Crystal Video Swift800 Pro Manuale utente
This user manual applies to:
Transmitter: 7103
Receiver: 3103
Version: 1.0
2020.05.26
USER MANUAL
Swift800 Pro
SHENZHEN CRYSTAL VIDEO TECHNOLOGY CO.,LTD
E-mail: Sales@cv-hd.com E-mail: Marketing@cv-hd.com
Post code：518102
Tel: +86-755-27750518-6652
Fax: +86-755-29188427
www.cv-hd.com
ADD: F12, F518 Idea Land, Baoyuan Road, Baoan Central Area,Shenzhen, China
SDI & HDMI Wireless Video
Optimal range between transmitter and receiver is between 1 meter and 30 meters
with in line of sight indoor
CONTENTS
01
About This Manual
Product Introduction 01
04
Product Interface Introduction 05
05
Receiver Interface Introduction 07
09
12
Product Specifications 18
Button Function Instructions 15
19
OLED Screen 13
Transmitter Interface Introduction
01
02
Product Installation Operation Instructions
17
Troubleshooting 21
Reminders
User Operation Instructions
CONTENTS
Connectivity diagram
Packing List
Powering on and booting up
How to Use the App
01 02
User Operation Instructions
Thank you for choosing CVW’s professional wireless high-definition video
and audio transmission product. Before using this product, please carefully
read the following reminders:
* Avoid exposing this product to direct sunlight or dusty places for a long period of time
* This product must be used within its temperature and humidity range
* Do not operate this product when it is vibrating or in a strong magnetic field
* Do not put electroconductive materials into this product’s vents
* Please do not disassemble this product without guidance from our professional staff
* Before booting up this product, confirm that the adapter’s input voltage is AC110V-220V
and that the output voltage flow meets this product’s specification requirements
* Before plugging in the battery, confirm that the battery’s voltage meets this product’s
specification requirements
About This Manual
This manual provides a detailed introduction to this product’s specifications and
instructions, operation instructions, reminders, and troubleshooting. Before using
this product, please carefully read this manual. If you have any questions or difficulties
while using this product, please promptly contact us or our distributor.
Product Introduction
This product is a wireless video transmission kit which operates in 5G band that
delivers a video resolution up to 1080P60Hz and is widely applied in field such as
live streaming, film and TV production, etc.
Connectivity diagram
00:00:00
SWIFT 800 PRO
SWIFT 800 PRO
Transmitter
This product includes a transmitter and a receiver. The transmitter supports HDMI input
or SDI input and output. The receiver supports simultaneous output of 1 HDMI circuit
and 2 SDI circuits. The figure below is the connectivity diagram you may refer to.
SDI Cable HDMI Cable
Receiver
SDI Cable HDMI Cable
Monitor
Switcher
SWIFT 800 PRO
Phone TabletTransmitter
DSLR Camera
Camera
Point-to-point mode
RSTP streaming mode
Support HDMI/SDI signal input and output
Support HDMI/SDI signal input and output (Support up to 4 mobile devices)
7103 *1
Product Model: 7103+3103
3103 *1
C-shaped
Wingnut*1
L-shaped
Mount*1
Articulating arm*1
03 04
User Manual*1
Warranty
Card*1
Product Highlights
Deliver quality and low latency video transmission
Support HD-SDI & 3G-SDI input/output and full-HD input/output via HDMI with a
resolution up to 1080P60Hz. The built-in H.264 codec delivers smooth video with
latency as low as 70ms.
Beamforming
Combine 2x2 MIMO and Beamforming technology that increases wireless beams’
directionality and makes them have a higher signal-to-noise ratio, increase the
transmission distance, and anti-interference capabilities
Point-to-Point Mode and RTSP Streaming Mode
Support two kinds of working modes: point-to-point and RSTP streaming.
The point-to-point mode supports HDMI/SDI signal input/output.
The RSTP streaming mode supports monitoring via a smart phone or a tablet.
Packing List
The standard parts are listed below.
External Antenna *5
Power Adapter
(12V/2A) *1
TX:7103
Transmitter 7103
SW IF T 80 0 PR O
USB
TX
A
HDMI In
Power Button
NP-F Battery Slot
Explanation
A
C
D
E
G
H
I
L
SMA jacks for connectors
OLED Screen
CH Button
MODE Button
DC In
Type-C USB Port
SDI Loop Out
J
SDI In
B
F
K
B
C
D
E
F
G
H
I
J
K
L
Low Battery Indicator
05 06
LOO P OUT
Product Interface Introduction
Transmitter 7103 Interface Instructions
Serial
Number
07 08
RX:3103
Receiver 3103 Interface Instructions:
Receiver 3103 Interface Introduction
SW IF T 80 0 PR O
USB
A
D
E
G
H
I
L
J
C
B
F
K
A
HDMI Out
Power Button
Explanation
OLED Screen
CH Button
MODE Button
DC In
SDI Out
SDI Out
B
C
D
E
F
G
H
I
J
K
L
Low Battery Indicator
Serial
Number
SMA jacks for connectors
Type-C USB Port
NP-F Battery Slot
09
3. Install the transmitter and receiver on
the camera using the 1/4 screw hole on
the bottom or the L-shaped mount
Product Installation Operation Instructions
10
90
SWI FT 8 00 PR O
1. Please install the antennas on the receiver and transmitter via the antenna port.
There should be a 90° angle between each antenna (the optimal installation method)
as shown in the picture.
2.
Install NP-F batteries in both the transmitter and the receiver
Battery
11 12
SWIF T 800 PRO
SWIF T 800 PRO
HDMI OUT
SDI OUT
4. Use the HDMI or SDI cable to connect the transmitter to the camera.
SDI In
HDMI In
5. Use the HDMI or SDI cable to connect the receiver to the monitor or other
receiver end (as shown in the picture).
1. Power the transmitter and receiver with three ways as follows
a) Install the NP-F battery in the NP-F battery holder on the back of the transmitter.
b) Use the attached DC power adapter
c) Use a V-mount battery (USB-D to DC power cable is needed in this case).
d) Use a power bank (5V/2A) with Type-C cable
2. Booting up the transmitter and receiver requires about 30 seconds. Wireless
connection between transmitter and receiver will be established automatically
after power up.
Powering on and booting up
CH 1
NO VIDEO
Model: 7103+3013
Network Signal
Video Signal
13 14
RTSP
Battery Charge
Fan Status
Working Mode
CH 1
WPS Device pairing
CH 1
SSID 930333
NO VIDEO
OLED Screen
Fan Status Network Signal
Operating Frequency
Video Signal
Battery Charge: (Displayed only when using Sony NP-F batteries to supply power)
Fan Status: (When the fan is on, displays rotating fan blades; when the fan is off,
displays non-rotating fan blades)
Network Signal: (When the network is not connected, displays ‘X’; When the network
successfully connects, displays the signal strength)
Video Signal: (When the signal is not recognized, displays ‘NOVIDEO’; when the signal
is recognized, displays the video format)
Working Mode: (Point-to-point mode: blank display; RTSP mode: displays ‘RTSP’)
Working Frequency: (Displays the current working frequency)
Product Pairing: (Default does not display; during pairing, it displays ‘WPS’)
SSID: (Default does not display; touch power button; displays the product’s SSID number)
Operating Frequency
Operating Frequency
Indice
Altri manuali Crystal Video Sistema microfonico
Manuali Sistema microfonico popolari di altre marche
Sennheiser
Sennheiser Evolution Wireless Digital EW-DX EM 2 Manuale utente
Alpha Technologies
Alpha Technologies RBMS Manuale utente
SWIT Electronics Co.,LTD.
SWIT Electronics Co.,LTD. CW-S150 Manuale utente
Shure
Shure UA844 Manuale utente
Panasonic
Panasonic SHFX70 - DVD HOME THEATER WIRELESS SYSTEM Manuale utente
Pyle
Pyle PDWM5000 Manuale utente