Crytec CRLS26T Manuale utente
CRLS26T LOG SPLITTER
User Manual
IMPORTANT: Read safety rules and instructions carefully before operating equipment.
-1-
- 2 -
TABLE OF CONTENTS
Content Page
Important Safe Operation Practices............................................................................................. 2
Assembling Your Log Splitter..........................................................................................................5
Know Your Log Splitter......................................................................................................................9
Operating Your Log Splitter...........................................................................................................10
Adjusting Your Log Splitter............................................................................................................ 13
Maintaining Your Log Splitter........................................................................................................13
Storing Your Log Splitter.................................................................................................................14
Troubleshooting..................................................................................................................................15
Parts List............................................................................................................................................... 17
SECTION 1: IMPORTANT SAFE OPERATION PRACTICES
WARNING: This symbol points out important safety instructions which, if not followed, could endanger
the personal safety and/or property of yourself and others. Read and follow all instructions in this manual
before attempting to operate this machine. Failure to comply with these instructions may result in
personal injury. When you see this symbol - heed its warning.
WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit
chemicals to cause cancer, birth defects or other reproductive harm.
DANGER: This machine was built to be operated according to the rules for safe operation in this manual.
As with any type of power equipment, carelessness or error on the part of the operator can result in
serious injury. This machine is capable of amputating hands and feet and throwing objects. Failure to
observe the following safety instructions could result in serious injury or death.
General Practices
1. Read, understand, and follow all instructions on the 13. If your machine is equipped with an internal combustion
machine and in the manual(s) before attempting to engine and it is intended for use near any unimproved
assemble and operate. Keep this manual in a safe place forest, brush, or grass covered land, the engine exhaust
for future and regular reference and for ordering should be equipped with a spark arrester. Make sure you
replacement parts. comply with applicable local, state, and federal codes.
2. Be familiar with all controls and proper operation. Know Take appropriate firefighting equipment with you.
how to stop the machine and disengage them quickly. 14. This machine should be used for splitting wood only, do
3. Never allow children under 16 years to operate this not use it for any other purpose.
machine. Children,16 years and over, should read and 15. Follow the instructions in the manual(s) provided with any
understand instructions and safety rules in this manual attachment(s) for this machine.
and should be trained and supervised by a parent.
4. Never allow adults to operate this machine without Preparation
proper instruction. 1. Always wear safety shoes or heavy boots.
5. Many accidents occur when more than one person 2. Always wear safety glasses or safety goggles during
operates the machine. If a helper is assisting in loading operating this machine.
logs, never activate the control until the helper is a 3. Never wear jewelry or loose clothing that might become
minimum of 10 feet away from the machine. entangled in moving or rotating parts of the machine.
-2-
- 3 -
6. Keep bystanders, helpers, pets, and children at least 20 4. Make sure machine is on level surface before operating.
feet from the machine while it is in operation. 5. Always block machine to prevent unintended movement,
7. Never allow anyone to ride on this machine. and lock in either horizontal or vertical position.
8. Never transport cargo on this machine. 6. Always operate this machine from the operator zone(s)
9. Hydraulic log splitters develop high fluid pressures during specified in the manual.
operation. Fluid escaping through a pin hole opening can 7. Logs should be cut with square ends prior to splitting.
penetrate your skin and cause blood poisoning, 8. Use log splitter in daylight or under good artificial light.
gangrene, or death. Give attention to the following 9. To avoid personal injury or property damage use
instructions at all times: extreme care in handling gasoline. Gasoline is extremely
a. Do not check for leaks with your hand. flammable and the vapors are explosive. Serious
b. Do not operate machine with frayed, kinked, personal injury can occur when gasoline is spilled on
cracked, or damaged hoses, fitting, or tubing. yourself or your clothes which can ignite. Wash your
c. Stop the engine and relieve hydraulic system skin and change immediately.
pressure before changing or adjusting fittings, a. Use only an approved gasoline container.
hoses, tubing, or other system components. b. Extinguish all cigarettes, cigars, pipes, and
d. Do not adjust the pressure settings of the pump or other sources of ignition.
valve. c. Never fuel machine indoors.
10. Leaks can be detected by passing cardboard or wood, d. Never remove gas cap or add fuel while the
while wearing protective gloves and safety glasses, over engine is hot or running.
the suspected area. Look for discoloration of cardboard e. Allow engine to cool at least two minutes
or wood. Before refueling.
11. If injured by escaping fluid, see a doctor immediately. f. Never overfill the fuel tank. Fill tank to no more
Serious infection or reaction can develop if proper than 1/2 inch below bottom of filler neck to
medical treatment is not administered immediately. provide space for fuel expansion.
12. Keep the operator zone and adjacent area clear for safe, g. Replace gasoline cap and tighten securely.
secure footing. h. If gasoline is spilled, wipe it off the engine
r more details about your unit, visit our website at and equipment. move machine to another
area. Wait 5 minutes before starting the
engine.
i. Never store the machine or fuel container inside where there is an open flame, spark or pilot light as on a water heater, space
heater, furnace,clothes dryer or other gas appliances.
j. Allow machine to cool 5 minutes before storing.
Operation
1. Before starting this machine, review the “Safety Instructions”. Failure to follow these rules may result in serious
injury to the operator or bystanders.
2. Never leave this machine unattended with the engine running.
3. Do not operate machine while under the influence of alcohol, drugs, or medication.
4. Never allow anyone to operate this machine without proper instruction.
5. Always operate this machine with all safety equipment in place and working. Make sure all controls are properly
adjusted for safe operation.
6. Do not change the engine governor settings or over-speed the engine. The governor controls the maximum safe
operating speed of the engine.
7. When loading a log, always place your hands on the sides of the log, not on the ends, and never use your foot to
help stabilize a log. Failure to do so, may result in crushed or amputated fingers, toes, hand, or foot.
-3-
- 4 -
8. Use only your hand to operate the controls.
9. Never attempt to split more than one log at a time unless the ram has fully extended and a second log is needed
to complete the separation of the first log.
10. For logs which are not cut square, the least square end and the longest portion of the log should be placed
toward the beam and wedge, and the square end placed toward the end plate.
11. When splitting in the vertical position, stabilize the log before moving the control. Split as follows:
a. Place log on the end plate and turn until it leans against the beam and is stable.
b. When splitting extra large or uneven logs, the log must be stabilized with wooden shims or split wood
between the log and end plate or ground.
12. Always keep fingers away from any cracks that open in the log while splitting. They can quickly close and pinch
or amputate your fingers.
13. Keep your work area clean. Immediately remove split wood around the machine so you do not stumble over it.
14. Never move this machine while the engine is running.
15. This machine should not be towed on any street, highway or public road without checking the existing federal,
state, or local vehicle requirements. Any licensing or modifications such as taillights, etc., needed to comply, is the
sole responsibility of the purchaser. If a “Statement of Origin” is required in your state, see your local dealer.
16. Do not tow machine faster than 45mph.
17. See Transporting the Log Splitter section in this manual for proper towing instructions once all federal, local, or
state requirements are met.
Maintenance and Storage
1. Stop the engine, disconnect the spark plug and ground it against the engine before cleaning, or inspecting the
machine.
2. Stop the engine and relieve hydraulic system pressure before repairing or adjusting fittings, hoses, tubing, or
other system components.
3. To prevent fires, clean debris and chaff from the engine and muffler areas. If the engine is equipped with a spark
arrester muffler, clean and inspect it regularly according to manufacturer’s instructions. Replace if damaged.
4. Periodically check that all nuts and bolts, hose clamps, and hydraulic fittings are tight to be sure equipment is in
safe working condition.
5. Check all safety guards and shields to be sure they are in the proper position. Never operate with safety guards,
shields, or other protective features removed.
6. The pressure relief valve is preset at the factory. Do not adjust the valve.
7. Never attempt to move this machine over hilly or uneven terrain without a tow vehicle or adequate help.
8. For your safety, replace all damaged or worn parts immediately with original equipment manufacturer’s (O.E.M.)
parts only. “Use of parts which do not meet the original equipment specifications may lead to improper performance
and compromise safety!”
9. Do not alter this machine in any manner, alterations such as attaching a rope or extension to the control lever, or
adding to the width or height of the wedge may result in personal injury.
Your Responsibility
Restrict the use of this power machine to persons who read, understand and follow the warnings and instructions in
this manual and on the machine. Some of the safety labels are reproduced here. Always follow directions on safety
labels found on your equipment.
-4-
- 5 -
-5-
- 6 -
SECTION 2: ASSEMBLING YOUR LOG SPLITTER
Unpacking from Crate
• Pry top, sides, and ends off the pallet. Set panelsaside to avoid tire puncture or personal injury.
• Remove any loose parts if included with unit (i.e.,operator’s manual, etc.)
• Loose Parts illustration as below figure shows
Ref. No.
Description
Ref. No.
Description
1
Engine
8
Pump
2
Log holder
9
Vertical holder
3
Wheel
10
Protect pipe
4
Tank
11
Beam
5
Mudguard
12
Hoses
6
Towbar
13
Forefoot
7
Towbar clamp
14
Switch plate
Before Assembling
• Disconnect spark plug wire and ground against the engine to prevent unintended starting of the log
splitter. To locate the spark plug, please refer to the engine manual, shipped with the unit.
-6-
- 7 -
Beam Assembling
• Assemble the both handle(15) to the beam(1) if they are not equipped when unpacking.
• Assemble both log holder(3) to the beam with fitting plate(16), and hook spring(4) with the beam.
• Assemble both protect pipe(2) to the beam with the hardware(5-8).
• If the two control handles(9) are not toward outside, remove and correct both of them.
• Fix the towbar clamp(10) to the beam with the hardware(11-14)
Ref. No.
Description
Ref. No.
Description
1
Beam
10
Towbar clamp
2
Protect pipe
11
M10*35 hex bolt
3
Log holder
12
M10 flat washer
4
Spring
13
M10 spring washer
5
M8*45 hex bolt
14
M10 lock nut
6
M8 flat washer
15
Handle
7
M8 spring washer
16
Fitting plate
8
M8 lock nut
17
M10*35 hardware
9
Control handle
-7-
- 8 -
Towbar Assembling
• Insert beam pin(5) through cener base(4), towbar(2) and then insert the cotter pin(6) to the beam pin.
• Assemble the forefoot(3) to the towbar with bolt(8) through the top hole and pin set(7) to the bottom hole.
Ref. No.
Description
Ref. No.
Description
1
Beam
5
Beam pin
2
Towbar
6
Cotter Pin
3
Forefoot
7
M10*70 Pin set
4
Center base
8
M10*80 bolt
-8-
- 9 -
Tank Assembling
• Assemble both mudguard(6) to the tank(1) and fasten with the M8 hardware(7-10).
• Attach to the tank axle in squence with big washer(11), wheel(2), axle washer(11) and then fasten with slotted nut(4),
insert the pin(3) to the axle hole and split the pin to prevent it from falling out, attach the cap(5) to the wheel.
Ref. No.
Description
Ref. No.
Description
1
Tank
7
M8*20 bolt
2
Wheel
8
M8 flat washer
3
Cotter pin
9
M8 spring washer
4
Soltted nut
10
M8 lock nut
5
Cap
11
Big washer
6 Mudguard
-9-
- 10 -
Tank Connection
• Insert the two bolt(5) through hook plate(5), tank, towbar(1), switch plate(6) and then fasten with lock nut.
• Hook the vertical holder(3) to the hook plate(2) if it’s not preassembled.
Ref. No.
Description
Ref. No.
Description
1
Towbar
5
M12*90 hardware
2
Hook plate
6
Switch plate
3
Vertical holder
7
Kill switch
4
M10*60 adjust bolt
-10-
Indice
Manuali Spaccalegna popolari di altre marche
Scheppach
Scheppach OX 3-1000 Istruzioni per il montaggio
Swisher
Swisher 21200 Manuale utente
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Manuale utente
Champion Power Equipment
Champion Power Equipment 90720 Manuale
Boss Industrial
Boss Industrial ES5T20 Manuale utente
Villager
Villager LSP 12 T Manuale utente
