the charger into the charging port of your CRWSR and
then connect the charger to a power socket. The LED is lighting up red during the charging process, then
switches to green as soon as your CRWSR is completely charged.
Pull the plug off the power socket and disconnect the charger from the port.
Be sure that the rubber protection cap is adequately positioned and snaps back into place on the charger
in order to prevent potential damages due to dust, dirt or moisture infiltration.
CAUTION! DO NOT charge the battery when the temperature climbs over 40° C (104° F) or plunges
under 0° C (0° F). If you will not be using your CRWSR for a long period of time, and before storing it,
please fully charge the battery to prevent a depth discharge.
9
STEERING FUNCTIONS OF YOUR CRWSR
BLINKERS COMMAND L/R
ACCELERATOR
BUTTON « + »
BUTTON « - »
ON/OFF POWER BUTTON
10
STEERING FUNCTIONS OF YOUR CRWSR
Power ON/OFF:
Hold down the ON/OFF power button for 3 seconds to switch
the CRWSR on or off.
Turning the lights on and off:
Hold down the the “+” button for 3 seconds to turn
the lights on or off.
Entering the code in order to unblock the start on the dashboard:
As the scooter leaves the factory, the code is set on “000”.
First power on the CRWSR and then press the “+” button to enter a “0”.
Should you have pressed too far, press “+” again and again until “0” shows up
on the dashboard again. Press “ON/OFF” to validate “0”. Repeat this
procedure for the two following “0” but after the third “0” press “ON/OFF”
twice in a row to validate the code. Your entry will be confirmed by a double
beep. The total mileage of the trip will be showing up in km (or “000” on delivery).
Your CRWSR is now ready to start.
