Crye Precision RANGE BELT Manuale utente
RANGE BELT™ OPERATOR’S MANUAL
EQUIPMENT INFORMATION
INTRODUCTION .........................................................1
INCLUDED COMPONENTS...........................................2
DONNING THE LRB™
PANT BELT CONFIGURATION.................................................. 5
BUCKLE REMOVAL .....................................................7
MRB™ OUTER BELT CONFIGURATION ................................. 9
DUTY BELT CONFIGURATION ................................................. 11
NOTES FOR PROPER USE......................................................... 15
CONTENTS
1RANGE BELT™
INTRODUCTION
The Crye Precision RANGE BELT™ is a stable and comfortable platform that works
great as a duty/gun/gear belt; exible for comfort but sturdy enough to support a
holster and other heavy gear. Wear alone, over a VELCRO®inner belt, or use as an
insert in our MRB™.
FEATURES
Quick release hardware allows for easy don and doff
Pre-curved shaping for better t and added comfort
Low prole padding adds comfort for long term wear
Belt width: 1.75”
3 ways to wear: wear alone, over a VELCRO®belt or as an insert in our MRB™
Lined with low prole VELCRO®for integration with our MRB™ INNER BELT
NOT LOAD RATED. DO NOT USE FOR RAPPELLING OR AS A SAFETY RESTRAINT OF
ANY KIND. IF YOU NEED A LOAD RATED BELT, CHECK OUT OUR LRB™. CRITICAL
USE AND SAFETY WARNINGS ARE CONTAINED IN THE PRODUCT MANUAL
ACCOMPANYING THIS PRODUCT. FAILURE TO ADHERE TO THOSE USE AND
SAFETY WARNINGS MAY RESULT IN SERIOUS INJURY OR DEATH.
If you need a load-rated belt, check out our LRB™
2EQUIPMENT INFORMATION
INCLUDED COMPONENTS
1RANGE BELT
1
DONNING THE RANGE BELT™
5RANGE BELT™
PANT BELT CONFIGURATION
This belt can be used with most pants with standard-sized belt
loops. Install as you would a normal belt by passing the RANGE
BELT™ through your pant belt loops, the buckle should be
positioned left-center.
To secure the RANGE BELT™, connect the male and female ttings.
If the hardware doesn’t positively lock, the male portion may be
upside down.
1
2
6DONNING THE RANGE BELT™
NOTE: This is the smallest sizing conguration, as the belt
is closer to your body than the other congurations. Some
overlapping ends can occur. If the slack retainer elastic impedes
adjustment, you can re-route the webbing around the elastic for an
additional 1.5” of adjustment.
Excess webbing should be routed through the pant belt loops, or
rolled and stowed under the RANGE BELT™ slack retainer elastic.
3
A
7RANGE BELT™
Slotted holsters and pouches can be utilized with this belt though
you may need to remove the male hardware to allow the belt to
pass through the slots. To remove buckle, push webbing from the
bottom to create loop on top of buckle.
Pull the webbing free and remove the buckle. Use the running end
to route the belt through slots on a holster.
BUCKLE REMOVAL
1
2
Indice
Altri manuali Crye Precision Attrezzatura di sicurezza
Crye Precision
Crye Precision ADAPTIVE VEST SYSTEM Manuale utente
Crye Precision
Crye Precision AIRLITE Manuale utente
Crye Precision
Crye Precision JUMPABLE PLATE CARRIER Manuale utente
Crye Precision
Crye Precision LVS Manuale utente
Crye Precision
Crye Precision LOAD RATED BELT Manuale utente
Crye Precision
Crye Precision LRB LEG LOOPS Manuale utente
